Titanium diboride–nickel graded materials prepared by field-activated, pressure-assisted synthesis process
Source abstract
Abstract
The formation of four-layered functionally graded material (FGM) samples of TiB2–Ni/TiB2–Ni3A + Ni/Ni3Al/Ni by field-activated, pressure-assisted synthesis process (FAPAS) was investigated. The microstructure, phase composition of the interfaces, and mechanical properties of the graded material were characterized. Elemental concentration profiles across interfaces between layers showed significant interdiffusion, indicative of formation of good bonds. The measured microhardness values of the sample increased monotonically from the nickel substrate to the surface layer (TiB2–Ni). The values ranged from about 360 to over 3500 HK over a distance of 2 mm. The results of this investigation demonstrate the feasibility of the FAPAS process for rapid formation of FGMs with good diffusion bonds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Kieback B, Neubrand A, Riedel H (2003) Mater Sci Eng A 362:8110.1016/S0921-5093(03)00578-1 ↗
2. Koizumi M (1997) Int J Self-Propag High-Temp Synth 6:295
3. Lee CS, Zhang XF, Thomas G (2001) Acta Mater 49:377510.1016/S1359-6454(01)00269-5 ↗
4. Zhu S, Wlosinski W, Xu B (2003) Mater Sci Forum 423–425:293
5. Anne G, Vanmeensel K, Vleugels J, Van der Biest O (2006) Key Eng Mater 314:21310.4028/www.scientific.net/KEM.314.213 ↗
6. Muller E, Drasar C, Schilz J, Kaysser WA (2003) Mater Sci Eng A 362:1710.1016/S0921-5093(03)00581-1 ↗
7. Meng QS, Chen SP, Munir ZA et al (2007) Mater Sci Eng A 456:33210.1016/j.msea.2006.12.016 ↗
8. Meng QS, Chen SP, Munir ZA et al (2008) Key Eng Mater 368–372:187610.4028/www.scientific.net/KEM.368-372.1876 ↗
9. Meng QS, Liu CR, Munir ZA et al (2008) J Mater Sci 43:5076. doi: https://doi.org/10.1007/s10853-008-2583-410.1007/s10853-008-2583-4 ↗
10. Carrillo-Heian EM, Gibeling JC, Munir ZA, Paulino GH (2001) Ceram Trans 114:241
11. Reddy BSB, Das K, Das S (2007) J Mater Sci 42:9366. doi: https://doi.org/10.1007/s10853-007-1827-z10.1007/s10853-007-1827-z ↗
12. Fu ZY, Liu JP, Zhang JY, Zhang QJ (2003) Key Eng Mater 249:10510.4028/www.scientific.net/KEM.249.105 ↗
13. Roine A (1999) Outokumpu HSC chemistry for Windows: chemical reaction and equilibrium software with extensive thermochemical database. Version 4.0. Outokumpu Research Oy, Finland, ISBN 952-9507-05-4A
14. Heian EM, Munir ZA (2002) Ceram Trans 135:61
15. Carrillo-Heian EM, Carpenter RD, Paulino GH, Gibeling JC, Munir ZA (2001) J Am Ceram Soc 84:96210.1111/j.1151-2916.2001.tb00775.x ↗
16. Munir ZA, Anselmi-Tamburini U, Ohyanagi M (2006) J Mater Sci 41:763. doi: https://doi.org/10.1007/s10853-006-6555-210.1007/s10853-006-6555-2 ↗
17. Shi CX, Li HD, Zhou L (2004) The handbook of material science and engineering (in Chinese). Chemical Industry Press, Beijing, p 132
18. Lide DR, Kehiaian HV (1994) CRC handbook of thermophysical and physicalchemical date. CRC Press, Boca Raton, p 788, 208
19. Asoka-Kumar P, Alatalo M, Gosh VJ, Kruseman AC, Nielson B, Lynn KG (1996) Phys Rev Lett 77:209710.1103/PhysRevLett.77.2097 ↗
20. Garay JE, Glade SC, Anselmi-tamburi U, Asoka-Kumar P, Munir ZA (2004) Appl Phys Lett 85:57310.1063/1.1774268 ↗