Template-sacrificed synthesis of polypyrrole nanofibers for lithium battery
Source abstract
Abstract
Polypyrrole (PPy) nanofibers have been prepared for the first time using Fe2O3 hollow nanofibers as a sacrificial template, and characterized by scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectrum, and Raman spectroscopy. The results show that pyrrole was uniformly polymerized around the Fe2O3 and the Fe2O3 was subsequently removed thoroughly with HCl. The electrochemical properties of the PPy nanofibers for lithium battery were investigated with cyclic voltammetry, galvanostatic charge–discharge test, and rate performance. The as-prepared PPy nanofibers composed by nanoparticles exhibited with good rate performance, which delivered a high discharge capacity of 98 mA h g−1 after 50 cycles between 2.0 and 3.8 V at 30 mA g−1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Milczarek G, Inganäs O (2012) Renewable cathode materials from biopolymer/conjugated polymer. Science 335:1468–147110.1126/science.1215159 ↗
2. Novák P, Müller K, Santhanam KSV, Haas O (1997) Electrochemically active polymers for rechargeable batteries. Chem Rev 97:207–28110.1021/cr941181o ↗
3. Huang YH, Park KS, Goodenough JB (2006) Improving lithium batteries by tethering carbon-coated LiFePO4 to polypyrrole. J Electrochem Soc 153:2282–228610.1149/1.2360769 ↗
4. Fedorkova A, Nacher-Alejos A, Gomez-Romero P, Oriňakova R, Kaniansky D (2010) Structural and electrochemical studies of PPy/PEG-LiFePO4 cathode material for Li-ion batteries. Electrochim Acta 55:943–94710.1016/j.electacta.2009.09.060 ↗
5. Qie L, Yuan LX, Zhang WX, Chen WM, Huang YH (2012) Revisit of polypyrrole as cathode material for lithium-ion battery. J Electrochem Soc 159:1624–162910.1149/2.042210jes ↗
6. Sultana I, Rahman MM, Li S, Wang JZ, Wang CY, Wallace GG, Liu HK (2012) Electrodeposited polypyrrole (PPy)/para (toluene sulfonic acid) (pTS) free-standing film for lithium secondary battery application. Electrochim Acta 60:201–20510.1016/j.electacta.2011.11.037 ↗
7. Yin ZG, Ding YH, Zheng QD, Guan LH (2012) CuO/polypyrrole core-shell nanocomposites as anode materials for lithiumion batteries. Electrochem Commun 20:40–4310.1016/j.elecom.2012.04.005 ↗
8. Wang G, Yang L, Chen Y, Wang J, Bewlay S, Liu H (2005) An investigation of polypyrrole-LiFePO4 composite cathode materials for lithium-ion batteries. Electrochim Acta 50:4649–465410.1016/j.electacta.2005.02.026 ↗
9. Huang YH, Goodenough JB (2008) High-Rate LiFePO4 lithium rechargeable battery promoted by electrochemically active polymers. Chem Mater 20:7237–724110.1021/cm8012304 ↗
10. Boyano I, Blazquez JA, Meatza ID, Bengoechea M, Miguel O, Grande H, Huang Y, Goodenough JB (2010) Preparation of C-LiFePO4/polypyrrole lithium rechargeable cathode by consecutive potential steps electrodeposition. J Power Sources 195:5351–535910.1016/j.jpowsour.2010.03.029 ↗
11. Noerochim L, Wang JZ, Wexler D, Rahman MM, Chen J, Liu HK (2012) Impact of mechanical bending on the electrochemical performance of bendable lithium batteries with paper-like free-standing V2O5-polypyrrole cathodes. J Mater Chem 22:11159–1116510.1039/c2jm16470a ↗
12. Ren XZ, Shi C, Zhang PX, Jiang YK, Liu JH, Zhang QL (2012) An investigation of V2O5/polypyrrole composite cathode materials for lithium-ion batteries synthesized by sol-gel. Mater Sci Eng, B 177:929–93410.1016/j.mseb.2012.04.013 ↗
13. Dziewoński PM, Grzeszczuk M (2010) Towards TiO2-conducting polymer hybrid materials for lithium ion batteries. Electrochim Acta 55:3336–334710.1016/j.electacta.2010.01.043 ↗
14. Lai C, Li G, Dou Y, Gao X (2010) Mesoporous polyaniline or polypyrrole/anatase TiO2 nanocomposite as anode materials for lithium-ion batteries. Electrochim Acta 55:4567–457210.1016/j.electacta.2010.03.010 ↗
15. Yuan L, Wang J, Chew S, Chen J, Guo Z, Zhao L, Konstantinov K, Liu H (2007) Synthesis and characterization of SnO2-polypyrrole composite for lithium-ion battery. J Power Sources 174:1183–118710.1016/j.jpowsour.2007.06.179 ↗
16. Cui L, Shen J, Cheng F, Tao Z, Chen J (2011) SnO2 nanoparticles@polypyrrole nanowires composite as anode materials for rechargeable lithium-ion batteries. J Power Sources 196:2195–220110.1016/j.jpowsour.2010.09.075 ↗
17. Guo B, Kong Q, Zhu Y, Mao Y, Wang Z, Wan M, Chen L (2011) Electrochemically fabricated polypyrrole-cobalt-oxygen coordination complex as high-performance lithium-storage materials. Chem Eur J 17:14878–1488410.1002/chem.201002379 ↗
18. Yin Z, Fan W, Ding Y, Li J, Guan L, Zheng Q (2015) Shell structure control of PPy-modified CuO composite nanoleaves for lithium batteries with improved cyclic performance. ACS Sust Chem Eng 3:507–51710.1021/sc500755d ↗
19. Yin Z, Ding Y, Zheng Q, Guan L (2012) CuO/polypyrrole core-shell nanocomposites as materials for lithium-ion batteries. Electrochem Commun 20:40–4310.1016/j.elecom.2012.04.005 ↗
20. Kuwabata S, Masui S, Yoneyama H (1999) Charge–discharge properties of composites of LiMn2O4 and polypyrrole as positive electrode materials for 4 V class of rechargeable Li batteries. Electrochim Acta 44:4593–460010.1016/S0013-4686(99)00178-4 ↗
21. Chaudhari S, Srinivasan M (2012) 1D hollow α-Fe2O3 electrospun nanofibers as high performance anode material for lithium ion batteries. J Mater Chem 22:23049–2305610.1039/c2jm32989a ↗
22. Zheng W, Li ZY, Zhang HN, Wang W, Wang Y, Wang C (2009) Electrospinning route for α-Fe2O3 ceramic nanofibers and their gas sensing properties. Mater Res Bull 44:1432–143610.1016/j.materresbull.2008.12.013 ↗
23. Fan HJ, Knez M, Scholz R, Hesse D, Nielsch K, Zacharias M, Golsele U (2007) Influence of surface diffusion on the formation of hollow nanostructures induced by the Kirkendall effect: the basic concept. Nano Lett 7:993–99710.1021/nl070026p ↗
24. Kanwal F, Siddiqi SA, Batool A, Imran M, Mushtaq W, Jamil T (2011) Synthesis of polypyrrole–ferric oxide (PPy-Fe2O3) composites and study of their structural and conducting properties. Synth Met 161:335–33910.1016/j.synthmet.2010.12.001 ↗
25. Basavaraja S, Balaji DS, Bedre MD (2011) Solvothermal synthesis and characterization of acicular α-Fe2O3 nanoparticles. Bull Mater Sci 34:1313–131710.1007/s12034-011-0321-z ↗
26. Qin W, Yang C, Yi R, Gao G (2011) Hydrothermal synthesis and characterization of single-crystalline α-Fe2O3 nanocubes. J Nanomater 2010:1–510.1155/2011/159259 ↗
27. Chougule MA, Pawar SG, Godse PR, Mulik RN, Sen S, Patil VB (2011) Synthesis and characterization of polypyrrole (PPy) thin films. Soft Nanosci Lett 1:6–1010.4236/snl.2011.11002 ↗
28. Cui CJ, Wu GM, Yang H, She S, Shen J, Zhou B, Zhang Z (2010) A new high-performance cathode material for rechargeable lithium-ion batteries: polypyrrole/vanadium oxide nanotubes. Electrochim Acta 55:8870–887510.1016/j.electacta.2010.07.087 ↗
29. Thombare JV, Rath MC, Han SH, Fulari VJ (2013) Synthesis of hydrophilic polypyrrole thin films by Silar method. Mater Phys Mech 16:118–125
30. Zhou C, Zhang YW, Li YY, Liu JP (2013) Construction of high-capacitance 3D CoO@Polypyrrole nanowire array electrode for aqueous asymmetric supercapacitor. Nano Lett 13:2078–208510.1021/nl400378j ↗
31. Ren XZ, Shi C, Zhang PX, Jiang YK, Liu JH, Zhang QL (2012) An investigation of V2O5/polypyrrole composite cathode materials for lithium-ion batteries synthesized by sol-gel. Mater Sci Eng, B 177:929–93410.1016/j.mseb.2012.04.013 ↗
32. Yang C, Liu P, Wang TM (2011) Well-defined core-shell carbon black/polypyrrole nanocomposites for electrochemical energy storage. ACS Appl Mater Interfaces 3:1109–111410.1021/am1012529 ↗
33. Zhang X, Zhi WX, Yan B, Xu XX (2012) α-Fe2O3/PPy/Ag functional hybrid nanomaterials with core/shell structure: Synthesis, characterization and catalytic activity. Powder Technol 221:177–18210.1016/j.powtec.2011.12.064 ↗
34. Wei M, Lu Y (2009) Templating fabrication of polypyrrole nanorods/nanofibers. Synth Met 159:1061–106610.1016/j.synthmet.2009.01.031 ↗
35. Adhyapak PV, Mulik UP, Amalnerkar DP, Mulla IS (2013) Low temperature synthesis of needle-like α-FeOOH and their conversion into α-Fe2O3 nanorods for humidity sensing application. J Am Ceram Soc 9:731–73510.1111/jace.12189 ↗
36. Faria DLAD, Silva SV, Oliveira MTD (1997) Raman microspectroscopy of some iron oxides and oxyhydroxides. J Raman Spectrosc 28:873–87810.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.3.CO;2-2 ↗
37. Nasibulin AG, Rackauskas S, Jiang H, Tian Y, Mudimela PR, Shandakov SD, Nasibulina LI, Sainio J, Kauppinen EI (2009) Simple and rapid synthesis of α-Fe2O3 nanowires under ambient conditions. Nano Res 2:373–37910.1007/s12274-009-9036-5 ↗
38. Eid C, Brioude A, Salles V, Plenet JC, Asmar R, Monteil Y, Khoury R, Khoury A, Miele P (2010) Iron-based 1D nanostructures by electrospinning process. Nanotechnology 21:125–701
39. Cao HQ, Wang GZ, Zhang L, Liang Y, Zhang SC, Zhang XR (2006) Shape and magnetic properties of single-crystalline hematite (α-Fe2O3) nanocrystals. Chem Phys Chem 7:1897–190110.1002/cphc.200600130 ↗
40. Bersani D, Lotticl PP (2000) A micro-Raman study of iron-titanium oxides obtained by sol-gel sythesis. J Mater Sci 35:4301–4305. doi: 10.1023/A:100488430275510.1023/A:1004884302755 ↗
41. Han GY, Shi GQ (2006) Electrochemical actuator based on single-layer polypyrrole film. Sens Actuat B—Chem 113:259–26410.1016/j.snb.2005.02.055 ↗
42. Duchet J, Legras R, Champagne SD (1998) Chemical synthesis of polypyrrole: structure-properties relationship. Synth Met 98:113–12210.1016/S0379-6779(98)00180-5 ↗
43. Li M, Wei Z, Jiang LJ (2008) Polypyrrole nanofiber arrays synthesized by a biphasic electrochemical strategy. Mater Chem 18:2276–228010.1039/b800289d ↗
44. Ye SJ, Fang L, Qing XT, Lu Y (2010) Surface-enhanced Raman scattering study of Ag@PPy nanoparticles. J Raman Spectrosc 41:1119–112310.1002/jrs.2577 ↗