Effect of molybdenum on grain growth of W-Mo-Ni-Fe heavy alloys
Source abstract
Abstract
The grain growth phenomena of tungsten heavy alloys with various concentrations of Mo were investigated. The early formation of a eutectic liquid phase with the alloying of Mo to W-Ni-Fe facilitated growth and spheroidization of tungsten grains in the initial stage of isothermal hold. However, when the concentration of molybdenum was so high as to leave behind non-dissolved Mo grains, coalescence of W grains around Mo grains resulted in the formation of larger W-Mo grains having Mo-rich cores. These larger grains later grew at the expense of the smaller grains and grain growth was statistically very fast. During grain growth in the later stage of isothermal hold, W had a higher potential than Mo to precipitate from the liquid phase onto the grains. This competitive behavior led to the gradual accumulation of Mo atoms in the liquid phase, which not only retarded the growth of grains, but also caused precipitation of intermetallic phases in the interfaces between the solid grains and liquid phase during cooling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical and Alloy Processes · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. T. Y. Chan and S. T. Lin, Metall. Mater. Trans. A, 29A (1998) 2885.10.1007/s11661-998-0195-x ↗
2. C. S. Hsu, P. C. Tsai and S. T. Lin, ibid. 32A (2001) 95.10.1007/s11661-001-0105-y ↗
3. H. Riegger, J. A. Pask and H. E. Exner, in “Sintering Processes,” vol. 13, edited by G. C. Kuczynski (Plenum Press, New York, 1980) p. 219.10.1007/978-1-4899-5301-8_19 ↗
4. R. M. German, in “Sintering Theory and Practices” (JohnWiley & Sons, New York, 1996) p. 248.
5. T. Y. Chan and S. T. Lin, J. Mater. Sci. 35 (2000) 3759.10.1023/A:1004812910331 ↗
6. C. J. Smithell and E. A. Brandes, “Metal Reference Book,” 5th ed. (Butterworth and Co., London, 1977) p. 606, 707, and 740.
7. W. H. Rhee, Y. J. Baik and D. Y. Yoon, Acta Metall. Mater. 41 (1993) 1263.10.1016/0956-7151(93)90177-T ↗
8. D. N. Yoon and W. J. Huppmann, Acta Metall. 27 (1979) 973.10.1016/0001-6160(79)90185-8 ↗
9. A. Bose and R. M. German, Metall. Trans. A 19A (1988) 3100.10.1007/BF02647738 ↗
10. P. B. Kemp and R. M. German, Metall. Mater. Trans. A 26A (1995) 2187.10.1007/BF02670690 ↗
11. Idem., J. Less-com. Met. 175 (1991) 353.10.1016/0022-5088(91)90022-V ↗
12. H. D. Park, W. H. Baik, S. J. Joong and D. Y. Yoon, Metall. Mater. Trans. A 27A (1996) 3120.10.1007/BF02663862 ↗
13. J. H. Huang, G. A. Zhou, C. Q. Zhu, S. Q. Zhang and H. Y. Lai, Mater. Let. 23 (1995) 47.10.1016/0167-577X(95)00023-2 ↗
14. A. Bose and R. M. German, Metall. Trans. A 21A (1990) 1325.10.1007/BF02698261 ↗
15. P. Villars, A. Prince and H. Okamoto, “Handbook of Ternary Alloy Phase Diagrams,” Vol. 10 (ASM International, Materials Park, OH, 1994) p. 12555.
16. K. H. Lin, C. S. Hsu and S. T. Lin, J. Refrac. Metals Hard Mater. 20 (2002) 401.10.1016/S0263-4368(02)00072-0 ↗
17. V. Glebovsky, B. Straumal, V. Semenov, V. Sursaeva and W. Gust, High Temp. Mater. Proc. 14 (1995) 67.10.1515/HTMP.1995.14.2.67 ↗