Microstructure and mechanical properties of SiC-platelet reinforced Al2O3/SiC-particle hybrid composites
Source abstract
Abstract
SiC-platelet reinforced Al2O3/SiC-particle nanocomposites were fabricated by hot-pressing the mixture through the conventional powder mixing process. The mechanical properties of Al2O3/SiC-particle/SiC-platelet hybrid composites were evaluated. Fracture toughness and work of fracture were increased by the incorporation of SiC-platelets into Al2O3/SiC-particle nanocomposites. The typical rising R-curve was shown during crack growth for these hybrid nanocomposites, whereas Al2O3/SiC-particle nanocomposites showed the constant K R value and no rising R-curve. The further improvement of Al2O3/SiC-particle nanocomposites in the creep resistance was observed by the addition of SiC platelets. The relationship between the microstructure and mechanical properties for Al2O3/SiC-particle/SiC-platelet hybrid composites was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. J. R. Porter, F. F. Lange and A. H. Chokski, Am. Ceram. Soc. Bull. 66 (1987) 343.
2. N. Claussen, J. Steeb and R. F. Pabst,ibid. 56 (1977) 559.
3. K. Niihara, A. Nakahira, T. Uchiyama and T. Hirai, in “Fracture Mechanics of Ceramics, Vol. 7,” edited by R. C. Bradt, A. G. Evans, D. P. H. Hasselman and F. F. Lange (Plenum Press, New York, 1986) p. 103.10.1007/978-1-4615-7023-3_8 ↗
4. K. Niihara, J. Ceram. Soc. Jpn. 99 (1991) 974.10.2109/jcersj.99.974 ↗
5. A. Nakahira and K. Niihara, in Fracture Mechanics of Ceramics, Vol. 9, Ed. by M. Sakai, R. C. Bradt, D. P. H. Hasselman and D. Munz (Plenum Press, New York, 1992) p. 165.10.1007/978-1-4615-3350-4_12 ↗
6. T. Hirano and K. Niihara,Nanostruct. Mater. 5 (1995) 808.10.1016/0965-9773(95)00287-O ↗
7. A. Nakahira, PhD thesis, Osaka University, 1992.
8. T. Ohji, T. Hirano, A. Nakahira and K. Niihara, J. Am. Ceram. Soc. 79 (1996) 35.10.1111/j.1151-2916.1996.tb07877.x ↗
9. K. T. Faber and A. G. Evans,Acta Metall. 31 (1983) 565.10.1016/0001-6160(83)90046-9 ↗
10. A. G. Evans Idem., ibid. 31 (1983) 577.10.1016/0001-6160(83)90047-0 ↗
11. S. Inoue, T. Uchiyama and K. Niihara, J. Jpn. Soc. Powder and Powder Metall. 37 (1990) 341.10.2497/jjspm.37.341 ↗
12. K. Matsushita, S. Kuratani, T. Okamoto and M. Shimada, J. Mater. Sci. Lett. 3 (1984) 345.10.1007/BF00729393 ↗
13. K. Niihara, R. Morena and D. P. H. Hasselman, ibid. 1 (1982) 13.10.1007/BF00724706 ↗
14. J. I. Bluhm, Eng. Fract. Mecha. 7 (1975) 593.10.1016/0013-7944(75)90059-4 ↗
15. G. R. Irwin, J. Appl. Mech. 24 (1957) 361.10.1115/1.4011547 ↗
16. J. C. Vanloon and C. M. Parissis, Analyst. 94 (1969) 1057–1062.10.1039/an9699401057 ↗
17. N. Claussen, in the Proceedings of the 11 RISO International Symposium on Metallurgy and Materials Science, Structural Ceramics Processing, Microstructure and Properties, edited by J. J. Bentzen, J. B. Blide-Soresen, N. Christiansen, A. Horsewell and B. Ralph (RISO National University, Denmark, 1990) p. 1.
18. G. Sanders and M. V. Swain,Mater. Forum. 14 (1990) 60.
19. D. Munz, in “Fracture Mechanics of Ceramics, Measurements, Transformations, and High Temperature Fracture, Vol. 6,” edited by R. C. Bradit, A. G. Evans, D. P. H. Hasselman and F. F. Lange (Plenum Press, New York, 1983) p. 1.
20. T. Ohji, Y. K. Jeong, Y.-H. Choa and K. Niihara, J. Am. Ceram. Soc. 81 (1998) 1453.10.1111/j.1151-2916.1998.tb02503.x ↗
21. Y. S. Chou and D. J. Green, ibid. 76 (1993) 1452.10.1111/j.1151-2916.1993.tb03925.x ↗
22. R. Raj and M. F. Ashby, Metall. Trans. 2 (1971) 1113.10.1007/BF02664244 ↗