Destruction of few fluorides to passive film of Ti-6Al-4V alloy under oxygen deficiency crevice conditions
Source abstract
Abstract
The destruction of Ti passive film cannot occur if fluorine ions (F−) are below a critical concentration in an open electrolyte with oxygen acting as a passivating agent. However, in an occluded crevice, few F− combined with oxygen deficiency environment may synergistically affect the crevice corrosion of Ti alloys. Herein, the role of few F−, which is far below the critical concentration in open solution, in the crevice corrosion of Ti-6Al-4V alloy was studied using a galvanic coupling technique combined with Kelvin probe force microscopy, atomic force microscope, and X-ray photoelectron spectroscopy. The results indicate that the F− dominate the crevice corrosion process of Ti alloys by occupying oxygen vacancies to form fluoride-titanium-oxygen compounds. A multicolored product film is generated in the crevice area, and its colors vary in the order of black-blue-purple-light yellow from the crevice edge to the interior, corresponding to the corrosion degree from severe to weak. Multicolor is formed by the interference phenomena due to the different surface roughness, thickness and chemical composition of the product film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Zhang C, Fu T, Chen H, Gao Y (2019) Research progress on crevice corrosion, plasma nitriding and surface nanocrystallization of titanium alloys. Surf Technol 48:114–123
2. Pang J, Blackwood DJ (2016) Corrosion of titanium alloys in high temperature near anaerobic seawater. Corros Sci 105:17–2410.1016/j.corsci.2015.12.011 ↗
3. Dai JH, Xia JY, Chai LJ, Murty KL, Guo N, Daymond MR (2020) Correlation of microstructural, textural characteristics and hardness of Ti-6Al-4V sheet beta-cooled at different rates. J. Mater. Sci. 55:8346–8362. https://doi.org/10.1007/s10853-020-04603-910.1007/s10853-020-04603-9 ↗
4. Li J, Pang X, Wang Y, Che Y, Zhao J (2014) A new insight into fluoride anion in electron transfer reactions. Catal Today 224:258–26210.1016/j.cattod.2013.12.007 ↗
5. Amrutha MS, Fasmin F, Ramanathan S (2017) Effect of HF concentration on anodic dissolution of titanium. J Electrochem Soc 164:H188–H19710.1149/2.0501704jes ↗
6. Wang ZB, Hu HX, Liu CB, Zheng YG (2014) The effect of fluoride ions on the corrosion behavior of pure titanium in 0.05 M sulfuric acid. Electrochim Acta 135:526–53510.1016/j.electacta.2014.05.055 ↗
7. Robin A, Meirelis JP (2007) Influence of fluoride concentration and pH on corrosion behavior of titanium in artificial saliva. J Appl Electrochem 37:511–51710.1007/s10800-006-9283-z ↗
8. Nakagawa M, Matsuya S, Udoh K (2002) Effects of fluoride and dissolved oxygen concentrations on the corrosion behavior of pure titanium, and titanium alloys. Dent Mater J 21:83–9210.4012/dmj.21.83 ↗
9. Tiyyagura HR, Kumari S, Mohan MK, Pant B, Rao MN (2019) Degradation behavior of metastable beta Ti-15-3 alloy for fastener applications. J Alloys Compd 775:518–52310.1016/j.jallcom.2018.09.366 ↗
10. He XH, Noel JJ, Shoesmith DW (2002) Temperature dependence of crevice corrosion initiation on titanium grade-2. J Electrochem Soc 149:B440–B44910.1149/1.1499501 ↗
11. Standish TE, Yari M, Shoesmith DW, Noël JJ (2017) Crevice corrosion of Grade-2 titanium in saline solutions at different temperatures and oxygen concentrations. J Electrochem Soc 164:C788–C79510.1149/2.0941713jes ↗
12. He X, Nol JJ, Shoesmith DW (2004) Effects of iron content on microstructure and crevice corrosion of Grade2 titanium. Corrosion 60:537–554
13. Yan L, Noel JJ, Shoesmith DW (2011) Hydrogen absorption into Grade-2 titanium during crevice corrosion. ElectrochimIica Acta 56:1810–182210.1016/j.electacta.2010.11.017 ↗
14. He X, Noël JJ, Shoesmith DW (2005) Crevice corrosion damage function for grade-2 titanium of iron content 0.078 wt% at 95 °C. Corros Sci 47:1177–119510.1016/j.corsci.2004.06.022 ↗
15. Horasawa N, Marek M (2010) Effect of fluoride from glass ionomer on discoloration and corrosion of titanium. Acta Biomater 6:662–66610.1016/j.actbio.2009.08.019 ↗
16. Ikeda B, Bailey M, Quinn M, Shoesmith D (1992) Localization in the crevice corrosion of titanium. Mech Behav Mater VI. https://doi.org/10.1016/B978-0-08-037890-9.50217-910.1016/B978-0-08-037890-9.50217-9 ↗
17. Taylor DF, Caramihas CA (1982) Crevice Corrosion in High-Temperature Aqueous Systems Potential/pH Measurements in Alloy 600 Crevices at 288 °C. J Electrochem Soc 129:2458–246410.1149/1.2123567 ↗
18. Wang S, Wang J (2014) Effect of grain orientation on the corrosion behavior of polycrystalline Alloy 690. Corros Sci 85:183–19210.1016/j.corsci.2014.04.014 ↗
19. Blackwood DJ (2002) Influence of the space-charge region on electrochemical impedance measurements on passive oxide films on titanium. Electrochim Acta 46:563–56910.1016/S0013-4686(00)00636-8 ↗
20. Xu ZB, Song YW, Dong KH, Shan DY, Han E-H (2018) Effects of second phases on the formation mechanism and corrosion resistance of phosphate conversion film on AZ80 Mg alloy. Anti-Corros Methods Mater 65:587–59310.1108/ACMM-05-2018-1935 ↗
21. Lee EJ, Pyun SI (1990) Analysis of nonlinear Mott-Schottky plots obtained from anodically passivating amorphous and polycrystalline TiO2 films. J Appl Electrochem 22:156–16010.1007/BF01023817 ↗
22. Kong DS, Feng YY (2009) Electrochemical anodic dissolution kinetics of titanium in fluoride-containing perchloric acid solutions at open-circuit potentials. J Electrochem Soc 156:C283–C29110.1149/1.3153148 ↗
23. De Sheng K (2008) The influence of fluoride on the physicochemical properties of anodic oxide films formed on titanium surfaces. Langmuir 24:532410.1021/la703258e ↗
24. Macdonald DD (1999) Passivity–the key to our metals-based civilization. Pure Appl Chem 71:951–97810.1351/pac199971060951 ↗
25. Jiang Z, Dai X, Norby T, Middleton H (2011) Investigation of pitting resistance of titanium based on a modified point defect model. Corros Sci 53:815–82110.1016/j.corsci.2010.11.015 ↗
26. Casillas N, Snyder SR, Smyrl WH, White HS (1991) Correlation of electron-transfer rates with the surface density of states of native and anodically grown oxide films on titanium. J Phys Chem 95:7002–700710.1021/j100171a051 ↗
27. Sazou D, Saltidou K, Pagitsas M (2012) Understanding the effect of bromides on the stability of titanium oxide films based on a point defect model. Electrochim Acta 76:48–6110.1016/j.electacta.2012.04.158 ↗
28. Wang ZB, Hu HX, Zheng YG (2018) Effects of dissolved oxygen on the electrochemical corrosion behavior of pure titanium in fluoride-containing weakly acidic solutions. J Solid State Electrochem 22:2083–209310.1007/s10008-018-3915-1 ↗
29. Nishioka S, Hyodo J, Vequizo JJM, Yamashita S, Kumagai H, Kimoto K, Yamakata A, Yamazaki Y, Maeda K (2018) Homogeneous electron doping into nonstoichiometric strontium titanate improves its photocatalytic activity for hydrogen and oxygen evolution. Acs Catal 8:7190–720010.1021/acscatal.8b01379 ↗
30. Wang ZL, Mao X, Chen P, Xiao M, Monny SA, Wang SC, Konarova M, Du AJ, Wang LZ (2019) Understanding the roles of oxygen vacancies in hematite-based photoelectrochemical processes. Angew Chem Int Ed 58:1030–103410.1002/anie.201810583 ↗
31. Moos R, Menesklou W, Hardtl KH (1995) Hall mobility of undoped n-type conducting strontium titanate single crystals between 19 K and 1373 K. Appl Phys A 61:389–39510.1007/BF01540113 ↗
32. Mang N, Huaqiao T, Daojian C, Zaicheng S, Dapeng C (2015) Bandgap engineering of Magnéli phase TinO2n–1: electron-hole self-compensation. J Chem Phys 143:37
33. Takemoto S, Hattori M, Yoshinari M, Kawada E, Oda Y (2005) Corrosion behavior and surface characterization of titanium in solution containing fluoride and albumin. Biomaterials 26:829–83710.1016/j.biomaterials.2004.03.025 ↗
34. Diamanti MV, Curto BD, Pedeferri MP (2008) Interference colors of thin oxide layers on titanium. Color Res Appl 33:221–22810.1002/col.20403 ↗
35. Jakupi P, Noel JJ, Shoesmith DW (2011) Crevice corrosion initiation and propagation on alloy-22 under galvanically-coupled and galvanostatic conditions. Corros Sci 53:3122–313010.1016/j.corsci.2011.05.061 ↗