Preparation and characterisation of soft magnetic composites based on Fe fibres
Source abstract
Abstract
This paper presents the preparation and characterisation of a new type of soft magnetic composites that are prepared from long Fe fibres instead of ferromagnetic particles. The Fe fibres were coated with a polymeric layer and compacted in toroidal shapes. The influence of polymer content and compaction pressure on the AC and DC magnetic properties of the compacts was investigated. The AC magnetic properties of the compacts were determined in the frequency range from 50 to 10 kHz at the flux densities of 0.1 T. It was found that 1 wt% of polymer ensures proper insulation of the fibres, hindering the development of eddy currents. Also, in order to have good magnetic properties, the compaction pressure should not be lower than 600 MPa. The comparison between the fibre-based soft magnetic composite and powder-based soft magnetic composite evidenced the superior magnetic properties of this new class of composites. For example, in the frequency range of 50 Hz–10 kHz, the initial relative permeability of the fibre-based compact is two times larger than the initial relative permeability of the powder-based compacts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Magnetic Properties and Applications · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Périgo EA, Weidenfeller B, Kollár P, Füzer J (2018) Past, present, and future of soft magnetic composites. Appl Phys Rev 5:03130110.1063/1.5027045 ↗
2. Sunday KJ, Taheri M (2017) Soft magnetic composites: recent advancements in the technology. Met Powder Rep 72:425–42910.1016/j.mprp.2016.08.003 ↗
3. Shokrollahi H, Janghorban K (2007) Soft magnetic composite materials (SMCs). J Mater Process Technol 189:1–1210.1016/j.jmatprotec.2007.02.034 ↗
4. Strečková M, Medvecký L, Füzer J et al (2010) Design of novel soft magnetic composites based on Fe/resin modified with silica. J Magn Magn Mater 322:1548–155110.1016/j.jmmm.2009.06.006 ↗
5. Strečková M, Füzer J, Medvecký L et al (2014) Characterization of composite materials based on Fe powder (core) and phenoleformaldehyde resin (shell) modified with nanometer-sized SiO2. Bull Mater Sci 37:167–17710.1007/s12034-014-0644-7 ↗
6. Xu W, Wu C, Yan M (2015) Preparation of Fe–Si–Ni soft magnetic composites with excellent high-frequency properties. J Magn Magn Mater 381:116–11910.1016/j.jmmm.2014.12.073 ↗
7. Neamtu BV, Geoffroy O, Chicinaş I, Isnard V (2012) AC magnetic properties of the soft magnetic composites based on Supermalloy nanocrystalline powder prepared by mechanical alloying. Mater Sci Eng B 177:661–66510.1016/j.mseb.2012.03.029 ↗
8. Neamţu BV, Nasui M, Marinca TF et al (2017) Soft magnetic composites based on hybrid coated Fe-Si nanocrystalline powders. Surf Coat Technol 330:219–22710.1016/j.surfcoat.2017.09.088 ↗
9. Zheng YY, Wang YG, Xia GT (2015) Amorphous soft magnetic composite-cores with various orientations of the powder-flakes. J Magn Magn Mater 396:97–10110.1016/j.jmmm.2015.08.036 ↗
10. Peng X, Zhang A, Li J et al (2019) Design and fabrication of Fe–Si–Al soft magnetic composites by controlling orientation of particles in a magnetic field: anisotropy of structures, electrical and magnetic properties. J Mater Sci 54:8719–8726. https://doi.org/10.1007/s10853-019-03470-310.1007/s10853-019-03470-3 ↗
11. Wang J, Fan X, Wu Z, Li G (2017) Regulation and control of insulated layers for intergranular insulated Fe/SiO2 soft magnetic composites. J Mater Sci 52:7091–7099. https://doi.org/10.1007/s10853-017-0941-910.1007/s10853-017-0941-9 ↗
12. Shokrollahi H, Janghorban K (2006) The effect of compaction parameters and particle size on magnetic properties of iron-based alloys used in soft magnetic composites. Mater Sci Eng B 134:41–4310.1016/j.mseb.2006.07.015 ↗
13. Sunday KJ, Taheri KL (2017) NiZnCu-ferrite coated iron powder for soft magnetic composite applications. J Magn Magn Mater 423:164–17010.1016/j.jmmm.2016.09.024 ↗
14. Zhao Z, Sun Y, Wang M et al (2016) Interfacial behavior of Fe76Si9B10P5/Zn0.5Ni0.5Fe2O4 amorphous soft magnetic composite during spark plasma sintering process. Prog Nat Sci Mater 26:85–8910.1016/j.pnsc.2016.01.015 ↗
15. Wang M, Zan Z, Deng N et al (2014) Preparation of pure iron/Ni–Zn ferrite high strength soft magnetic composite by spark plasma sintering. J Magn Magn Mater 361:166–16910.1016/j.jmmm.2014.02.055 ↗
16. Marinca TF, Neamtu BV, Popa F et al (2013) Synthesis and characterization of the NiFe2O4/Ni3Fe nanocomposite powder and compacts obtained by mechanical milling and spark plasma sintering. Appl Surf Sci 285:2–910.1016/j.apsusc.2013.07.145 ↗
17. Hultman L, Andersson O (2010) SMC developments boost performance and strength. Met Powder Rep 65:28–3010.1016/S0026-0657(10)70129-6 ↗
18. Strečková M, Füzer J, Kobera L (2014) A comprehensive study of soft magnetic materials based on FeSi spheres and polymeric resin modified by silica nanorods. Mater Chem Phys 147:649–66010.1016/j.matchemphys.2014.06.004 ↗
19. Lauda M, Füzer J, Kollár P et al (2016) Magnetic properties and loss separation in FeSi/MnZnFe2O4 soft magnetic composites. J Magn Magn Mater 411:12–1710.1016/j.jmmm.2016.03.051 ↗
20. Dias MM, Mozetic HJ, Barboza JS et al (2013) Influence of resin type and content on electrical and magnetic properties of soft magnetic composites (SMCs. Powder Technol 237:213–22010.1016/j.powtec.2013.01.006 ↗
21. Jiles D (1991) Introduction to magnetism and magnetic materials, 1st edn. Springer, Berlin10.1007/978-1-4615-3868-4 ↗
22. Li J, Peng X, Yang Y, Ge H (2017) Preparation and characterization of MnZn/FeSiAl soft magnetic composites. J Magn Magn Mater 426:132–13610.1016/j.jmmm.2016.11.068 ↗
23. Neamţu BV, Marinca TF, Chicinaş I et al (2014) Preparation and soft magnetic properties of spark plasma sintered compacts based on Fe-Si-B glassy powder. J Alloys Compd 600:1–710.1016/j.jallcom.2014.02.115 ↗
24. Neamţu BV, Chicinaş I, Isnard O et al (2013) Magnetic properties of nanocrystalline Ni3Fe compacts prepared by spark plasma sintering. Intermetallics 35:98–10310.1016/j.intermet.2012.12.011 ↗
25. Chen D-X, Brug JA, Goldfarb RB (1991) Demagnetizing factors for cylinders. IEEE Trans Magn 27:3601–361910.1109/20.102932 ↗
26. Anhalt M (2008) Systematic investigation of particle size dependence of magnetic properties in soft magnetic composites. J Magn Magn Mater 320:e366–e36910.1016/j.jmmm.2008.02.072 ↗
27. Kollár P, Birčáková Z, Vojtek V, Füzer J, Bureš R, Fáberová M (2015) Dependence of demagnetizing fields in Fe-based composite materials on magnetic particle size and the resin content. J Magn Magn Mater 388:76–8110.1016/j.jmmm.2015.04.008 ↗