Development of epoxy-based electrets
Source abstract
Abstract
The use of a diepoxide resin in the form of 1,4-butanediol diglycidyl ether as the epoxy resin, lithium perchlorate (20 wt.%) as the ionic salt, a hardener (4,7,10-trioxatridecane-1,13-diamine, 15 wt.%) as the curing agent, and a poling DC electric field of 720 V/m gives an electret that exhibits a maximum voltage of 3.4 V during poling (30 min) and a stabilized voltage of 0.67 V after depoling (7.0 h). An epoxy system that hardens slowly (such as one with less hardener) is preferred, due to the longer time during poling for the ions to remain mobile. The rate of hardening rather than that of curing is the governing factor. The lithium salt hastens the curing, but it provides the ions and stabilizes the electret voltage, particularly during the first 30 min of depoling. After the first 30 min of depoling, crosslinking significantly enhances the stability of the electret voltage. The time constant for depoling is 0.8 h during the first 30 min of depoling and is 9 h afterward. Decrease of the lithium salt proportion from 20 to 10 wt.% still provides an effective electret, although the performance is reduced. An epoxy resin produced from Bisphenol F and epichlorohydrin is ineffective due to the high viscosity and fast hardening.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High voltage insulation and dielectric phenomena · Conducting polymers and applications · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Hsieh WH, Hsu TY, Tai YC (1997) Transducers 97:1425
2. Thielemann C, Hess G (1999) In: Proceedings of SPIE – The International Society for Optical Engineering, vol 3680. Design, test and microfabrication of MEMS and MOEMS. SPIE, pp 748–75610.1117/12.341269 ↗
3. Zou Q, Tan Z, Wang Z, Pang J, Qian X, Zhang Q, Lin R, Yi S, Gong H, Liu L, Li Z (1998) J Microelectromech Syst 7:22410.1109/84.679385 ↗
4. Gaynor PT, Hughes JF (1998) Med Biol Eng Comput 36:61510.1007/BF02524433 ↗
5. Shumakov VI, Chepurov AK, Kazlove VK, Kazakova TI (1975) Polim Med 5:247
6. Scott JF, Zubko P (2005) In: Proceedings of the 12th international symposium on electrets (ISE 12), 11–14 Sep 2005, Salvador, Brazil. IEEE, pp 113–115
7. Magerramov AM, Kerimov MK, Hamidov EM (2004) In: Radiation safety problems in the Caspian region. NATO science series, IV: earth and environmental sciences, vol 41. Springer, The Netherlands, pp 205–209
8. Bauer S, Bauer-Gogonea S, Dansachumller M, Graz I, Leonhartsberger H, Salhofer H, Schwoediauer R (2003) In: Proceedings of the IEEE ultrasonics symposium, vol 1. IEEE, pp 370–376
9. Sahu DK, Khare PK, Shrivastava RK (2004) Indian J Phys 78:1205
10. Khare PK, Sahu DK, Verma A, Srivatava RK (2004) Indian J Pure Appl Phys 42:693
11. Fedosov SN, Sergeeva AV, Giacometti JA, Ribeiro PA (1999) In: Proceedings of SPIE – The International Society for Optical Engineering, vol 4017. Polymers and liquid crystals. SPIE, pp 53–5810.1117/12.373719 ↗
12. Holstein P, Leister N, Weber U, Geschke D, Binder H, Monti GA, Harris RK (1999) In: Proceedings of the 10th international symposium on electrets (ISE 10), Delphi, 22–24 Sept 1999, Greece. IEEE, pp 509–51210.1109/ISE.1999.832096 ↗
13. Eisenmenger W, Schmidt H, Dehlen B (1999) Braz J Phys 29:29510.1590/S0103-97331999000200011 ↗
14. Frensch H, Wendorff JH (1985) In: Proceedings of the 5th international symposium on electrets (ISE 5), 1985. IEEE, pp 132–137
15. Sessler GM, Gerhard-Multhaupt R, Von Seggern H (1985) In: Proceedings of the 5th international symposium on electrets (ISE 5), 1985. IEEE, pp 565–570
16. Mellinger A, Singh R, Wegener M, Wirges W, Suarez RF, Lang SB, Santos LF, Gerhard-Multhaupt R (2005) In: Proceeding of the 12th international symposium on electrets (ISE 12), 11–14 Sept 2005, Salvador, Brazil. IEEE, pp 212–215
17. Gol’tsov YI, Kramarenko IS, Panchenko EM, Zagoruiko VA, Mal’tsev VT, Sokolova TV (1983) USSR Avail VINITI Deposited Doc, (VINITI 2386-83), 19 pp
18. Gubkin AN, Popova OS, Ogloblin VA, Kuskova AM (1974) In: Sb Ref –Vses Konf “Fiz Dielektr Perspekt Ee Razvit”, Meeting Date 1973, pp 2126–2127
19. Gubkin AN, Kashtanova AM, Ogloblin VA, Rastorgueva AV (1972) USSR Tr Mosk Inst Elektron Mashinostr 21:38
20. Nakamura S, Ueshima M, Kobayashi T, Yamashita K (2003) Key Eng Mater 240–242 (Bioceramics) 44510.4028/www.scientific.net/KEM.240-242.445 ↗
21. Gerhard-Multhaupt R, Kunstler W, Gome T, Pucher A, Weinhold T, SEIß M (2000) IEEE Trans Diel Electr Insul 7:48010.1109/94.868065 ↗
22. Mellinger A, Gonzalez FC, Gerhard-Multhaupt R, Santos LF, Faria RM (2002) In: Proceedings of the 11th international symposium on electrets (ISE 11), 1–3 Oct 2002, Melbourne, Australia. IEEE, pp 7–1010.1109/ISE.2002.1042932 ↗
23. Krashennikov AI, Lipaev SM, Rybnikov YS, Sbrodova LI (1986) USSR, Lakokrasochnye Materialy i Ikh Primenenie 3:38
24. Lee H, Neville K (1957) Epoxy resins, Ch. 2. McGraw-Hill Book Company, New York
25. Peters ST (ed) (1998) Handbook of composites, Ch. 2. Chapman and Hall, New York
26. “Practical use of anhydrous LiClO4 and Mg(ClO4)2 in organic synthesis”, GFS Chemicals Inc, 2002, Issue No. 1, https://doi.org/www.gfschemicals.com , as on Aug 24, 2007
27. Silva MM, Nunes SC, Barbosa PC, Evans A, de Zea Bermudez V, Smith MJ, Ostrovskii D (2006) Electrochim Acta 52:154210.1016/j.electacta.2006.02.060 ↗
28. Santhosh P, Vasudevan T, Gopalan A, Lee K-P (2006) Mater Sci Eng B 135:6510.1016/j.mseb.2006.08.033 ↗
29. Wu C-G, Wu C-H, Lu M-I, Chuang H-J (2006) J Appl Polym Sci 99:153010.1002/app.22250 ↗
30. Wegener M, Gerhard-Multhaupt R (2003) IEEE Trans Ultrason Ferroelectr Frequency Control 50:92110.1109/TUFFC.2003.1214511 ↗
31. Koh WH, Park IH (2003) J Korean Phys Soc 42:S920
32. Nishimura Y (1999) U.S. Patent 5951959
33. Fedosov SN, Sergeeva AE (1993) J Electrostat 30:32710.1016/0304-3886(93)90086-M ↗