Influence of varnishing on the vibro-mechanical properties of wood used for violins
Source abstract
Abstract
Violins are varnished to protect them against wear, from changes in relative humidity and to enhance the instrument’s appearance. Furthermore, studies have shown that the application of varnish alters the mechanical and vibrational properties of the wood, respectively, the instrument. Commonly, the varnish impact has been studied by means of changes in stiffness, mass and damping properties of wooden test samples, and by changes in the modal parameters (i.e., eigenfrequency, eigenmode and damping) of top and bottom plates or the complete instrument, respectively. Although these properties determine the final sound quality, their changes have been less frequently studied than the chemical composition of the varnishes from historical instruments. This review focuses on the impact of varnishing on the vibro-mechanical properties of wood used for violins from material to complete instrument level, including the varnish properties and their influence on the moisture sorption. Based on a final discussion of the main impacts and results, an outlook specifies new avenues of research required to better understand the influence of varnish on wood used to make violins.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Music Technology and Sound Studies · Musicians’ Health and Performance · Diverse Musicological Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. Bucur V (2016) The varnish. In: Handbook of materials for string musical instruments. Springer, Berlin, pp 373–453. https://doi.org/10.1007/978-3-319-32080-9_910.1007/978-3-319-32080-9_9 ↗
2. Schleske M (1998) On the acoustical properties of violin varnish. Catgut Acoust Soc J 3(6):27–43
3. Glass SV, Zelinka SL (2010) Moisture relations and physical properties of wood. In: Wood handbook: wood as an engineering material. Forest Products Laboratory, United States Department of Agriculture Forest Service, Madison, Wisconsin
4. Goli G, Fioravanti M, Busoni S, Carlson B, Mazzanti P (2012) Measurement and modelling of mass and dimensional variations of historic violins subjected to thermo-hygrometric variations: the case study of the Guarneri “del Gesù” violin (1743) known as the “Cannone”. J Cult Herit 13(3):S154–S16010.1016/j.culher.2012.04.007 ↗
5. Thompson R (1979) The effect of variations in relative humidity on the frequency response of free violin plates. Catgut Acoust Soc Newsl 32:25–27
6. Pérez Martínez MA, Poletti P, Gil Espert L (2011) Vibration testing for the evaluation of the effects of moisture content on the in-plane elastic constants of wood used in musical instruments. In: Vasques CMA, Dias Rodrigues J (eds) Vibration and structural acoustics analysis: current research and related technologies. Springer, Dordrecht, pp 21–57. https://doi.org/10.1007/978-94-007-1703-9_210.1007/978-94-007-1703-9_2 ↗
7. Echard JP, Lavedrine B (2008) Review on the characterisation of ancient stringed musical instruments varnishes and implementation of an analytical strategy. J Cult Herit 9(4):420–429. https://doi.org/10.1016/j.culher.2008.03.00510.1016/j.culher.2008.03.005 ↗
8. Tai BH (2007) Stradivari’s varnish: a review of scientific findings, part I. J Violin Soc Am VSA Pap 21(1):119–144
9. Tai BH (2007) Stradivari’s varnish: a review of scientific findings, part II. J Violin Soc Am VSA Pap 22(1):60–90
10. Dilworth J (1992) The violin and bow–origins and development. Cambridge University Press, Cambridge. https://doi.org/10.1017/ccol9780521390330.00210.1017/ccol9780521390330.002 ↗
11. Hill WH, Hill AF, Hill AE (1909) Antonio Stradivari: his life and work (1644–1737). Macmillan and Company, London
12. Fry G (1904) The varnishes of the Italian Violin-makers of the sixteenth, seventeenth and eighteenth centuries and their influence on tone. Stevens & Sons, San Antonio
13. Brandmair B, Greiner S-P, Blot E (2010) Stradivari varnish: scientific analysis of his finishing technique on selected instruments. Himmer AG, Augsburg, p 363
14. Cattani G, Dunbar RLM, Shapira Z (2013) Value creation and knowledge loss: the case of cremonese stringed instruments. Organ Sci 24(3):813–830. https://doi.org/10.1287/orsc.1120.076810.1287/orsc.1120.0768 ↗
15. Hsieh A (2004) Cremona revisited: the science of violin making. Eng Sci 67(4):28–35
16. Gunji T, Obataya E, Aoyama K (2012) Vibrational properties of harp soundboard with respect to its multi-layered structure. J Wood Sci 58(4):322–326. https://doi.org/10.1007/s10086-012-1253-y10.1007/s10086-012-1253-y ↗
17. Minato K, Akiyama T, Yasuda R, Yano H (1995) Dependence of vibrational properties of wood on varnishing during its drying process in violin manufacturing. Holzforsch 49(3):222–226. https://doi.org/10.1515/hfsg.1995.49.3.22210.1515/hfsg.1995.49.3.222 ↗
18. Haines D (1980) On musical instrument wood Part II. Catgut Acoust Soc Newsl 33:19–23
19. Meinel H (1937) Über Frequenzkurven von Geigen. Akust Z 2:22–33
20. Möckel O (1977) Die Kunst des Geigenbaues, 4th edn. Voigt, Hamburg
21. Harris N, Sheldon R, Johnston J (2007) A recreation of the particulate ground varnish layer used on many violins made before 1750. J Violin Soc Am VSA Pap 21(1):13
22. Woodhouse J (2014) The acoustics of the violin: a review. Rep Prog Phys 77(11):115901. https://doi.org/10.1088/0034-4885/77/11/11590110.1088/0034-4885/77/11/115901 ↗
23. Roussel A (1973) Grundlagen der Geige und des Geigenbaues: ein Lehr-und Handbuch von Bau und Funktion der Streichinstrumente und ihrer Teile, vol 13. Das Musikinstrument
24. Nagyvary J (1988) The chemistry of a stradivarius. Chem Eng News 66(21):24–31. https://doi.org/10.1021/cen-v066n021.p02410.1021/cen-v066n021.p024 ↗
25. Holz D (1995) Materialuntersuchungen zum langjährigen akustischen Einfluß einer Lackierung. Musikinstrum 6–7:98–105
26. Schelleng JC (1968) Acoustical effects of violin varnish. J Acoust Soc Am 44(5):1175–1183. https://doi.org/10.1121/1.191124310.1121/1.1911243 ↗
27. Barlow CY, Woodhouse J (1988) Microscopy of wood finishes. Catgut Acoust Soc J 1(1):9–15
28. Chiesa C, Hargrave RG, Pollens S (1998) Giuseppe Guarneri del Gesù. Peter Biddulph
29. VERNIX: a databse of varnish recipes found in an ancient textual sources (2018)
30. Padding K (2005) A rational look at the classical Italian coatings. J Violin Soc Am VSA Pap 1(1):11–25
31. Barlow CY, Woodhouse J (1989) Of old wood and varnish: peering into the can of worms. Catgut Acoust Soc J 1(4):2–9
32. Barlow C, Woodhouse J (1989) Firm ground, a detailed analysis of ground layers under the microscope. Strad 100:195–197
33. Baese G (1985) Classic Italian violin varnish: its history, materials, preparation and application. Fort Collins, Colorado
34. Hammerl J, Hammerl R (1991) Violin varnishes: interesting information on resins and basic materials for violin varnish and advice on varnishing. J. & R, Hammerl
35. Barlow C, Woodhouse J (1990) The influence of varnish on the properties of spruce plates. Proc Inst Acoust 2:765–770
36. Sedighi Gilani M, Pflaum J, Hartmann S, Kaufmann R, Baumgartner M, Schwarze FWMR (2016) Relationship of vibro-mechanical properties and microstructure of wood and varnish interface in string instruments. Appl Phys A Mater 122(4):1–11. https://doi.org/10.1007/s00339-016-9670-110.1007/s00339-016-9670-1 ↗
37. Setragno F, Zanoni M, Antonacci F, Sarti A, Malagodi M, Rovetta T, Invernizzi C (2017) Feature-based analysis of the impact of ground coat and varnish on violin tone qualities. Acta Acust United Acust 103(1):80–9310.3813/AAA.919035 ↗
38. Echard JP, Bertrand L, von Bohlen A, Le Ho AS, Paris C, Bellot-Gurlet L, Soulier B, Lattuati-Derieux A, Thao S, Robinet L, Lavedrine B, Vaiedelich S (2010) The nature of the extraordinary finish of Stradivari’s instruments. Angew Chem Int Ed Engl 49(1):197–201. https://doi.org/10.1002/anie.20090513110.1002/anie.200905131 ↗
39. Fiocco G, Rovetta T, Gulmini M, Piccirillo A, Licchelli M, Malagodi M (2017) Spectroscopic analysis to characterize finishing treatments of ancient bowed string instruments. Appl Spectrosc 71(11):2477–2487. https://doi.org/10.1177/000370281771562210.1177/0003702817715622 ↗
40. Barlow CY, Edwards PP, Millward GR, Raphael R, Rubio DJ (1988) Wood treatment used in Cremonese instruments. Nature 332(6162):313. https://doi.org/10.1038/332313a010.1038/332313a0 ↗
41. Nagyvary J (1993) Entzifferung des Stradivari-Tones und allgemeine Geigenforschung in Texas. Musikinstrum 42(6–7):107–111
42. von Bohlen A, Röhrs S, Salomon J (2007) Spatially resolved element analysis of historical violin varnishes by use of μPIXE. Anal Bioanal Chem 387(3):781–79010.1007/s00216-006-0777-7 ↗
43. Latour G, Echard J-P, Soulier B, Emond I, Vaiedelich S, Elias M (2009) Structural and optical properties of wood and wood finishes studied using optical coherence tomography: application to an 18th century Italian violin. Appl Opt 48(33):6485–6491. https://doi.org/10.1364/Ao.48.00648510.1364/Ao.48.006485 ↗
44. Pollens S (2009) Recipe for success. Strad 120(1429):34–38
45. Pollens S (2010) Stradivari. Cambridge University Press, Cambridge
46. Echard JP, Bertrand L, von Bohlen A, Le Ho AS, Paris C, Bellot-Gurlet L, Soulier B, Lattuati-Derieux A, Thao S, Robinet L, Lavedrine B, Vaiedelich S (2010) The nature of the extraordinary finish of Stradivari’s instruments. Angew Chem Int Ed 49(1):197–201. https://doi.org/10.1002/anie.20090513110.1002/anie.200905131 ↗
47. Bertrand L, Robinet L, Cohen SX, Sandt C, Le Ho AS, Soulier B, Lattuati-Derieux A, Echard JP (2011) Identification of the finishing technique of an early eighteenth century musical instrument using FTIR spectromicroscopy. Anal Bioanal Chem 399(9):3025–3032. https://doi.org/10.1007/s00216-010-4288-110.1007/s00216-010-4288-1 ↗
48. Sodini N, Dreossi D, Chen R, Fioravanti M, Giordano A, Herrestal P, Rigon L, Zanini F (2012) Non-invasive microstructural analysis of bowed stringed instruments with synchrotron radiation X-ray microtomography. J Cult Herit 13(3):S44–S49. https://doi.org/10.1016/j.culher.2012.04.00810.1016/j.culher.2012.04.008 ↗
49. Fichera GV, Rovetta T, Fiocco G, Alberti G, Invernizzi C, Licchelli M, Malagodi M (2018) Elemental analysis as statistical preliminary study of historical musical instruments. Microchem J 137:309–317. https://doi.org/10.1016/j.microc.2017.11.00410.1016/j.microc.2017.11.004 ↗
50. Fiocco G, Rovetta T, Gulmini M, Piccirillo A, Canevari C, Licchelli M, Malagodi M (2018) Approaches for detecting madder lake in multi-layered coating systems of historical bowed string instruments. Coatings 8(5):17110.3390/coatings8050171 ↗
51. Meyers MA, Chawla KK (2008) Mechanical behavior of materials, 2nd edn. Cambridge University Press, Cambridge. https://doi.org/10.1017/cbo978051181094710.1017/cbo9780511810947 ↗
52. Carfagni M, Lenzi E, Pierini M (1998) The loss factor as a measure of mechanical damping. In: Proceedings-SPIE the international society for optical engineering. SPIE International Society For Optical, pp 580–284
53. Bert CW (1973) Material damping: an introductory review of mathematic measures and experimental technique. J Sound Vib 29(2):129–15310.1016/S0022-460X(73)80131-2 ↗
54. Obataya E, Ohno Y, Norimoto M, Tomita B (2001) Effects of oriental lacquer (urushi) coating on the vibrational properties of wood used for the soundboards of musical instruments. Acoust Sci Technol 22(1):27–3410.1250/ast.22.27 ↗
55. Simonnet C, Gibiat V, Halary J-L (2002) Physical and chemical properties of varnishes and their vibrational consequences. PACS Ref 43:75
56. Obataya E, Furuta Y, Ohno Y, Norimoto M, Tomita B (2002) Effects of aging and moisture on the dynamic viscoelastic properties of oriental lacquer (urushi) film. J Appl Polym Sci 83(11):2288–2294. https://doi.org/10.1002/app.232110.1002/app.2321 ↗
57. Ono T (1993) Effects of varnishing on acoustical characteristics of wood used for musical instrument soundboards. J Acoust Soc Jpn (E) 14(6):397–40710.1250/ast.14.397 ↗
58. Bucur V (2016) Preservative conservation of musical instruments. In: Handbook of materials for string musical instruments. Springer, Cham, pp 737–791. https://doi.org/10.1007/978-3-319-32080-9_1610.1007/978-3-319-32080-9_16 ↗
59. Bucur V (2006) Acoustics of wood, 2nd edn. Springer, Berlin10.1007/3-540-30594-7 ↗
60. Haines DW (1979) On musical instrument wood. Catgut Acoust Soc Newsl 31:23–32
61. Hearmon RFS (1958) The influence of shear and rotatory inertia on the free flexural vibration of wooden beams. Br J Appl Phys 9(10):381–388. https://doi.org/10.1088/0508-3443/9/10/30110.1088/0508-3443/9/10/301 ↗
62. Hutchins M (1991) Effects on spruce test strips of four-year application on four different sealers plus oil varnish. Catgut Acoust Soc J 1(7):11–12
63. Roohnia M, Ghaznavi M, Rostamisan A, Jahanlatib A, Yaghmaeipo A (2013) Traditional varnishes and acoustical properties of wooden soundboards. Sci Int 1(12):401–407. https://doi.org/10.17311/sciintl.2013.401.40710.17311/sciintl.2013.401.407 ↗
64. Brémaud I, Karami E, Bardet S, Gilles N, Perego F, Zare S, Gril J (2016) Changes in vibrational properties of coated wood through time from application of varnish, with recipes used in European or Iranian string instruments making. In: Wooden musical instrument conservation and knowledge conference, WoodMusICK
65. Karami E (2016) Effets de traitements thermiques modérés et de revêtement sur les propriétés vibratoires des bois d’Epicéa et de Mûrier. Université Montpellier
66. Woo Yang Chung SHP (2000) Studies on the vibrational modal analysis of solid woods for making the violin—part 2. The effects of coating materials on the resonant frequency of European spruce and maple. Korea Furnit Soc 11(1):45–52
67. Kluck D (2000) Akustischer Einfluss losemittelarmer, wachshaltiger oder öliger Beschichtungssysteme auf Resonanzholz. Fortschr Akust 26:230–231
68. Meinel H (1957) Regarding the sound quality of violins and a scientific basis for violin construction. J Acoust Soc Am 29(7):817–822. https://doi.org/10.1121/1.190906410.1121/1.1909064 ↗
69. Slaby WE (1997) A test of seven possible fillers as moisture barriers and plate stiffeners. MVA Newsl No. 29 Oct 6–11
70. Bongova M, Urgela S (1999) A study of surface coating influence on elastic properties of spruce wood by means of holographic vibration mode visualization. In: 11th Slovak–Czech–Polish optical conference on wave and quantum aspects of contemporary optics, pp 103–110. https://doi.org/10.1117/12.35304710.1117/12.353047 ↗
71. Eichelberger K (2006) Ermittlung von Kriterien zur Beurteilung der Lackqualität im Musikinstrumentenbau und Untersuchung von neuen Lackrezepturen. Inst. f. Musikinstrumentenbau, Techn. Univ. Dresden, Zwota. https://doi.org/10.2314/gbv:51206969710.2314/gbv:512069697 ↗
72. Stephens H (2015) The effect of finishes on the vibration properties of spruce guitar soundboard wood. Savart J 1(5):1–18. https://www.savartjournal.org/index.php/sj/article/view/25
73. Haines DW (2000) The essential mechanical properties of wood prepared for musical instruments. Catgut Acoust Soc J 4(2):20–32
74. Beare C (1992) Violin expertise: how can we be sure who made what? J Violin Soc Am 12(2):45–66
75. Condax L (1968) Examination of the ground layer of the Italian violin varnish. Catgut Acoust Soc Newsl 10:12–13
76. Schleske M (2002) Empirical tools in contemporary violin making: Part I. Analysis of design, materials, varnish, and normal modes. Catgut Acoust Soc J 4(5):50–64
77. Jansson EV (2002) Acoustics for violin and guitar makers. Kungl. Tekniska högskolan, Department of Speech. Music and Hearing
78. Hutchins C (1987) Effects of five years of filler and varnish seasonings on the eigenmodes in four pairs of viola plates. Catgut Acoust Soc J 48:25–26
79. Skrodzka EB, Linde BB, Krupa A (2013) Modal parameters of two violins with different varnish layers and subjective evaluation of their sound quality. Arch Acoust 38(1):75–81. https://doi.org/10.2478/aoa-2013-000910.2478/aoa-2013-0009 ↗
80. Trapasso L (2014) Feature-based analysis of the violin tone quality. Master thesis, Politecnico di Milano
81. Yano H, Minato K (1992) Improvement of the acoustic and hygroscopic properties of wood by a chemical treatment and application to the violin parts. J Acoust Soc Am 92(3):1222–1227. https://doi.org/10.1121/1.40397210.1121/1.403972 ↗
82. Tatemichi A (1960) Internal friction of multilayer plates. Oyo Buturi 29:802–803
83. Jones RM (2014) Mechanics of composite materials. CRC Press, Boca Raton
84. McLennan J (2000) On varnish. J Aust Assoc Musical Instrum Mak XIX 1:16–27
85. Hagenmaier RD, Shaw PE (1991) Permeability of shellac coatings to gases and water vapor. J Agric Food Chem 39(5):825–82910.1021/jf00005a001 ↗
86. Reichel S (2015) Modellierung und Simulation hygro-mechanisch beanspruchter Strukturen aus Holz im Kurz-und Langzeitbereich. Inst. für Statik und Dynamik der Tragwerke, Dresden
87. Dionisi Vici P, Mazzanti P, Uzielli L (2006) Mechanical response of wooden boards subjected to humidity step variations: climatic chamber measurements and fitted mathematical models. J Cult Herit 7(1):37–48. https://doi.org/10.1016/j.culher.2005.10.00510.1016/j.culher.2005.10.005 ↗
88. Brandao A, Perré P (1996) The” Flying Wood”—a quick test to characterise the drying behaviour of tropical woods. In: 5th international IUFRO wood drying conference, Québec, pp 315–324
89. Viala R, Placet V, Cogan S, Foltête E (2016) Model-based effects screening of stringed instruments. In: Model validation and uncertainty quantification, vol 3. Springer, Berlin, pp 151–157. https://doi.org/10.1007/978-3-319-29754-5_1410.1007/978-3-319-29754-5_14 ↗
90. Brémaud I, Gril J (2015) Effect of transitional moisture change on the vibrational properties of violin-making wood. In: Cost FP1302 WoodMusICK annual conference
91. Sasaki T, Norimoto M, Yamada T, Rowell R (1988) Effect of moisture on the acoustical properties of wood. Mokuzai Gak 34(10):794–803
92. Hunt D, Gril J (1996) Evidence of a physical ageing phenomenon in wood. J Mater Sci Lett 15(1):80–8210.1007/BF01855620 ↗