Experimental and numerical investigation of interfacial microstructure in fully age-hardened 15-5 PH stainless steel during impact welding
Source abstract
Abstract
This work explores high-speed impact of fully age-hardened 15-5 PH stainless steel with itself at average impact speed of 682 m/s and impact angles ranging from 8° to 28°. It was assumed that higher angles corresponded with higher shear stresses at impact point. Microstructural examination indicated more pronounced shear-induced features at higher angles, such as nanoscale elongated grains and adiabatic shear bands. Interfacial waves, a feature associated with impact welding, were most prominent at 12° and 16°. White etching layers (WELs), a constituent formed by rapid heating and cooling at impact, were found along the impact interface and most prominently at the front and back vortices of the interfacial waves. WELs (along the interface) were softer than base materials due to overaging, whereas materials surrounding the interface were harder than base materials due to grain refinement. Numerical simulations based on smoothed particle hydrodynamics method were employed to predict the local temperature and strain distributions which supported microstructural findings. Thus, through high-speed impact experiments carried out at different angles along with advanced microscopy and numerical simulations, this work helped reveal the microstructural response of 15-5 PH stainless steel in a range of dynamic shear conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Surface Treatment and Residual Stress · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Balanethiram VS, Hu X, Altynova M, Daehn GS (1994) Hyperplasticity: enhanced formability at high rates. J. Mater Process Technol 45(1–4):595–60010.1016/0924-0136(94)90404-9 ↗
2. Lum E, Palazotto AN, Dempsey A (2017) Analysis of the effects of additive manufacturing on the material properties of 15-5PH stainless steel. In: 58th AIAA/ASCE/AHS/structures structural dynamics and materials conference, pp 1–1310.2514/6.2017-1142 ↗
3. Giovanola JH (1988) Adiabatic shear banding under pure shear loading Part I: direct observation of strain localization and energy dissipation measurements. Mech Mater 7(1):59–7110.1016/0167-6636(88)90006-3 ↗
4. Andrade U, Meyers MA, Vecchio KS, Chokshi AH (1994) Dynamic recrystallization in high-strain, high-strain-rate plastic deformation of copper. Acta Metall Mater 42(9):3183–319510.1016/0956-7151(94)90417-0 ↗
5. Ak Steel 15-5 ph® precipitation hardening stainless steel, Condition H 900
6. AK Steel, 15-5 PH stainless steel product data bulletin. http://www.aksteel.com/sites/default/files/2018-01/155ph201706.pdf . Accessed 06 Apr 2018
7. Srinath J, Manwatkar SK, Murty SVSN, Narayanan PR, Sharma SC, George KM (2015) Metallurgical analysis of a failed 17-4 PH stainless steel pyro bolt used in launch vehicle separation Systems. Mater Perform Charact 4(1):29–4410.1520/MPC20140063 ↗
8. Graves WT, Liu D, Palazotto AN (2016) Topology optimization of a penetrating warhead. In: 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, pp 1–1310.2514/6.2016-1509 ↗
9. Carpenter SH, Wittman RH (1975) Explosion welding. Annu Rev Mater Sci 5(1):177–19910.1146/annurev.ms.05.080175.001141 ↗
10. Walsh JM, Shreffler RG, Willig FJ (1953) Limiting conditions for jet formation in high velocity collisions. J Appl Phys 24(3):34910.1063/1.1721278 ↗
11. Patterson RA (1993) Fundamentals of explosion welding. ASM Handb 6:160–164
12. Hansen SR, Vivek A, Daehn GS (2015) Impact welding of aluminum alloys 6061 and 5052 by vaporizing foil actuators: heat-affected zone size and Peel strength. J Manuf Sci Eng 137(5):05101310.1115/1.4030934 ↗
13. Vivek A, Hansen SR, Liu BC, Daehn GS (2013) Vaporizing foil actuator: a tool for collision welding. J Mater Process Technol 213(12):2304–231110.1016/j.jmatprotec.2013.07.006 ↗
14. Hahn M, Weddeling C, Taber G, Vivek A, Daehn GS, Tekkaya AE (2016) Vaporizing foil actuator welding as a competing technology to magnetic pulse welding. J Mater Process Technol 230:8–2010.1016/j.jmatprotec.2015.11.010 ↗
15. Zhang Y et al (2011) Application of high velocity impact welding at varied different length scales. J Mater Process Technol 211(5):944–95210.1016/j.jmatprotec.2010.01.001 ↗
16. Vivek A, Liu BC, Hansen SR, Daehn GS (2014) Accessing collision welding process window for titanium/copper welds with vaporizing foil actuators and grooved targets. J Mater Process Technol 214(8):1583–158910.1016/j.jmatprotec.2014.03.007 ↗
17. Bahrani AS, Black TJ, Crossland B (1967) The mechanics of wave formation in explosive welding. Proc R Soc Lond A 296(1445):123–13610.1098/rspa.1967.0010 ↗
18. Greenberg BA et al (2013) The problem of intermixing of metals possessing no mutual solubility upon explosion welding (Cu–Ta, Fe–Ag, Al–Ta). Mater Charact 75:51–6210.1016/j.matchar.2012.10.011 ↗
19. Akbari Mousavi AA, Al-Hassani STS (2005) Numerical and experimental studies of the mechanism of the wavy interface formations in explosive/impact welding. J Mech Phys Solids 53(11):2501–252810.1016/j.jmps.2005.06.001 ↗
20. Liu B, Vivek A, Lin W, Prothe C, Daehn GS (2015) Solid-state dissimilar joining of Ti-Fe with Nb and Cu interlayers. Weld J 94(7):219s–224s
21. Vivek A, Hansen SR, Daehn GS (2014) High strain rate metalworking with vaporizing foil actuator: control of flyer velocity by varying input energy and foil thickness. Rev Sci Instrum 85(7):07510110.1063/1.4884647 ↗
22. Hansen SR, Vivek A, Daehn GS (2014) Control of velocity, driving pressure, and planarity during flyer launch with vaporizing foil actuator. In 6th International conference high speed form, pp 325–334
23. Johnson JR et al (2008) Coupling experiment and simulation in electro-magnetic forming using photon Doppler. In: 3rd International conference high speed form, pp 35–44
24. Liu B, Vivek A, Daehn GS (2015) Use of vaporizing foil actuator for impact welding of aluminum alloy sheets with steel and magnesium alloys10.1007/978-3-319-48248-4_77 ↗
25. Nassiri A, Vivek A, Abke T, Liu B, Lee T, Daehn G (2017) Depiction of interfacial morphology in impact welded Ti/Cu bimetallic systems using smoothed particle hydrodynamics. Appl Phys Lett 110(23):23160110.1063/1.4984742 ↗
26. Nassiri A (2015) Investigation of wavy interfacial morphology in magnetic pulsed welding: mathematical modeling, numerical simulations and experimental tests. University of New Hampshire, Durham
27. Chu Q, Zhang M, Li J, Yan C (2017) Experimental and numerical investigation of microstructure and mechanical behavior of titanium/steel interfaces prepared by explosive welding. Mater Sci Eng A 689:323–33110.1016/j.msea.2017.02.075 ↗
28. Nassiri A, Kinsey B (2016) Numerical studies on high-velocity impact welding: smoothed particle hydrodynamics (SPH) and arbitrary Lagrangian–Eulerian (ALE). J Manuf Process 24:376–38110.1016/j.jmapro.2016.06.017 ↗
29. Nassiri A, Kinsey B, Chini G (2016) Shear instability of plastically-deforming metals in high-velocity impact welding. J Mech Phys Solids 95:351–37310.1016/j.jmps.2016.06.002 ↗
30. Nassiri A, Vivek A, Abke T, Liu B, Lee T, Daehn G (2017) Depiction of interfacial morphology in impact welded Ti/Cu bimetallic systems using smoothed particle hydrodynamics. Appl Phys Lett 110:2310.1063/1.4984742 ↗
31. Liu G-R, Liu MB (2003) Smoothed particle hydrodynamics: a meshfree particle method. World Scientific, Singapore10.1142/5340 ↗
32. Anderson CE, Weiss CE, Chocron S (2011) Impact experiments into borosilicate glass at three scale sizes. J Appl Mech 78(5):05101110.1115/1.4004281 ↗
33. Li XJ, Mo F, Wang XH, Wang B, Liu KX (2012) Numerical study on mechanism of explosive welding. Sci Technol Weld Join 17(1):36–4110.1179/1362171811Y.0000000071 ↗
34. Liu B, Vivek A, Presley M, Daehn GS (2018) Dissimilar impact welding of 6111-T4, 5052-H32 aluminum alloys to 22MnB5, DP980 steels and the structure-property relationship of a strongly bonded interface. Metall Mater Trans A Phys Metall Mater Sci 49(3):899–90710.1007/s11661-017-4429-7 ↗
35. Kapil A, Lee T, Vivek A, Bockbrader J, Abke T, Daehn G (2018) Benchmarking strength and fatigue properties of spot impact welds. J Mater Process Technol 255:219–23310.1016/j.jmatprotec.2017.12.012 ↗
36. Wittman RH (1975) An experimentally verified model for predicting impact welding parameters. MS Thesis, College of Engineering, University of Denver, Denver
37. Cowan GR, Bergmann OR, Holtzman AH (1971) Mechanism of bond zone wave formation in explosion-clad metals. Metall Mater Trans B 2(November):3145–315510.1007/BF02814967 ↗
38. Hunt JN (1968) Wave formation in explosive welding. Philos Mag 17(148):669–68010.1080/14786436808223020 ↗
39. Szecket A (1985) wavy versus straight interface in the explosive welding of aluminum to steel. J Vac Sci Technol A Vac Surf Film 3(6):258810.1116/1.572839 ↗
40. Jaramillo D, Szecket A, Inal OT (1987) On the transition from a waveless to a wavy interface in explosive welding. Mater Sci Eng 91:217–22210.1016/0025-5416(87)90300-4 ↗
41. Wu J, Fang H, Yoon S, Kim H, Lee C (2006) The rebound phenomenon in kinetic spraying deposition. Scr Mater 54(4):665–66910.1016/j.scriptamat.2005.10.028 ↗
42. Mousavi SAAA, Sartangi PF (2009) Experimental investigation of explosive welding of cp-titanium/AISI 304 stainless steel. Mater Des 30(3):459–46810.1016/j.matdes.2008.06.016 ↗
43. Akbari Mousavi AA, Burley SJ, Al-Hassani STS (2005) Simulation of explosive welding using the Williamsburg equation of state to model low detonation velocity explosives. Int J Impact Eng 31(6):719–73410.1016/j.ijimpeng.2004.03.003 ↗
44. Griffiths BJ (1987) Mechanisms of white layer generation with reference to machining and deformation processes. J Tribol 109(86):52510.1115/1.3261495 ↗
45. Aramcharoen A, Mativenga PT (2008) White layer formation and hardening effects in hard turning of H13 tool steel with CrTiAlN and CrTiAlN/MoST-coated carbide tools. Int J Adv Manuf Technol 36(7–8):650–65710.1007/s00170-006-0899-2 ↗
46. Pan R, Ren R, Chen C, Zhao X (2017) The microstructure analysis of white etching layer on treads of rails. Eng Fail Anal 82(January):39–4610.1016/j.engfailanal.2017.06.018 ↗
47. Nassiri A, Chini G, Vivek A, Daehn G, Kinsey B (2015) Arbitrary Lagrangian-Eulerian finite element simulation and experimental investigation of wavy interfacial morphology during high velocity impact welding. Mater Des 88:345–35810.1016/j.matdes.2015.09.005 ↗
48. Inal OT (1985) Explosive welding of Ti–6Al–4V to mild-steel substrates. J Vac Sci Technol A Vac Surf Film 3(6):260510.1116/1.572843 ↗
49. Yang Y, Wang BF, Xiong J, Zeng Y, Chen ZP, Yang XY (2006) Adiabatic shear bands on the titanium side in the titanium/mild steel explosive cladding interface: experiments, numerical simulation, and microstructure evolution. Metall Mater Trans A 37(10):3131–313710.1007/s11661-006-0193-9 ↗
50. McAuliffe C, Waisman H (2015) A unified model for metal failure capturing shear banding and fracture. Int J Plast 65:131–15110.1016/j.ijplas.2014.08.016 ↗
51. Manikandan P, Hokamoto K, Deribas AA, Raghukandan K, Tomoshige R (2006) Explosive welding of titanium/stainless steel by controlling energetic conditions. Mater Trans 47(8):2049–205510.2320/matertrans.47.2049 ↗
52. Grignon F, Benson D, Vecchio KS, Meyers MA (2004) Explosive welding of aluminum to aluminum: analysis, computations and experiments. Int J Impact Eng 30(10):1333–135110.1016/j.ijimpeng.2003.09.049 ↗
53. Yan YB, Zhang ZW, Shen W, Wang JH, Zhang LK, Chin BA (2010) Microstructure and properties of magnesium AZ31B-aluminum 7075 explosively welded composite plate. Mater Sci Eng A 527:2241–224510.1016/j.msea.2009.12.007 ↗
54. Zhang GS, Hou SZ, Wei SZ, Li JW, Xu LJ (2011) Interface structure and properties of explosive welded beryllium bronze/steel composite plates. Appl Mech Mater 52–54:1598–160210.4028/www.scientific.net/AMM.52-54.1598 ↗
55. Nassiri A, Chini G, Kinsey B (2014) Spatial stability analysis of emergent wavy interfacial patterns in magnetic pulsed welding. CIRP Ann Manuf Technol 63(1):245–24810.1016/j.cirp.2014.03.023 ↗