Tribological properties of carbon fabric reinforced phenolic-based composites containing CNTs@MoS2 hybrids
Source abstract
Abstract
Carbon fabric reinforced phenolic-based composites (CF/PF composites) often act a potential alternative to traditional materials which currently used in machine elements such as self-lubricating bearing, high-performance gears, and movable sealed. In the present study, the CNTs@MoS2 hybrids were synthesized by hydrothermal method, which were used as additives for their optimal wear resistance and lubricating properties in order to enhance the tribological properties of CF/PF composites. We found that the CF/PF composites with varying contents of CNTs@MoS2 hybrids showed improved self-lubricating properties under different sliding conditions, and the friction coefficient decreased as the content of additives increased. Nevertheless, the doping of 1 wt% hybrids decreased the wear resistance of CF/PF composites due to the occurrence of severe abrasive wear caused by peeling off of matrix in relatively large volume. However, with the contents of hybrids increased to 2 wt% and 4 wt%, the CF/PF composites exhibited improved wear resistance. The mechanism of wear resistance could be attributed to the excellent mechanical properties of CNTs and strong interfacial bonding force between hybrids and matrix as well as the formation of MoS2 transfer film on the surface of counterpart.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Gao T, Zhao Y, Zhou G, Han Y, Zheng Y, Shan Z, Hui D, Xu F, Qiu Y (2015) Fabrication and characterization of three dimensional woven carbon fiber/silica ceramic matrix composites. Compos Part B Eng 77:122–12810.1016/j.compositesb.2015.02.024 ↗
2. Lee L, Rudov-Clark S, Mouritz AP, Bannister MK, Herszberg I (2002) Effect of weaving damage on the tensile properties of three-dimensional woven composites. Compos Struct 57:405–41310.1016/S0263-8223(02)00108-3 ↗
3. Naresh Kumar N, Yap S, Bt Samsudin F, Khan M, Pattela Srinivasa R (2016) Effect of argon plasma treatment on tribological properties of UHMWPE/MWCNT nanocomposites. Polymers-Basel 8:29510.3390/polym8080295 ↗
4. Nie P, Min C, Chen X, Shen C, Tu W, Song H (2016) Effect of MWCNTs-COOH reinforcement on tribological behaviors of PI/MWCNTs-COOH nanocomposites under seawater lubrication. Tribol T 59:89–9810.1080/10402004.2015.1046006 ↗
5. Yuan J, Zhang Z, Yang M, Guo F, Men X, Liu W (2017) Carbon nanotubes coated hybrid-fabric composites with enhanced mechanical and thermal properties for tribological applications. Compos Part A Appl Sci Manuf 102:243–25210.1016/j.compositesa.2017.08.006 ↗
6. Li Y, Wang S, He E, Wang Q (2016) The effect of sliding velocity on the tribological properties of polymer/carbon nanotube composites. Carbon 106:106–10910.1016/j.carbon.2016.04.077 ↗
7. Dong C, Yuan C, Wang L, Liu W, Bai X, Yan X (2016) Tribological properties of water-lubricated rubber materials after modification by MoS2 nanoparticles. Sci Rep 6:3502310.1038/srep35023 ↗
8. Zalaznik M, Novak S, Huskić M, Kalin M (2016) Tribological behaviour of a PEEK polymer containing solid MoS2 lubricants. Lubr Sci 28:27–4210.1002/ls.1299 ↗
9. Ren G, Zhang Z, Zhu X, Yang M, Men X, Jiang W, Liu W (2015) WS2-filled hybrid PTFE/Nomex fabric composites with improved antiwear property. J Mater Sci 50:1065–1070. https://doi.org/10.1007/s10853-014-8663-810.1007/s10853-014-8663-8 ↗
10. Shneider M, Rapoport L, Moshkovich A, Dodiuk H, Kenig S, Tenne R, Zak A (2013) Tribological performance of the epoxy-based composite reinforced by WS2 fullerene-like nanoparticles and nanotubes. Phys Status Solidi A 210:2298–230610.1002/pssa.201329162 ↗
11. Sun L, Yang Z, Li X (2008) Tensile and tribological properties of PTFE and nanoparticles modified epoxy-based polyester fabric composites. Mater Sci Eng A 497:487–49410.1016/j.msea.2008.07.049 ↗
12. Shi S, Wu J, Huang T, Peng Y (2016) Improving the tribological performance of biopolymer coating with MoS 2 additive. Surf Coat Technol 303:250–25510.1016/j.surfcoat.2016.03.055 ↗
13. Li H, Yin Z, Jiang D, Huo Y, Cui Y (2014) Tribological behavior of hybrid PTFE/Kevlar fabric composites with nano-Si3N4 and submicron size WS2 fillers. Tribol Int 80:172–17810.1016/j.triboint.2014.07.006 ↗
14. Kalin M, Zalaznik M, Novak S (2015) Wear and friction behaviour of poly-ether-ether-ketone (PEEK) filled with graphene, WS2 and CNT nanoparticles. Wear 332–333:855–86210.1016/j.wear.2014.12.036 ↗
15. Xu ZY, Xu Y, Hu KH, Xu YF, Hu XG (2015) Formation and tribological properties of hollow sphere-like nano-MoS2 precipitated in TiO2 particles. Tribol Int 81:139–14810.1016/j.triboint.2014.08.012 ↗
16. Zhang L, Zhang G, Chang L, Wetzel B, Jim B, Wang Q (2016) Distinct tribological mechanisms of silica nanoparticles in epoxy composites reinforced with carbon nanotubes, carbon fibers and glass fibers. Tribol Int 104:225–23610.1016/j.triboint.2016.09.001 ↗
17. Golchin A, Wikner A, Emami N (2016) An investigation into tribological behaviour of multi-walled carbon nanotube/graphene oxide reinforced UHMWPE in water lubricated contacts. Tribol Int 95:156–16110.1016/j.triboint.2015.11.023 ↗
18. Yang J, Xia Y, Song H, Chen B, Zhang Z (2017) Synthesis of the liquid-like graphene with excellent tribological properties. Tribol Int 105:118–12410.1016/j.triboint.2016.09.040 ↗
19. Huang J, Li Y, Jia X, Song H (2019) Preparation and tribological properties of core-shell Fe3O4@C microspheres. Tribol Int 129:427–43510.1016/j.triboint.2018.08.036 ↗
20. Wang Z, Ren R, Song H, Jia X (2018) Improved tribological properties of the synthesized copper/carbon nanotube nanocomposites for rapeseed oil-based additives. Appl Surf Sci 428:630–63910.1016/j.apsusc.2017.09.207 ↗
21. Ji C, Yan C, Wang Y, Xiong S, Zhou F, Li Y, Sun R, Wong C (2019) Thermal conductivity enhancement of CNT/MoS2/graphene − epoxy nanocomposites based on structural synergistic effects and interpenetrating network. Compos Part B Eng 163:363–37010.1016/j.compositesb.2018.11.005 ↗
22. Chen B, Li X, Jia Y, Xu L, Liang H, Li X, Yang J, Li C, Yan F (2018) Fabrication of ternary hybrid of carbon nanotubes/graphene oxide/MoS2 and its enhancement on the tribological properties of epoxy composite coatings. Compos Part A Appl Sci Manuf 115:157–16510.1016/j.compositesa.2018.09.021 ↗
23. Chen Z, Yan H, Liu T, Niu S (2016) Nanosheets of MoS2 and reduced graphene oxide as hybrid fillers improved the mechanical and tribological properties of bismaleimide composites. Compos Sci Technol 125:47–5410.1016/j.compscitech.2016.01.020 ↗
24. Ren G, Zhang Z, Song Y, Li X, Yan J, Wang Y, Zhu X (2017) Effect of MWCNTs-GO hybrids on tribological performance of hybrid PTFE/Nomex fabric/phenolic composite. Compos Sci Technol 146:155–16010.1016/j.compscitech.2017.04.022 ↗
25. Alazemi AA, Dysart AD, Phuah XL, Pol VG, Sadeghi F (2016) MoS2 nanolayer coated carbon spheres as an oil additive for enhanced tribological performance. Carbon 110:367–37710.1016/j.carbon.2016.09.047 ↗
26. Song H, Wang B, Zhou Q, Xiao J, Jia X (2017) Preparation and tribological properties of MoS 2/graphene oxide composites. Appl Surf Sci 419:24–3410.1016/j.apsusc.2017.05.022 ↗
27. Zhang X, Luster B, Church A, Muratore C, Voevodin AA, Kohli P, Aouadi S, Talapatra S (2009) Carbon Nanotube − MoS2 Composites as Solid Lubricants. Acs Appl Mater Inter 1:735–73910.1021/am800240e ↗
28. Altavilla C, Sarno M, Ciambelli P, Senatore A, Petrone V (2013) New ‘chimie douce’ approach to the synthesis of hybrid nanosheets of MoS2 on CNT and their anti-friction and anti-wear properties. Nanotechnology 24:12560110.1088/0957-4484/24/12/125601 ↗
29. Chen B, Li X, Jia Y, Li X, Yang J, Yan F, Li C (2018) MoS2 nanosheets-decorated carbon fiber hybrid for improving the friction and wear properties of polyimide composite. Compos Part A Appl Sci Manuf 109:232–23810.1016/j.compositesa.2018.02.039 ↗
30. Yuan H, Yang S, Liu X, Wang Z, Ma L, Hou K, Yang Z, Wang J (2017) Polyimide-based lubricating coatings synergistically enhanced by MoS 2 @HCNF hybrid. Compos Part A Appl Sci Manuf 102:9–1710.1016/j.compositesa.2017.07.013 ↗
31. Chen B, Jia Y, Zhang M, Liang H, Li X, Yang J, Yan F, Li C (2019) Tribological properties of epoxy lubricating composite coatings reinforced with core-shell structure of CNF/MoS2 hybrid. Compos Part A Appl Sci Manuf 122:85–9510.1016/j.compositesa.2019.04.009 ↗
32. Liu L, Huang Z, Huang P (2016) Fabrication of coral-like MoS2 and its application in improving the tribological performance of liquid paraffin. Tribol Int 104:303–30810.1016/j.triboint.2016.09.013 ↗
33. Wenbin L, Jianfeng H, Jie F, Zhenhai L, Liyun C, Chunyan Y (2016) Effect of aramid pulp on improving mechanical and wet tribological properties of carbon fabric/phenolic composites. Tribol Int 104:237–24610.1016/j.triboint.2016.09.005 ↗
34. Fei J, Li H, Fu Y, Qi L, Zhang Y (2010) Effect of phenolic resin content on performance of carbon fiber reinforced paper-based friction material. Wear 269:534–54010.1016/j.wear.2010.05.008 ↗
35. Wenbin L, Jianfeng H, Jie F, Zhenhai L, Liyun C, Chunyan Y (2016) Effect of glass powder content on the mechanical and wet tribological properties of carbon fabric/phenolic composites. J Mater Sci 51:4419–4430. https://doi.org/10.1007/s10853-016-9754-510.1007/s10853-016-9754-5 ↗
36. Li X, Chen B, Jia Y, Li X, Yang J, Li C, Yan F (2018) Enhanced tribological properties of epoxy-based lubricating coatings using carbon nanotubes-ZnS hybrid. Surf Coat Technol 344:154–16210.1016/j.surfcoat.2018.03.006 ↗
37. Zalaznik M, Kalin M, Novak S, Jakša G (2016) Effect of the type, size and concentration of solid lubricants on the tribological properties of the polymer PEEK. Wear 364–365:31–3910.1016/j.wear.2016.06.013 ↗
38. Kandanur SS, Rafiee MA, Yavari F, Schrameyer M, Yu Z, Blanchet TA, Koratkar N (2012) Suppression of wear in graphene polymer composites. Carbon 50:3178–318310.1016/j.carbon.2011.10.038 ↗
39. Chen J, Wang L, Ren D, Chu Y, Wu Y, Meng K, Miao J, Xu X, Jiang Y (2018) Revealing the anisotropy in thermoelectric transport performances in CNT/PANI composites. Synthetic Met 239:13–2110.1016/j.synthmet.2018.03.004 ↗
40. Chen B, Wang J, Yan F (2012) Synergism of carbon fiber and polyimide in polytetrafluoroethylene-based composites: friction and wear behavior under sea water lubrication. Mater Design 36:366–37110.1016/j.matdes.2011.11.034 ↗
41. Xu Y, Hu E, Hu K, Xu Y, Hu X (2015) Formation of an adsorption film of MoS2 nanoparticles and dioctyl sebacate on a steel surface for alleviating friction and wear. Tribol Int 92:172–18310.1016/j.triboint.2015.06.011 ↗
42. Wenbin L, Jianfeng H, Jie F, Zhenhai L, Liyun C, Chunyan Y (2016) A novel preparation approach for improving the mechanical and wet tribological properties of carbon fabric/phenolic composites. Mater Design 103:356–36410.1016/j.matdes.2016.04.077 ↗