On the role of carbon nanotubes addition in carbon fiber-reinforced magnesium matrix composites
Source abstract
Abstract
Introducing carbon nanotubes (CNTs) to form a multiscale reinforcing structure is regarded as an unique approach to effectively improve the interface property of metal matrix composites. Curved CNTs were grafted onto the surface of the carbon fiber fabrics by injection chemical vapor deposition, and pieces of fabrics were further stitched into preform. Carbon fiber grafted with CNTs-reinforced magnesium matrix composites (CNTs-Cf/Mg) was prepared by squeeze casting. The influence of grafted CNTs on the interfacial microstructure and mechanical properties was investigated. The results showed that the carbon fiber preform grafted with CNTs was fully infiltrated with the melt matrix alloy. The larger Al8Mn5-phase particles were refined by grafted CNTs, and a transition layer of Al8Mn5/CNTs was formed on the surface of carbon fiber. Tensile strength and bending strength of the CNTs-Cf/Mg composite were significantly increased compared to the composite without grafted CNTs by 33% and 29%, respectively. The fracture morphologies confirmed that the enhanced plasticity of matrix alloy near the interface prevented obvious debonding after grafting CNTs on carbon fiber. The main operative mechanism by CNTs was attributed to optimized interface fracture behavior. This could be a very prominent method to adjust the interface structure and improve the properties of composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Zhou J, Yuan M, Li Z, Meng H, Zhang T, Qi L (2019) A great improvement of tensile properties of Cf/AZ91D composite through grafting CNTs onto the surface of the carbon fibers. Mater Sci Eng A 762:13806110.1016/j.msea.2019.138061 ↗
2. Qi L, Li S, Zhang T, Zhou J, Li H (2019) An analysis of the factors affecting strengthening in carbon fiber reinforced magnesium composites. Compos Struct 209:328–33610.1016/j.compstruct.2018.10.109 ↗
3. Shirvanimoghaddam K, Hamim SU, Karbalaei Akbari M et al (2017) Carbon fiber reinforced metal matrix composites: Fabrication processes and properties. Compos A Appl Sci Manuf 92:70–9610.1016/j.compositesa.2016.10.032 ↗
4. Zhang T, Qi L, Fu J, Zhou J, Chao X (2019) Effect of SiC nanowires addition on the interfacial microstructure and mechanical properties of the Cf-SiCNWs/AZ91D composite. J Alloy Compd 776:746–75610.1016/j.jallcom.2018.10.302 ↗
5. Zhang S, Chen G, Pei R, Wang Y, Daguang L, Wang P, Gaohui W (2015) Effect of Y content on interfacial microstructures and mechanical properties of Cf/Mg composite. Mater Sci Eng A 647:105–11210.1016/j.msea.2015.08.076 ↗
6. Li S, Qi L, Zhang T, Zhou J, Li H (2018) Interfacial failure behavior of PyC-Cf/AZ91D composite fabricated by LSEVI. J Mater Sci Technol 34:1602–160810.1016/j.jmst.2017.12.013 ↗
7. Lun Sin S, Dubé D, Tremblay R (2007) Characterization of Al–Mn particles in AZ91D investment castings. Mater Charact 58:989–99610.1016/j.matchar.2006.10.010 ↗
8. Ureña A, Rams J, Escalera MD, Sánchez M (2007) Effect of copper electroless coatings on the interaction between a molten Al-Si-Mg alloy and coated short carbon fibres. Compos A Appl Sci Manuf 38:1947–195610.1016/j.compositesa.2007.02.005 ↗
9. Alten A, Erzi E, Gürsoy Ö, Hapçı Ağaoğlu G, Dispinar D, Orhan G (2019) Production and mechanical characterization of Ni-coated carbon fibers reinforced Al-6063 alloy matrix composites. J Alloy Compd 787:543–55010.1016/j.jallcom.2019.02.043 ↗
10. Singh J, Chauhan A (2016) Characterization of hybrid aluminum matrix composites for advanced applications-a review. J Mater Res Technol 5:159–16910.1016/j.jmrt.2015.05.004 ↗
11. Yao X, Gao X, Jiang J, Xu C, Deng C, Wang J (2018) Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites. Compos B Eng 132:170–17710.1016/j.compositesb.2017.09.012 ↗
12. Lee G, Sung M, Youk JH, Lee J, Yu W (2019) Improved tensile strength of carbon nanotube-grafted carbon fiber reinforced composites. Compos Struct 220:580–59110.1016/j.compstruct.2019.04.037 ↗
13. Ou Y, González C, Vilatela JJ (2019) Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils. Compos A Appl Sci Manuf 124:10547710.1016/j.compositesa.2019.105477 ↗
14. Zhao M, Meng L, Ma L et al (2018) Layer-by-layer grafting CNTs onto carbon fibers surface for enhancing the interfacial properties of epoxy resin composites. Compos Sci Technol 154:28–3610.1016/j.compscitech.2017.11.002 ↗
15. Hu C, Liao X, Qin Q, Wang G (2019) The fabrication and characterization of high density polyethylene composites reinforced by carbon nanotube coated carbon fibers. Compos A Appl Sci Manuf 121:149–15610.1016/j.compositesa.2019.03.027 ↗
16. Chu K, Wang F, Li Y, Wang X, Huang D, Geng Z (2018) Interface and mechanical/thermal properties of graphene/copper composite with Mo2C nanoparticles grown on graphene. Compos A Appl Sci Manuf 109:267–27910.1016/j.compositesa.2018.03.014 ↗
17. Li S, Qi L, Zhang T, Zhou J, Li H (2016) Interfacial microstructure and tensile properties of carbon fiber reinforced Mg-Al-RE matrix composites. J Alloy Compd 663:686–69210.1016/j.jallcom.2015.12.165 ↗
18. Zhang X, Li S, Pan B et al (2019) Regulation of interface between carbon nanotubes-aluminum and its strengthening effect in CNTs reinforced aluminum matrix nanocomposites. Carbon 155:686–69610.1016/j.carbon.2019.09.016 ↗
19. Chen B, Shen J, Ye X, Imai H, Umeda J, Takahashi M, Kondoh K (2017) Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites. Carbon 114:198–20810.1016/j.carbon.2016.12.013 ↗
20. Zhou W, Yamaguchi T, Kikuchi K, Nomura N, Kawasaki A (2017) Effectively enhanced load transfer by interfacial reactions in multi-walled carbon nanotube reinforced Al matrix composites. Acta Mater 125:369–37610.1016/j.actamat.2016.12.022 ↗
21. Wang J, Zhang X, Miao Y et al (2018) The influences of carbon nanotubes introduced in three different phases of carbon fiber/pyrolytic carbon/silicon carbide composites on microstructure and properties of their composites. Carbon 129:409–41410.1016/j.carbon.2017.12.028 ↗
22. Goh CS, Wei J, Lee LC, Gupta M (2008) Ductility improvement and fatigue studies in Mg-CNT nanocomposites. Compos Sci Technol 68:1432–143910.1016/j.compscitech.2007.10.057 ↗
23. Sharma SP, Lakkad SC (2020) Comparative study of the effect of fiber surface treatments on the flexural and interlaminar shear strength of carbon fiber-reinforced composites. Mater Today Commun 24:10101610.1016/j.mtcomm.2020.101016 ↗
24. Yang L, Zhou X, Liang S et al (2015) Effect of traces of silicon on the formation of Fe-rich particles in pure magnesium and the corrosion susceptibility of magnesium. J Alloy Compd 619:396–40010.1016/j.jallcom.2014.09.040 ↗
25. Kim KJ, Yu W, Youk JH, Lee J (2012) Degradation and healing mechanisms of carbon fibers during the catalytic growth of carbon nanotubes on their surfaces. Acs Appl Mater Inter 4:2250–225810.1021/am3002499 ↗
26. Kim KJ, Kim J, Yu W, Youk JH, Lee J (2013) Improved tensile strength of carbon fibers undergoing catalytic growth of carbon nanotubes on their surface. Carbon 54:258–26710.1016/j.carbon.2012.11.037 ↗
27. Yao Z, Wang C, Wang Y et al (2019) Tensile properties of CNTs-grown carbon fiber fabrics prepared using Fe-Co bimetallic catalysts at low temperature. J Mater Sci 54:11841–11847. https://doi.org/10.1007/s10853-019-03741-z10.1007/s10853-019-03741-z ↗
28. Chao X, Qi L, Tian W, Hou X, Ma W, Li H (2018) Numerical evaluation of the influence of porosity on bending properties of 2D carbon/carbon composites. Compos B Eng 136:72–8010.1016/j.compositesb.2017.10.027 ↗
29. Qian H, Bismarck A, Greenhalgh ES, Shaffer MSP (2010) Synthesis and characterisation of carbon nanotubes grown on silica fibres by injection CVD. Carbon 48:277–28610.1016/j.carbon.2009.09.029 ↗
30. Zhou JM, Meng HM, Han LJ, Qi LH (2019) Mechanical properties of CNTS-Grafted carbon Fiber/Magnesium composites prepared by Liquid-Solid infiltration extrusion. Solid State Phenom 285:121–12610.4028/www.scientific.net/SSP.285.121 ↗
31. Sonoyama N, Ohshita M, Nijubu A, Nishikawa H, Yanase H, Hayashi J, Chiba T (2006) Synthesis of carbon nanotubes on carbon fibers by means of two-step thermochemical vapor deposition. Carbon 44:1754–176110.1016/j.carbon.2005.12.039 ↗
32. Han G, Liu X (2009) Duplex nucleation in Mg-Al-Zn-Mn alloys with carbon inoculation. J Alloy Compd 487:194–19710.1016/j.jallcom.2009.08.037 ↗
33. Patel HA, Chen DL, Bhole SD, Sadayappan K (2010) Microstructure and tensile properties of thixomolded magnesium alloys. J Alloy Compd 496:140–14810.1016/j.jallcom.2010.02.042 ↗
34. Zhang L, Jia R, Li D, Zhang W, Guo F (2015) Effect of intermetallic phases on corrosion initiation of AZ91 alloy with rare earth y addition. J Mater Sci Technol 31:504–51110.1016/j.jmst.2014.09.018 ↗
35. Yao Z, Wang C, Wang Y et al (2019) Tensile properties of CNTs-grown carbon fiber fabrics prepared using Fe–Co bimetallic catalysts at low temperature. J Mater Sci 54:11841–11847. https://doi.org/10.1007/s10853-019-03741-z10.1007/s10853-019-03741-z ↗
36. Guo C, Luo X, Shah WA, Huang B, Li JK, Umer MA, Yang YQ (2020) Mechanical and electrical properties of carbon nanotube-reinforced Al2O3 nanocomposites. J Mater Sci 55:8728–8740. https://doi.org/10.1007/s10853-019-04173-510.1007/s10853-019-04173-5 ↗
37. Wang B, Wang Y, Zhou Y et al (2019) Multi-walled carbon nanotube-reinforced boron carbide matrix composites fabricated via ultra-high-pressure sintering. J Mater Sci 54:11084–11095. https://doi.org/10.1007/s10853-019-03677-410.1007/s10853-019-03677-4 ↗
38. Fan J, Zhuang D, Zhao D, Zhang G, Wu M, Wei F, Fan Z (2006) Toughening and reinforcing alumina matrix composite with single-wall carbon nanotubes. Appl Phys Lett 89:12191010.1063/1.2336623 ↗
39. Tzounis L, Kirsten M, Simon F, Mäder E, Stamm M (2014) The interphase microstructure and electrical properties of glass fibers covalently and non-covalently bonded with multiwall carbon nanotubes. Carbon 73:310–32410.1016/j.carbon.2014.02.069 ↗
40. Chu K, Jia C, Jiang L, Li W (2013) Improvement of interface and mechanical properties in carbon nanotube reinforced Cu-Cr matrix composites. Mater Des 45:407–41110.1016/j.matdes.2012.09.027 ↗
41. Zhang T, Qi L, Fu J, Chao X, Li W, Li H (2019) Microstructure and thermal expansion behavior of a novel Cf-SiCNWs/AZ91D composite with dual interface. Ceram Int 45:12563–1256910.1016/j.ceramint.2019.03.073 ↗
42. Xiang Y, Wang X, Hu X et al (2019) Achieving ultra-high strengthening and toughening efficiency in carbon nanotubes/magnesium composites via constructing micro-nano layered structure. Compos A Appl Sci Manuf 119:225–23410.1016/j.compositesa.2019.02.006 ↗
43. Rong H, Dahmen K, Garmestani H, Yu M, Jacob KI (2013) Comparison of chemical vapor deposition and chemical grafting for improving the mechanical properties of carbon fiber/epoxy composites with multi-wall carbon nanotubes. J Mater Sci 48:4834–4842. https://doi.org/10.1007/s10853-012-7119-210.1007/s10853-012-7119-2 ↗
44. Wang Z, Wang Z, Xiong B, Cai C, Xu Z, Yu H (2020) Micromechanics analysis on the microscopic damage mechanism and mechanical behavior of graphite fiber-reinforced aluminum composites under transverse tension loading. J Alloy Compd 815:15245910.1016/j.jallcom.2019.152459 ↗
45. Kim KJ, Yu W, Youk JH, Lee J (2012) Factors governing the growth mode of carbon nanotubes on carbon-based substrates. Phys Chem Chem Phys 14:1404110.1039/c2cp42566a ↗
46. Mittal G, Rhee KY (2018) Chemical vapor deposition-based grafting of CNTs onto basalt fabric and their reinforcement in epoxy-based composites. Compos Sci Technol 165:84–9410.1016/j.compscitech.2018.06.018 ↗
47. Zhang L, De Greef N, Kalinka G, Bilzen BV, Locquet JL, Verpoest I, Jin Won S (2017) Carbon nanotube-grafted carbon fiber polymer composites: damage characterization on the micro-scale. Compos B Eng 126:202–21010.1016/j.compositesb.2017.06.004 ↗
48. Zhang T, Qi L, Fu J, Zhou J, Chao X (2019) Effect of SiC nanowires addition on the interfacial microstructure and mechanical properties of the C-f-SiCNWs/AZ91D composite. J Alloy Compd 776:746–75610.1016/j.jallcom.2018.10.302 ↗