Fabrication of short carbon fiber preforms coated with pyrocarbon/SiC for liquid metal infiltration
Source abstract
Abstract
A novel method of fabricating short carbon fiber preforms was proposed for liquid metal infiltration. The preforms were shaped by wet forming and strengthened by pyrocarbon (PyC). SiC layers were prepared on carbon fibers by the reaction of SiO and PyC at 1600 °C. X-ray Diffraction, Scanning Electron Microscopy, and Energy Dispersive X-ray Spectroscopy were applied in the characterization of the preforms. Gas pressure infiltration was done to demonstrate the feasibility of the preforms for the liquid metal infiltration. The microstructure analysis indicates that carbon fibers are uniformly distributed in the preforms, and fibers are coated with an inner layer of PyC and an outer layer of SiC. The infiltration experiment proves that the prepared preforms are feasible for liquid metal infiltration under low infiltration pressure and temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Rams J, Urena A, Escalera MD, Sánchez M (2007) Composites A 38:566. doi: https://doi.org/10.1016/j.compositesa.2006.02.01010.1016/j.compositesa.2006.02.010 ↗
2. Dieringa H, Hort N, Kainer KU (2004) ATM 6:136
3. Carreno-Morelli E, Cutard T, Schaller R, Bonjour C (1998) Mater Sci Eng A 251:48. doi: https://doi.org/10.1016/S0921-5093(98)00649-210.1016/S0921-5093(98)00649-2 ↗
4. Mizumoto M, Ohgai T, Kagawa A (2005) Mater Sci Eng A 413–414:521. doi: https://doi.org/10.1016/j.msea.2005.07.06510.1016/j.msea.2005.07.065 ↗
5. Abd-Elwahed MA (1999) J Mater Process Technol 86:15210.1016/S0924-0136(98)00304-5 ↗
6. Ju CP, Chen KI, Chern-Lin JH (1994) J Mater Sci 29:5127. doi: https://doi.org/10.1007/BF0115110710.1007/BF01151107 ↗
7. Silvain JF, Proult A, Lahaye M, Douin J (2003) Composites A 34:1143. doi: https://doi.org/10.1016/j.compositesa.2003.08.00610.1016/j.compositesa.2003.08.006 ↗
8. Naplocha K, Janus A, Kaczmar JW, Samsonowicz Z (2000) J Mater Process Technol 106:119. doi: https://doi.org/10.1016/S0924-0136(00)00601-410.1016/S0924-0136(00)00601-4 ↗
9. Chiou JM, Chung DDL (1993) J Mater Sci 28:1435. doi: https://doi.org/10.1007/BF0036333510.1007/BF00363335 ↗
10. Chiou JM, W BY, Chen CM (1993) J Mater Eng Perform 2:383. doi: https://doi.org/10.1007/BF0264882610.1007/BF02648826 ↗
11. Chiou JM, Chung DDL (1993) J Mater Sci 28:1447. doi: https://doi.org/10.1007/BF0036333610.1007/BF00363336 ↗
12. Landry K, Kalogeropoulou S, Eustathopoulos N (1998) Mater Sci Eng A 254:99. doi: https://doi.org/10.1016/S0921-5093(98)00759-X10.1016/S0921-5093(98)00759-X ↗
13. Steffens HD, Reznik B, Kruzhanov V (1997) J Mater Sci 32:5413. doi: https://doi.org/10.1023/A:101868743251210.1023/A:1018687432512 ↗
14. Lancin M, Marhic C (2000) J Eur Ceram Soc 20:1493. doi: https://doi.org/10.1016/S0955-2219(00)00021-210.1016/S0955-2219(00)00021-2 ↗
15. Wang YC, Zhou BL (1996) Composites A 27:1139. doi: https://doi.org/10.1016/1359-835X(96)00072-310.1016/1359-835X(96)00072-3 ↗
16. Wang JW, Hong T, Li GY, Li PX (1997) Composites A 28:943. doi: https://doi.org/10.1016/S1359-835X(97)00068-710.1016/S1359-835X(97)00068-7 ↗
17. Hackl G, Gerhard H, Popovska N (2006) Thin Solid Films 513:217. doi: https://doi.org/10.1016/j.tsf.2006.02.00110.1016/j.tsf.2006.02.001 ↗
18. Kusakabe K, Sea BK, Hayashi JI, Maeda H, Morooka S (1996) Carbon 34:179. doi: https://doi.org/10.1016/0008-6223(96)00166-210.1016/0008-6223(96)00166-2 ↗
19. Choy KL (2003) Prog Mater Sci 48:57. doi: https://doi.org/10.1016/S0079-6425(01)00009-310.1016/S0079-6425(01)00009-3 ↗
20. Kowbel W, Withers JC (1995) Carbon 33:415. doi: https://doi.org/10.1016/0008-6223(94)00166-W10.1016/0008-6223(94)00166-W ↗
21. Lee YJ (2004) Diam Relat Mater 13:383. doi: https://doi.org/10.1016/j.diamond.2003.11.06210.1016/j.diamond.2003.11.062 ↗
22. Yang WY, Miao HZ, Xie ZP (2004) Chem Phys Lett 383:441. doi: https://doi.org/10.1016/j.cplett.2003.11.03110.1016/j.cplett.2003.11.031 ↗
23. Wu YJ, Wu JS, Qin W (2004) Mater Lett 58:2295. doi: https://doi.org/10.1016/S0167-577X(04)00123-510.1016/j.matlet.2004.03.002 ↗
24. Gao YH, Bando Y, Kurasima K, Sato T (2002) J Mater Sci 37:2023. doi: https://doi.org/10.1023/A:101520741690310.1023/A:1015207416903 ↗
25. Tang CC, Fan SS, Dang HY, Zhao JH (2000) J Cryst Growth 210:595. doi: https://doi.org/10.1016/S0022-0248(99)00737-X10.1016/S0022-0248(99)00737-X ↗
26. Vogli E, Mukerji J, Hoffman C, Kladny R (2001) J Am Ceram Soc 84(6):123610.1111/j.1151-2916.2001.tb00822.x ↗
27. Demir A, Altinkok N (2004) Compos Sci Technol 64:2067. doi: https://doi.org/10.1016/j.compscitech.2004.02.01510.1016/j.compscitech.2004.02.015 ↗
28. Diwanji AP, Hall IW (1992) J Mater Sci 27:2093. doi: https://doi.org/10.1007/BF0111792210.1007/BF01117922 ↗