Carbon layer-modified mesoporous silica supporter for PEG to improve the thermal properties of composite phase change material
Source abstract
Abstract
An efficient shape-stabilized phase change material (PEG/CLMS) with improved thermal properties was prepared using carbon layer-modified mesoporous silica (CLMS) as the supporter of polyethylene glycol (PEG). The CLMS was fabricated based on dopamine biomimetic modification, which is facile, environmentally friendly and easy to use. The physical properties and chemical compatibility of PEG/CLMS were studied, and the results show that after the SBA-15 was modified by carbon layer, the phase change enthalpy of PEG/CLMS-b increased from 112.0 J/g to 129.9 J/g and the thermal conductivity increased from 0.34 W/(m·K) to 0.43 W/(m·K). Moreover, the PEG/CLMS-b had favourable thermostability and thermal reliability. The carbon layer modification method reported in this paper has great potential in practical applications for thermal energy storage. The thermal property improvement method developed in this study could also be used for shape-stabilized phase change materials (ssPCMs) prepared using other carriers such as diatomite and palygorskite. Therefore, a universal method was developed to improve the thermal properties of ssPCMs in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Advanced Thermoelectric Materials and Devices · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Tyagi VV, Buddhi D (2007) PCM thermal storage in buildings: a state of art. Renew Sust Energ Rev 11:1146–116610.1016/j.rser.2005.10.002 ↗
2. Saier N, Onder E (2012) Organic phase change materials and their textile applications: an overview. Thermochim Acta 540:7–6010.1016/j.tca.2012.04.013 ↗
3. Jiang Z, Qu Z (2019) Lithium-ion battery thermal management using heat pipe and phase change material during discharge-charge cycle: a comprehensive numerical study. Appl Energ 242:378–39210.1016/j.apenergy.2019.03.043 ↗
4. Wang JH, Zhou J, Zhou WL, Tong H, Huang DQ, Sun JJ, Zhang L (2013) A high speed asymmetric T-shape cell in NMOS-selected phase change memory chip. Solid State Electron 81:157–16210.1016/j.sse.2012.12.011 ↗
5. Li D, Wang J, Ding Y, Yao H, Huang Y (2019) Dynamic thermal management for industrial waste heat recovery based on phase change material thermal storage. Appl Energ 236:1168–118210.1016/j.apenergy.2018.12.040 ↗
6. Zhang X, Yin Z, Meng D, Huang Z, Wen R, Huang Y, Min X, Liu Y, Fang M, Wu X (2017) Shape-stabilized composite phase change materials with high thermal conductivity based on stearic acid and modified expanded vermiculite. Renew Energ 112:113–12310.1016/j.renene.2017.05.026 ↗
7. Zhang X, Wen R, Tang C, Wu B, Huang Z, Min X, Huang Y, Liu Y, Fang M, Wu X (2016) Thermal conductivity enhancement of polyethylene glycol/expanded perlite with carbon layer for heat storage application. Energy Build 130:113–12110.1016/j.enbuild.2016.08.049 ↗
8. Abu-Zied B, Hussein M, Asiri A (2015) Characterization, in situ electrical conductivity and thermal behavior of immobilized PEG on MCM-41. Int J Electrochem Sc 10:4873–488710.1016/S1452-3981(23)06672-5 ↗
9. Zhao Y, Min X, Huang Z, Liu Y, Wu X, Fang M (2018) Honeycomb-like structured biological porous carbon encapsulating PEG: a shape-stable phase change material with enhanced thermal conductivity for thermal energy storage. Energy Build 158:1049–106210.1016/j.enbuild.2017.10.078 ↗
10. Feng L, Zhao W, Zheng J, Frisco S, Song P, Li X (2011) The shape-stabilized phase change materials composed of polyethylene glycol and various mesoporous matrices [AC, SBA-15 and MCM-41). Sol Energy Mat Sol C 95:3550–355610.1016/j.solmat.2011.08.020 ↗
11. Qi G, Liang C, Bao R, Liu Z, Yang W, Xie B, Yang M (2014) Polyethylene glycol based shape-stabilized phase change material for thermal energy storage with ultra-low content of graphene oxide. Sol Energy Mat Sol C 123:171–17710.1016/j.solmat.2014.01.024 ↗
12. Huang X, Chen X, Li A, Atinafu D, Gao H, Dong W, Wang G (2019) Shape-stabilized phase change materials based on porous supports for thermal energy storage applications. Chem Eng J 356:641–66110.1016/j.cej.2018.09.013 ↗
13. Sarı A, Bicer A, Al-Sulaiman FA, Karaipekli A, Tyagi VV (2018) Diatomite/CNTs/PEG composite PCMs with shape-stabilized and improved thermal conductivity: preparation and thermal energy storage properties. Energy Build 164:166–17510.1016/j.enbuild.2018.01.009 ↗
14. Gao J, Zhou J, Zhang X, Shi Q, Han Z, Chen Y (2019) Facile functionalized mesoporous silica using biomimetic method as new matrix for preparation of shape stabilized phase change material with improved enthalpy. Int J Energy Res 43:8649–8659
15. Feng D, Feng Y, Qiu L (2019) Review on nanoporous composite phase change materials: fabrication, characterization, enhancement and molecular simulation. Renew Sust Energy Rev 109:578–60510.1016/j.rser.2019.04.041 ↗
16. Goitandia A, Beobide G, Aranzabe E, Aranzabe A (2015) Development of content-stable phase change composites by in ltration into inorganic porous supports. Sol Energy Mat Sol C 134:318–32810.1016/j.solmat.2014.12.010 ↗
17. Min X, Fang M, Huang Z, Liu Y, Huang Y, Wen R, Qian T, Wu X (2015) Enhanced thermal properties of novel shape-stabilized PEG composite phase change materials with radial mesoporous silica sphere for thermal energy storage. Sci Rep-UK 5:1296410.1038/srep12964 ↗
18. Feng D, Feng Y, Li P, Zang Y, Wang C, Zhang X (2020) Modified mesoporous silica filled with PEG as a shape-stabilized phase change materials for improved thermal energy storage performance. J Micropor Mesopor Mat 292:10975610.1016/j.micromeso.2019.109756 ↗
19. Gao J, Hou L, Zhang G, Gu P (2015) Facile functionalized of SBA-15 via a biomimetic coating and itsapplication in efficient removal of uranium ions fromaqueous solution. J Hazard Mater 286:325–33310.1016/j.jhazmat.2014.12.061 ↗
20. Wang X, Guo Y, Su J, Zhang X, Han N, Wang X (2018) Microstructure and thermal reliability of microcapsules containing phase change material with self-assembled graphene/organic nano-hybrid shells. Nanomaterials 8:36410.3390/nano8060364 ↗
21. Rehman T, Janjua M, Yan W (2019) A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams. Int J Heat Mass Tran 135:649–67310.1016/j.ijheatmasstransfer.2019.02.001 ↗
22. Wu S, Yan T, Kuai Z, Pan W (2020) Thermal conductivity enhancement on phase change materials for thermal energy storage: a review. Energy Storage Mater 25:251–29510.1016/j.ensm.2019.10.010 ↗
23. Li W, Wan H, Lou H, Fu Y, Qin F, He G (2017) Enhanced thermal management with microencapsulated phase change material particles in itrated in cellular metal foam. Energy 127:671–67910.1016/j.energy.2017.03.145 ↗
24. Sun D, Wang L, Li C (2013) Preparation and thermal properties of paraffin/expanded perlite composite as form-stable phase change material. Mater Lett 108:247–24910.1016/j.matlet.2013.06.105 ↗
25. Qiu J, Fan X, Shi Y, Zhang S, Jin X, Wang W, Tang B (2019) PEG/3D graphene oxide network form-stable phase change materials with ultrahigh filling content. J Mater Chem A 7(37):21371–2137710.1039/C9TA07629H ↗
26. Zhang Y, Wang J, Qiu J, Jin X, Umair M, Lu R (2019) Ag-graphene/PEG composite phase change materials for enhancing solarthermal energy conversion and storage capacity. Appl Energy 237:83–9010.1016/j.apenergy.2018.12.075 ↗
27. Cheng F, Zhang X, Wen R, Huang Z, Fang M, Liu Y, Wu X, Min X (2019) Thermal conductivity enhancement of form-stable tetradecanol/expanded perlite composite phase change materials by adding Cu powder and carbon fiber for thermal energy storage. Appl Therm Eng 156:653–65910.1016/j.applthermaleng.2019.03.140 ↗
28. Gao X, Wang Y, Zhang Z, Tan J, Cheng L, Yang W (2019) Conductive nano-carbon coating on silica by pyrolysis of polyethylene. Mater Lett 255:12656710.1016/j.matlet.2019.126567 ↗
29. Jiang B, Zeng S, Wang H, Liu D, Qian J, Cao U, Yang H, Ai X (2016) Dual core-shell structured Si@SiOx@C nanocomposite synthesized via a one-step pyrolysis method as a highly stable anode material for lithium-ion batteries. Acs Appl Mater Inter 8:31611–3161610.1021/acsami.6b09775 ↗
30. Thakur VK, Vennerberg D, Kessler MR (2014) Green aqueous surface modi cation of polypropylene for novel polymer nanocomposites. Acs Appl Mater Inter 6:9349–935610.1021/am501726d ↗
31. Beckford S, Zou M (2014) Wear resistant PTFE thin film enabled by a polydopamin adhesive layer. Appl Surf Sci 292:350–35610.1016/j.apsusc.2013.11.143 ↗
32. Zhang Q, Li Y, YangQ CH, Chen X (2018) Distinguished Cr(VI) capture with rapid and superior capability using polydopamine microsphere: behavior and mechanism. J Hazard Mater 342:732–74010.1016/j.jhazmat.2017.08.061 ↗
33. Zangmeister RA, Morris TA, Tarlov MJ (2013) Characterization of polydopamine thin films deposited at short times by autoxidation of dopamine. Langmuir 29:8619–862810.1021/la400587j ↗
34. Wang WB, Lu TT, Chen Y (2019) Mesoporous silicate/carbon composites derived from dye-loaded palygorskite clay waste for efficient removal of organic contaminants. Sci Total Environ 696:13395510.1016/j.scitotenv.2019.133955 ↗
35. Li C, Wang M, Xie B, Ma H, Chen J (2020) Enhanced properties of diatomite-based composite phase change materials for thermal energy storage. Renew Energ 147:265–27410.1016/j.renene.2019.09.001 ↗
36. Yang J, Qi G, Tang L, Bao R, Bai L, Liu Z, Yang W, Xie H, Yang M (2016) Novel photodriven composite phase change materials with bioinspired modification of BN for solar-thermal energy conversion and storage. J Mater Chem A 4:962510.1039/C6TA03733J ↗
37. Liu Y, Wu K, Luo F, Lu M, Xiao F, Du X, Zhang S, Liang L, Lu M (2019) Significantly enhanced thermal conductivity in polyvinyl alcohol composites enabled by dopamine modified graphene nanoplatelets. Compos Part A-Appl S 117:134–14310.1016/j.compositesa.2018.11.015 ↗
38. Zin G, Wu J, Rezzadori K, Petrus JCC, Luccio MD (2019) Modification of hydrophobic commercial PVDF micro itration membranes into superhydrophilic membranes by the mussel-inspired method with dopamine and polyethyleneimine. Sep Purif Technol 212:641–64910.1016/j.seppur.2018.10.014 ↗
39. Xu H, Zhou S, Liu J, Wei Y (2018) Nanospace-confined preparation of uniform nitrogen-doped graphene quantum dots for highly selective fluorescence dual-function determination of Fe3+ and ascorbic acid. RSC Adv 8:5500–550810.1039/C7RA13001E ↗
40. Ding Y, Yin G, Liao X, Huang Z, Chen X, Yao Y, Li J (2013) A convenient route to synthesize SBA-15 rods with tunable pore length for lysozyme adsorption. Micropor Mesopor Mat 170:45–5110.1016/j.micromeso.2012.11.028 ↗
41. Wang J, Yang M, Lu Y, Jin Z, Tan L, Gao H, Fan S, Dong W, Wang G (2016) Surface functionalization engineering driven crystallization behavior of polyethylene glycol confined in mesoporous silica for shape-stabilized phase change materials. Nano Energy 19:78–8710.1016/j.nanoen.2015.11.001 ↗
42. Schmidt R, Hansen EW, StiScker M, Akporiaye D, Ellestad OH (1995) Pore size determination of MCM-41 mesoporous materials by means of ’H NMR spectroscopy, N2 adsorption, and HREM. a preliminary study. J Am Chem Soc 117:4049–405610.1021/ja00119a021 ↗
43. Fulvio PF, Liang C, Dai S, Jaroniec M (2009) Mesoporous carbon materials with ultra-thin pore walls and highly dispersed nickel nanoparticles. Eur J Inorg Chem 10:605–61210.1002/ejic.200800675 ↗
44. Zhang H, Liu S, Li F, Bai S, Liu C, Tan J, Cheng H (2006) Electrochemical performance of pyrolytic carbon-coated natural graphite spheres. Carbon 44:2212–221810.1016/j.carbon.2006.02.037 ↗
45. Gun’ko VM, Savina IN, Mikhalovsky SV (2013) Cryogels: morphological, structural and adsorption characterisation. Adv Colloid Interface 187:1–4610.1016/j.cis.2012.11.001 ↗
46. Deng Y, Li J, Qian T, Guan W, Li Y, Yin X (2016) Thermal conductivity enhancement of polyethylene glycol/expanded vermiculite shape-stabilized composite phase change materials with silver nanowire for thermal energy storage. Chem Eng J 295:427–43510.1016/j.cej.2016.03.068 ↗
47. Krishnamoorthy K, Navaneethaiyer U, Mohan R, Lee J, Kim S (2012) Graphene oxide nanostructures modified multifunctional cotton fabrics. Appl Nanosci 2:119–12610.1007/s13204-011-0045-9 ↗
48. Sharma RK, Ganesan P, Tyagi VV, Metselaar HSC, Sandaran SC (2016) Thermal properties and heat storage analysis of palmitic acid-TiO2 composite as nano-enhanced organic phase change material (NEOPCM). Appl Therm Eng 99:1254–126210.1016/j.applthermaleng.2016.01.130 ↗
49. Wua H, Xiao Y, Guo Y, Miao S, Chen Q, Chen Z (2020) Functionalization of SBA-15 mesoporous materials with 2-acetylthiophene for adsorption of Cr(III) ions. Micropor Mesopor Mat 292:10975410.1016/j.micromeso.2019.109754 ↗
50. Catauroa M, Bollinoa F, Papalea F, Gallicchiob M, Pacificob S (2015) Influence of the polymer amount on bioactivity and biocompatibility of SiO2/PEG hybrid materials synthesized by sol-gel technique. Mat Sci Eng 48:548–55510.1016/j.msec.2014.12.035 ↗
51. Wang Y, Xia T, Zheng H (2011) Stearic acid/silica fume composite as form-stable phase change material forthermal energy storage. Energy Build 43:2365–237010.1016/j.enbuild.2011.05.019 ↗
52. Miller DJ, Paul DR, Freeman BD (2014) An improved method for surface modi cation of porous water puri cation membranes. Polymer 55:1375–138310.1016/j.polymer.2014.01.046 ↗
53. Fan S, Wang Y, Li Z, Zeng Z, Guo S, Huang S, Ma X (2020) Carbon layer-coated ordered mesoporous silica supported Co-based catalysts for higher alcohol synthesis: the role of carbon source. Chin Chem Lett 31:525–52910.1016/j.cclet.2019.04.070 ↗
54. Lu Z, Xu B, Zhang J, Zhu Y, Sun G, Li Z (2014) Preparation and characterization of expanded perlite/paraffin composite as form-stable phase change material. Sol Energy 108:460–46610.1016/j.solener.2014.08.008 ↗
55. Chen C, Liu W, Wang Z, Peng K, Pan W, Xi Q (2015) Novel form stable phase change materials based on the composites of polyethylene glycol/polymeric solid-solid phase change material. Sol Energy Mat Sol C 134:80–8810.1016/j.solmat.2014.11.039 ↗
56. Liu X, Sun L, Liu X, Li A, Lu F, Liu X (2013) Low-temperature fabrication of mesoporous solid strong bases by using multifunction of a carbon interlayer. Acs Appl Mater Inter 5:9823–982910.1021/am403033z ↗
57. Xi Z, Xu Y, Zhu L, Wang Y, Zhu B (2009) A facile method of surface modification for hydrophobic polymer membranes based on the adhesive behavior of poly(DOPA) and poly(dopamine). J Membrane Sci 327:244–25310.1016/j.memsci.2008.11.037 ↗
58. Wang B, Abdulla WA, Wang D, Zhao XS (2015) Three-dimensional porous LiFePO4 cathode material modified with nitrogen-doped graphene aerogel for high-power lithium ion batteries. Energ Environ Sci 8:869–87510.1039/C4EE03825H ↗
59. Lia J, Hea L, Liua T, Cao X, Zhu H (2013) Preparation and characterization of PEG/SiO2 composites as shape-stabilized phase change materials for thermal energy storage. Sol Energy Mat Sol C 118:48–5310.1016/j.solmat.2013.07.017 ↗
60. Chen Y, Liu Y, Chen Z, Shi Q, Gao J, Ding H, Tang X, Liu Y (2019) Efficient shape-stabilized phase-change material based on novel mesoporous carbon microspheres as a matrix for polyethylene glycol: preparation and thermal properties. JOM 71:4547–455510.1007/s11837-019-03787-z ↗
61. Gao H, Sun Y, Zhou J, Xu R, Duan H (2013) Mussel-inspired synthesis of polydopamine-functionalized graphene hydrogel as reusable adsorbents for water purification. Acs Appl Mater Inter 5:425–43210.1021/am302500v ↗
62. Liao X, Peng M, Liang K (2019) Enhanced electrochemical performance of SiO anode material via nitrogendoped carbon coating in a facile and green route. J Electroanal Chem 841:79–8510.1016/j.jelechem.2019.04.040 ↗
63. Wang YY, Kusumoto K, Li C-J (2012) XPS analysis of SiC films prepared by radio frequency plasma sputtering. Phys Procedia 32:95–10210.1016/j.phpro.2012.03.524 ↗
64. Chen Y, Ding H, Wang B, Shi Q, Gao J, Cui Z (2019) Dopamine functionalization for improving crystallization behaviour of polyethylene glycol in shape-stable phase change material with silica fume as the matrix. J Clean Prod 208:951–95910.1016/j.jclepro.2018.10.207 ↗
65. Embong Z, Johar S, Tajudin SAA, Sahdan MZ (2015) Surface study of stainless steel electrode deposition from soil electrokinetic (EK) treatment using X-ray photoelectron spectroscopy (XPS). AIP Conf Proc 9:1–10
66. Yu Y, Shapter GJ, Popelka-Filcoff R, Bennett JW, Ellis AV (2014) Copper removal using bio-inspired polydopamine coated natural zeolites. J Hazard Mater 273:174–18210.1016/j.jhazmat.2014.03.048 ↗
67. Wan H, Wang Y, Li Y, Wan Y, Duan Q (2015) Exceptional electrochemical performance of nitrogen-doped porous carbon for lithium storage. Carbon 82:116–12310.1016/j.carbon.2014.10.041 ↗
68. Ding Z, Chen X, Antonietti M, Wang X (2011) Synthesis of transition metal-modified carbon nitride polymers for selective hydrocarbon oxidation. Chem Sus Chem 4:274–28110.1002/cssc.201000149 ↗
69. He L, Li J, Zhou C, Zhu H, Cao X, Tang B (2014) Phase change characteristics of shape-stabilized PEG/SiO2 composites using calcium chloride-assisted and temperature-assisted sol gel methods. Sol Energy 103:448–45510.1016/j.solener.2014.02.042 ↗
70. Yoon C, Ji D (2015) Effects of In vitro degradation on the weight loss and tensile properties of PLA/LPCL/HPCL blend fibers. Fiber Polym 6:13–1810.1007/BF02875568 ↗
71. Li J, He L, Liu T, Cao X, Zhu H (2013) Preparation and characterization of PEG/SiO2 composites as shape-stabilized phase change materials for thermal energy storage. Sol Energy Mat Sol C 118:48–5310.1016/j.solmat.2013.07.017 ↗
72. Zhang D, Tian S, Xiao D (2007) Experimental study on the phase change behavior of phase change material confined in pores. Sol Energy 81:653–66010.1016/j.solener.2006.08.010 ↗
73. Wang C, Feng L, Li W, Zheng J, Tian W, Li X (2012) Shape-stabilized phase change materials based on polyethylene glycol/porous carbon composite: the influence of the pore structure of the carbon materials. Sol Energy Mat Sol C 105:21–2610.1016/j.solmat.2012.05.031 ↗