Intentional and unintentional elemental segregation to grain boundaries in a Ni-rich nanocrystalline alloy
Source abstract
Abstract
Grain boundary segregation is an important phenomenon for nanocrystalline materials as it influences thermal stability and mechanical properties. While several studies have considered effects of single, intentional segregants, co-segregation of intentional and unintentional segregants to general grain boundaries is not commonly investigated using experimental techniques on the atomic scale. This study utilized aberration-corrected scanning transmission electron microscopy and atom probe tomography to evaluate the grain boundary structure and chemistry of an electroplated and annealed electrodeposited Ni–W alloy. Several phases were observed in the annealed microstructure including elongated nanoscale oxide particles and relatively large impurity carbide phases. Furthermore, grain boundaries regularly exhibited ordered structures, minimal elemental tungsten segregation (intended solute) and impurity carbon segregation (unintentional solute), but moderately high-impurity oxygen segregation (unintentional solute). The unintentional segregated impurities (oxygen and carbon) resulted in a total average grain boundary composition of ~ 10 at.%. The consequence of impurity segregation is discussed in terms of thermal stability and potential mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced Materials Characterization Techniques · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Gleiter H (1990) Nanocrystalline materials. Prog Mater Sci 33:223–31510.1016/0079-6425(89)90001-7 ↗
2. Koch CC, Scattergood RO, Saber M, Kotan H (2013) High temperature stabilization of nanocrystalline grain size: thermodynamic versus kinetic strategies. J Mater Res 28:1785–1791. https://doi.org/10.1557/jmr.2012.42910.1557/jmr.2012.429 ↗
3. Weissmuller J (1993) Alloy effects in nanostructures. Nanostructured Mater 3:261–27210.1016/0965-9773(93)90088-S ↗
4. Weissmuller J (1994) Alloy thermodynamics in nanostructures. J Mater Res 9:4–710.1557/JMR.1994.0004 ↗
5. Krill CE, Ehrhardt H, Birringer R (2005) Thermodynamic stabilization of nanocrystallinity. Z Met 96:1134–114110.3139/146.101152 ↗
6. Atwater MA, Darling KA (2012) A visual library of stability in binary metallic systems: the stabilization of nanocrystalline grain size by solute addition—part 1. No. ARL-TR-6007. Army Research Lab Aberdeen Proving Ground MD Weapons and Materials Research Directorate10.21236/ADA561871 ↗
7. Saber M, Koch C, Scattergood R (2015) Thermodynamic grain size stabilization models: an overview. Mater Res Lett 3:37–41. https://doi.org/10.1080/21663831.2014.99789410.1080/21663831.2014.997894 ↗
8. Darling KA, VanLeeuwen BK, Koch CC, Scattergood RO (2010) Thermal stability of nanocrystalline Fe–Zr alloys. Mater Sci Eng, A 527:3572–3580. https://doi.org/10.1016/j.msea.2010.02.04310.1016/j.msea.2010.02.043 ↗
9. Darling KA, Chan RN, Wong PZ et al (2008) Grain-size stabilization in nanocrystalline FeZr alloys. Scr Mater 59:530–533. https://doi.org/10.1016/j.scriptamat.2008.04.04510.1016/j.scriptamat.2008.04.045 ↗
10. Isomäki I, Hämäläinen M, Braga MH, Gasik M (2017) First principles, thermal stability and thermodynamic assessment of the binary Ni–W system. Int J Mater Res 146:1025–1035. https://doi.org/10.3139/146.11155710.3139/146.111557 ↗
11. Chookajorn T, Murdoch HA, Schuh CA (2012) Design of stable nanocrystalline alloys. Science 337:951–954. https://doi.org/10.1126/science.122473710.1126/science.1224737 ↗
12. Chookajorn T, Schuh CA (2014) Nanoscale segregation behavior and high-temperature stability of nanocrystalline W-20 at.% Ti. Acta Mater 73:128–138. https://doi.org/10.1016/j.actamat.2014.03.03910.1016/j.actamat.2014.03.039 ↗
13. Kaub T, Thompson GB (2017) Ti segregation in regulating the stress and microstructure evolution in W-Ti nanocrystalline films. J Appl Phys 122:085301. https://doi.org/10.1063/1.499188010.1063/1.4991880 ↗
14. Cai XC, Song J, Yang TT et al (2018) A bulk nanocrystalline Mg–Ti alloy with high thermal stability and strength. Mater Lett 210:121–123. https://doi.org/10.1016/j.matlet.2017.09.02110.1016/j.matlet.2017.09.021 ↗
15. Darnbrough JE, Flewitt PEJ (2014) Growth of abnormal planar faceted grains in nanocrystalline nickel containing impurity sulphur. Acta Mater 79:421–433. https://doi.org/10.1016/j.actamat.2014.05.05910.1016/j.actamat.2014.05.059 ↗
16. Natter H, Hempelmann R (2003) Tailor-made nanomaterials designed by electrochemical methods. Electrochim Acta 49:51–61. https://doi.org/10.1016/j.electacta.2003.04.00410.1016/j.electacta.2003.04.004 ↗
17. Tang F, Gianola DS, Moody MP et al (2012) Observations of grain boundary impurities in nanocrystalline Al and their influence on microstructural stability and mechanical behaviour. Acta Mater 60:1038–1047. https://doi.org/10.1016/j.actamat.2011.10.06110.1016/j.actamat.2011.10.061 ↗
18. Saber M, Kotan H, Koch CC, Scattergood RO (2013) A predictive model for thermodynamic stability of grain size in nanocrystalline ternary alloys. J Appl Phys 114:103510. https://doi.org/10.1063/1.482104010.1063/1.4821040 ↗
19. Xing W, Kalidindi AR, Schuh CA (2017) Preferred nanocrystalline configurations in ternary and multicomponent alloys. Scr Mater 127:136–140. https://doi.org/10.1016/j.scriptamat.2016.09.01410.1016/j.scriptamat.2016.09.014 ↗
20. Liang T, Chen Z, Yang X et al (2017) The thermodynamic stability induced by solute co-segregation in nanocrystalline ternary alloys. Int J Mat Res 108:435–44010.3139/146.111496 ↗
21. Huang Z, Chen F, Shen Q, et al (2018) Combined effects of nonmetallic impurities and planned metallic dopants on grain boundary energy and strength. arXiv:1809.02217
22. Kapoor M, Kaub T, Darling KA et al (2017) An atom probe study on Nb solute partitioning and nanocrystalline grain stabilization in mechanically alloyed Cu–Nb. Acta Mater 126:564–575. https://doi.org/10.1016/j.actamat.2016.12.05710.1016/j.actamat.2016.12.057 ↗
23. Choi I, Detor A, Schwaiger R et al (2008) Mechanics of indentation of plastically graded materials—II: experiments on nanocrystalline alloys with grain size gradients. J Mech Phys Solids 56:172–183. https://doi.org/10.1016/j.jmps.2007.07.00610.1016/j.jmps.2007.07.006 ↗
24. Detor A, Schuh C (2007) Microstructural evolution during the heat treatment of nanocrystalline alloys. J Mater Res 22:3233–3248. https://doi.org/10.1557/JMR.2007.040310.1557/JMR.2007.0403 ↗
25. Detor A, Schuh CA (2007) Tailoring and patterning the grain size of nanocrystalline alloys. Acta Mater 55:371–379. https://doi.org/10.1016/j.actamat.2006.08.03210.1016/j.actamat.2006.08.032 ↗
26. Detor AJ, Schuh CA (2007) Grain boundary segregation, chemical ordering and stability of nanocrystalline alloys: atomistic computer simulations in the Ni–W system. Acta Mater 55:4221–4232. https://doi.org/10.1016/j.actamat.2007.03.02410.1016/j.actamat.2007.03.024 ↗
27. Detor A, Miller MK, Schuh CA (2007) Measuring grain-boundary segregation in nanocrystalline alloys: direct validation of statistical techniques using atom probe tomography. Philos Mag Lett 87:581–587. https://doi.org/10.1080/0950083070140012510.1080/09500830701400125 ↗
28. Detor A, Miller M, Schuh C (2006) Solute distribution in nanocrystalline Ni–W alloys examined through atom probe tomography. Philos Mag 86:4459–4475. https://doi.org/10.1080/1478643060072674910.1080/14786430600726749 ↗
29. Cury R, Joubert JM, Tusseau-Nenez S et al (2009) On the existence and the crystal structure of Ni4W, NiW, and NiW2 compounds. Intermetallics 17:174–17810.1016/j.intermet.2008.11.001 ↗
30. Borgia C, Scharowsky T, Furrer A et al (2011) A combinatorial study on the influence of elemental composition and heat treatment on the phase composition, microstructure and mechanical properties of Ni–W alloy thin films. Acta Mater 59:386–399. https://doi.org/10.1016/j.actamat.2010.09.04510.1016/j.actamat.2010.09.045 ↗
31. Marvel CJ, Cantwell PR, Harmer MP (2015) The critical influence of carbon on the thermal stability of nanocrystalline Ni–W alloys. Scr Mater 96:45–48. https://doi.org/10.1016/j.scriptamat.2014.10.02210.1016/j.scriptamat.2014.10.022 ↗
32. Marvel CJ, Yin D, Cantwell PR, Harmer MP (2016) The influence of oxygen contamination on the thermal stability and hardness of nanocrystalline Ni–W alloys. Mater Sci Eng, A 664:49–57. https://doi.org/10.1016/j.msea.2016.03.12910.1016/j.msea.2016.03.129 ↗
33. Juškėnas R, Valsiūnas I, Pakštas V, Giraitis R (2009) On the state of W in electrodeposited Ni–W alloys. Electrochim Acta 54:2616–2620. https://doi.org/10.1016/j.electacta.2008.10.06010.1016/j.electacta.2008.10.060 ↗
34. Yamasaki T, Schlobmacher P, Ehrlich K, Ogino Y (1998) Formation of amorphous electrodeposited Ni–W alloys and their nanocrystallization. Nanostructured Mater 10:375–38810.1016/S0965-9773(98)00078-6 ↗
35. Gammer C, Mangler C, Rentenberger C, Karnthaler HP (2010) Quantitative local profile analysis of nanomaterials by electron diffraction. Scr Mater 63:312–315. https://doi.org/10.1016/j.scriptamat.2010.04.01910.1016/j.scriptamat.2010.04.019 ↗
36. Mishra NS, Ranganathan S (1995) Electron microscopy and diffraction of ordering in Ni4W alloys. Acta Metall Mater 43:2287–2302. https://doi.org/10.1016/0956-7151(94)00417-X10.1016/0956-7151(94)00417-X ↗
37. Mishra NS, Ranganathan S (1992) Electron microscopy and diffraction of ordering in an off-stoichiometric Ni–W alloy. Scr Metall 27:1337–134210.1016/0956-716X(92)90080-X ↗
38. Zhou X, Yu X, Kaub T et al (2016) Grain boundary specific segregation in nanocrystalline Fe(Cr). Sci Rep 6:34642. https://doi.org/10.1038/srep3464210.1038/srep34642 ↗
39. Trelewicz J, Schuh CA (2009) Grain boundary segregation and thermodynamically stable binary nanocrystalline alloys. Phys Rev B 79:094112. https://doi.org/10.1103/PhysRevB.79.09411210.1103/PhysRevB.79.094112 ↗
40. Abdeljawad F, Foiles SM (2015) Stabilization of nanocrystalline alloys via grain boundary segregation: a diffuse interface model. Acta Mater 101:159–171. https://doi.org/10.1016/j.actamat.2015.07.05810.1016/j.actamat.2015.07.058 ↗
41. Abdeljawad F, Lu P, Argibay N et al (2017) Grain boundary segregation in immiscible nanocrystalline alloys. Acta Mater 126:528–539. https://doi.org/10.1016/j.actamat.2016.12.03610.1016/j.actamat.2016.12.036 ↗
42. Li L, Xu W, Saber M et al (2015) Materials Science & Engineering A Long-term stability of 14YT–4Sc alloy at high temperature. Mater Sci Eng, A 647:222–228. https://doi.org/10.1016/j.msea.2015.09.01210.1016/j.msea.2015.09.012 ↗
43. Shahbeigi Roodposhti P, Saber M, Koch C et al (2017) Effect of oxygen content on thermal stability of grain size for nanocrystalline Fe10Cr and Fe14Cr4Hf alloy powders. J Alloys Compd 720:510–520. https://doi.org/10.1016/j.jallcom.2017.05.26110.1016/j.jallcom.2017.05.261 ↗
44. Xu WZ, Li LL, Saber M et al (2014) Nano ZrO 2 particles in nanocrystalline Fe–14Cr–1.5Zr alloy powders. J Nucl Mater 452:434–439. https://doi.org/10.1016/j.jnucmat.2014.05.06710.1016/j.jnucmat.2014.05.067 ↗
45. Yin D, Marvel CJ, Cui FY et al (2018) Microstructure and fracture toughness of electrodeposited Ni-21 at.% W alloy thick films. Acta Mater 143:272–280. https://doi.org/10.1016/j.actamat.2017.10.00110.1016/j.actamat.2017.10.001 ↗
46. Cao W, Marvel CJ, Yin D et al (2016) Correlations between microstructure, fracture morphology, and fracture toughness of nanocrystalline Ni–W alloys. Scr Mater 113:84–88. https://doi.org/10.1016/j.scriptamat.2015.09.03010.1016/j.scriptamat.2015.09.030 ↗
47. Janisch R, Elsässer C (2003) Segregated light elements at grain boundaries in niobium and molybdenum. Phys Rev B - Condens Matter Mater Phys 67:1–11. https://doi.org/10.1103/PhysRevB.67.22410110.1103/PhysRevB.67.224101 ↗
48. Zhang P, Zou T, Zheng Z, Zhao J (2015) Effect of interstitial impurities on grain boundary cohesive strength in vanadium. Comput Mater Sci 110:163–168. https://doi.org/10.1016/j.commatsci.2015.08.02810.1016/j.commatsci.2015.08.028 ↗
49. Huang Z, Chen F, Shen Q et al (2018) Uncovering the influence of common nonmetallic impurities on the stability and strength of a Σ5 (310) grain boundary in Cu. Acta Mater 148:110–122. https://doi.org/10.1016/j.actamat.2018.01.05810.1016/j.actamat.2018.01.058 ↗
50. Aksyonov DA, Hickel T, Lipnitskii AG, Neugebauer J (2016) The impact of carbon and oxygen in alpha-titanium: ab initio study of solution enthalpies and grain boundary segregation. J Phys: Condens Matter 385001:1–23. https://doi.org/10.1088/0953-8984/28/38/38500110.1088/0953-8984/28/38/385001 ↗