Modified single fiber fragmentation test procedure to study water degradation of the fiber/matrix interface toughness of glass/vinylester
Source abstract
Abstract
A modified single fiber fragmentation test (SFFT) procedure, that permits separation of the fiber break and fiber/matrix (F/M) debond propagation events, was employed to characterize the (F/M) interface toughness of dry and water saturated E-glass/vinylester. By focusing solely on the debond propagation event, and by measuring the critical load for debond propagation, fracture mechanic analysis enabled determination of the fracture toughness of the fiber/matrix interface. After immersion in seawater, the interface was substantially degraded. The fracture toughness was reduced by approximately a factor of two.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · High voltage insulation and dielectric phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Ray BC (2006) J Colloid Interface Sci 298:11110.1016/j.jcis.2005.12.023 ↗
2. Rao V, Herrera-Franco PJ, Ozzelo AD, Drzal LT (1991) J Adhesion 34:6510.1080/00218469108026506 ↗
3. Cox HL (1952) Br J Appl Phys 3:7210.1088/0508-3443/3/3/302 ↗
4. Kelly A, Tyson WR (1965) J Mech Phys Solids 13:32910.1016/0022-5096(65)90035-9 ↗
5. Drzal LT, Rich MJ, Camping JD, Park WJ (1980) Proceedings of 35th annual technical conference reinforced plastics/composites institute, Paper 20-C:1. SPI, New Orleans
6. Kim BW, Nairn JA (2002) J Compos Mater 36:182510.1177/0021998302036015243 ↗
7. Ramirez FA, Carlsson LA, Acha BA (2008) J Mater Sci 43:5230. doi: https://doi.org/10.1007/s10853-008-2766-z10.1007/s10853-008-2766-z ↗
8. Cervenka AJ, Young RJ, Kueseng K (2005) Compos Part A 36:102010.1016/j.compositesa.2004.10.034 ↗
9. Kobiki A, Kawada H (2005) JSME Int J Series A: Solid Mech Mater Eng 48:18310.1299/jsmea.48.183 ↗
10. Nairn JA, Liu YC (1996) Compos Interfaces 4:24110.1163/156855497X00028 ↗
11. Nairn JA, Liu YC (1997) Int J Solids Struct 34:125510.1016/S0020-7683(96)00065-0 ↗
12. Nairn JA (2000) Int J Fract 105:24310.1023/A:1007666426275 ↗
13. Liu HY, Mai YW, Ye L, Zhou LM (1997) J Mater Sci 32:633. doi: https://doi.org/10.1023/A:101852751662110.1023/A:1018527516621 ↗
14. Wagner HD, Nairn JA, Detassis M (1995) Appl Compos Mater 2:10710.1007/BF00569253 ↗
15. Ramirez FA, Carlsson LA, Acha BA (2008) Compos Part A (in press)
16. Feih S, Wonsyld K, Minzari D, Westmann P, Liholt H (2004) Testing procedure for the single fiber fragmentation test. Riso National Laboratory, Riso-R-1483(EN), Roskilde, Denmark
17. Daniel IM, Ishai O (2006) Engineering mechanics of composite materials. Oxford University Press, New York
18. Harris B, Morley J, Phillips DC (1975) J Mater Sci 10:2050. doi: https://doi.org/10.1007/BF0055748310.1007/BF00557483 ↗
19. Kim BW, Nairn JA (2002) J Mater Sci 37:3965. doi: https://doi.org/10.1023/A:101968431227210.1023/A:1019684312272 ↗
20. Ramirez FA (2008) Master’s Thesis. Department of Mechanical Engineering Florida Atlantic University, Florida
21. Chua PS, Piggott MR (1985) Compos Sci Technol 22:18510.1016/0266-3538(85)90032-6 ↗
22. Baillie C (1991) PhD Thesis. Department of Materials Science and Engineering University of Surrey, Surrey
23. Whitney JM, Drzal LT (1987) Toughened Compos ASTM STP 937:17910.1520/STP24378S ↗