Disintegration process of yttria-stabilized zirconia ceramics using hydrothermal conditions
Source abstract
Abstract
Capability of the recycling of high strength and high fracture toughness yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) sintered body utilizing “low-temperature annealing degradation” phenomenon was investigated. Hydrothermal treatment was employed to induce the phase transformation from tetragonal to monoclinic zirconia and to disintegrate the Y-TZP sintered body. 3 mol% Y2O3–ZrO2 specimens sintered at 1,550 °C and more were disintegrated without leaving the original appearances when the treatment temperature was between 200 °C and 400 °C. The size of the disintegrated fragments of Y-TZP sintered body was much affected by hydrothermal treatment conditions. Only with hydrothermal treatment and simple ball milling, the sintered body was pulverized into the primary particle level. This technique is expected to apply to a sustainable recycling system for the zirconia ceramics, which restrains an energy consumption compared to crushing zirconia using mechanical procedures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Nuclear materials and radiation effects · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Sasai R, Santo A, Shimizu T, Kojima T, Itoh H (2002) In: Almorza D, Brebbia CA, Sales D, Popov V (eds) Waste management and the environment. WIT Press, Sounthampton, Boston, p 13
2. Kamiya M, Kojima T, Mori Y, Sasai R, Itoh H (2002) In: Almorza D, Brebbia CA, Sales D, Popov V (eds) Waste management and the environment. IT Press, Sounthampton, Boston, p 61
3. Kamiya M, Kojima T, Sasai R, Itoh H (2004) J Ceram Soc Jpn 112:7010.2109/jcersj.112.70 ↗
4. Gao NF, Sasai R, Itoh H, Suzumura Y (2004) J Ceram Soc Jpn 112:S1378
5. Gao NF, Inagaki F, Sasai R, Itoh H, Watari K (2005) Key Eng Mater 280–283:1479
6. Gupta TK, Betchtold JH, Kuzniki RC, Kadoff LH, Rossing BR (1977) J Mater Sci 12:242110.1007/BF00553928 ↗
7. Kobayashi K, Kuwajima H, Masaki T (1981) Solid State Ionics 3/4:48910.1016/0167-2738(81)90138-7 ↗
8. Kobayashi K, Masaki T (1982) J Ceram Soc Jpn 17:427
9. Ruhle M, Claussen N, Heuer AH (1984) In: Claussen N, Ruhle M, Heuer AH (eds) Advances in ceramics, vol 12. The American Ceramic Society, Columbus, Ohio, p 352
10. Tsukuma K, Shimada M (1985) Am Ceram Soc Bull 64:210
11. Tukuma K, Ueda K, Shimada M (1985) J Am Ceram Soc 68:C4
12. Tsukuma K, Takahata T (1987) In: Becher PE, Swain MV, Somiya S (eds) Advanced structural ceramics, vol 78. Materials Research Society, Pittsburgh, PA, p 123
13. Tsukuma K, Takahata T, Shiomi M (1988) In: Claussen N., Ruhle M., Heuer AH (eds) Advances in ceramics, vol 24. The American Ceramic Society Columbus, Ohio, p 721
14. Lange FF (1982) J Mater Sci 17:23510.1007/BF00809058 ↗
15. Buiidiansky B, Huchinton JW, Lambropouros JC (1983) Int J Solids Struct 19:33710.1016/0020-7683(83)90031-8 ↗
16. Evans AG, Faber KT (1984) J Am Ceram Soc 67:25510.1111/j.1151-2916.1984.tb18842.x ↗
17. Evans AG (1984) In: Claussen N, Ruhle M, Heuer AH (eds) Advances in ceramics, vol 12. The American Ceramic Society, Columbus, Ohio, p 193
18. Faber KT (1984) In: Claussen N, Ruhle M, Heuer AH (eds) Advances in ceramics, vol 12. The American Ceramic Society, Columbus, Ohio, p 293
19. Swain MV, Hannink RHJ (1984) In: Claussen N, Ruhle M, Heuer AH (eds) Advances in ceramics, vol 12. The American Ceramic Society, Columbus, Ohio, p 225
20. Sato T, Shimada M (1984) J Am Ceram Soc 67:C21210.1111/j.1151-2916.1984.tb09624.x ↗
21. Sato T, Shimada M (1985) J Am Ceram Soc 68(6):35610.1111/j.1151-2916.1985.tb15239.x ↗
22. Sato T, Ohtaki S, Shimada M (1985) J Mater Sci 20:146610.1007/BF01026344 ↗
23. Tukuma K, Ueda K, Matushita K, Shimada M (1985) J Am Ceram Soc 68:C56
24. Tsukuma K, Shimada M (1985) J Mater Sci 4:857
25. Sato T, Shimada M (1985) J Mater Sci 20:398810.1007/BF00552389 ↗
26. Yoshimura M, Noma T, Kawabata K, Somiya S (1987) J Mater Sci Lett 6:46510.1007/BF01756800 ↗
27. Yoshimura M (1988) Am Ceram Soc Bull 67:1950
28. Yoshimura M, Noma T, Kawabata K, Somiya S (1989) J Ceram Soc Jpn Int Ed 96:263
29. Herrmann M, Seipel B, Schilm J, Nickel KG, Michael G, Krell A (1991) J Mater Sci 26:670610.1007/BF02402664 ↗
30. Lawson S (1995) J Eur Ceram Soc 15:48510.1016/0955-2219(95)00035-S ↗
31. Singh R, Gill C, Lawson S, Dransfield GP (1996) J Mater Sci 31:605510.1007/BF01152158 ↗
32. Zhu WZ, Zhang XB (1999) Scripta Metall 40:122910.1016/S1359-6462(99)00113-X ↗
33. Yamashita I, Tsukuma K (2005) J Ceram Soc Jpn 113:53010.2109/jcersj.113.530 ↗
34. Schacht M, Boukis N, Dinjus E, Ebert K, Janssen R, Meschke F, Claussen N (1998) J Eur Ceram Soc 18:237310.1016/S0955-2219(98)00244-1 ↗
35. Boukis N, Claussen N, Ebert K, Janssen R, Schacht M (1997) J Eur Ceram Soc 17:7110.1016/S0955-2219(96)00072-6 ↗
36. Ogata T, Matsubara T, Nakano H, Urabe K, Nishida T (2005) J Ceram Soc Jpn 113:677
37. Toraya H, Yoshimura M, Somiya S (1984) J Am Ceram Soc 67:C11910.1111/j.1151-2916.1984.tb19614.x ↗
38. Scott HG (1975) J Mater Sci 10:152710.1007/BF01031853 ↗
39. Garvie RC (1965) J Phys Chem 69:123810.1021/j100888a024 ↗
40. Lange FF (1982) J Mater Sci 17:22510.1007/BF00809057 ↗
41. Heuer AH, Claussen N, Krivin WM, Rühle M (1982) J Am Ceram Soc 65:64210.1111/j.1151-2916.1982.tb09946.x ↗
42. Chen IW, Chiao YH (1985) Acta Metall 33:182710.1016/0001-6160(85)90006-9 ↗
43. Chen IW, Chiao YH, Tsuzaki K (1985) Acta Metall 33:184710.1016/0001-6160(85)90007-0 ↗