Fabrication of bioactive corrosion-resistant polyaniline/TiO2 nanotubes nanocomposite and their application in orthopedics
Source abstract
Abstract
The long-term permanence of titanium implant was improved by incorporation of polyaniline on TiO2 nanotubes. The polyaniline incorporated TiO2 nanotubes (PANI-2/TNTA) has enhanced the bioactivity and corrosion resistance. Highly ordered nanotubes were formed on the titanium metal with an average tube diameter of ~ 85 nm which was confirmed by HR-SEM. The presence of anatase and rutile mixed phases was identified by XRD analysis. The formation of interfacial bonding between PANI and TNTA was confirmed by Raman and XPS analysis. The lower corrosion current density and higher polarization resistance (Rp) obtained for PANI-2/TNTA nanocomposite revealed the enhanced corrosion resistance behavior in physiological conditions. To ensure the durability of PANI-2/TNTA, the corrosion behavior was analyzed at different applied potentials using dynamic electrochemical impedance spectroscopy (DEIS). Up to 1 V, the higher impedance value was observed in Hanks’ solution. The bioactivity of the PANI-2/TNTA nanocomposite was confirmed by the more-notable cell adhesion and proliferation of MG-63 osteoblast-like cells. PANI-2/TNTA has the ability to reduce implant-associated infections. The existence of the amine group is responsible for better biostability and antimicrobial activity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Chen Q, Thouas GA (2015) Metallic implant biomaterials. Mater Sci Eng R Rep 87:1–5710.1016/j.mser.2014.10.001 ↗
2. Gepreel MA-H, Niinomi M (2013) Biocompatibility of Ti-alloys for long-term implantation. J Mech Behav Biomed Mater 20:407–41510.1016/j.jmbbm.2012.11.014 ↗
3. Kalaiyarasan M, Saranya K, Rajendran N (2020) In-vitro corrosion assessment of silicate-coated AZ31 Mg alloy in Earle’s solution. J Mater Sci 55:3571–3587. https://doi.org/10.1007/s10853-019-04039-w10.1007/s10853-019-04039-w ↗
4. Li Y, Yang C, Zhao H, Qu S, Li X, Li Y (2014) New developments of Ti-based alloys for biomedical applications. Materials 7:1709–180010.3390/ma7031709 ↗
5. Fanton L, Cremasco A, Mello MG, Caram R (2019) Anodization growth of TiO2 nanotubes on Ti–35Nb–7Zr–5Ta alloy: effects of anodization time, strain hardening, and crystallographic texture. J Mater Sci 54:13724–13739 https://doi.org/10.1007/s10853-019-03870-510.1007/s10853-019-03870-5 ↗
6. Wang X, Xu S, Zhou S, Xu W, Leary M, Choong P et al (2016) Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review. Biomaterials 83:127–14110.1016/j.biomaterials.2016.01.012 ↗
7. Paramasivam I, Jha H, Liu N, Schmuki P (2012) A review of photocatalysis using self-organized TiO2 nanotubes and other ordered oxide nanostructures. Small 8:3073–310310.1002/smll.201200564 ↗
8. Han H, Song T, Lee E-K, Devadoss A, Jeon Y, Ha J et al (2012) Dominant factors governing the rate capability of a TiO2 nanotube anode for high power lithium ion batteries. ACS Nano 6:8308–831510.1021/nn303002u ↗
9. Mor GK, Varghese OK, Paulose M, Shankar K, Grimes CA (2006) A review on highly ordered, vertically oriented TiO2 nanotube arrays: fabrication, material properties, and solar energy applications. Sol Energy Mater Sol Cells 90:2011–207510.1016/j.solmat.2006.04.007 ↗
10. Lee H-C, Zhang L-F, Lin J-L, Chin Y-L, Sun T-P (2013) Development of anodic titania nanotubes for application in high sensitivity amperometric glucose and uric acid biosensors. Sensors 13:14161–1417410.3390/s131014161 ↗
11. Indira K, Mudali UK, Nishimura T, Rajendran N (2015) A review on TiO2 nanotubes: influence of anodization parameters, formation mechanism, properties, corrosion behavior, and biomedical applications. J Bio Tribo-Corrosion 1:2810.1007/s40735-015-0024-x ↗
12. Lario J, Viera M, Vicente Á, Igual A, Amigó V (2019) Corrosion behaviour of Ti6Al4 V ELI nanotubes for biomedical applications. J Mater Research and Technol 8:5548–555610.1016/j.jmrt.2019.09.023 ↗
13. Xiao X, Liu R (2008) Synthesis and bioactivity of highly ordered TiO2 nanotube arrays. Appl Surf Sci 255:365–36710.1016/j.apsusc.2008.06.108 ↗
14. Kunze J, Müller L, Macak JM, Greil P, Schmuki P, Müller FA (2008) Time-dependent growth of biomimetic apatite on anodic TiO2 nanotubes. Electrochim Acta 53:6995–700310.1016/j.electacta.2008.01.027 ↗
15. Yu W-Q, Qiu J, Zhang F-Q (2011) In vitro corrosion study of different TiO2 nanotube layers on titanium in solution with serum proteins. Colloid Surf B Biointerfaces 84:400–40510.1016/j.colsurfb.2011.01.033 ↗
16. Bjursten LM, Rasmusson L, Oh S, Smith GC, Brammer KS, Jin S (2010) Titanium dioxide nanotubes enhance bone bonding in vivo. J Biomed Mater Res Part A fficial J Soc Biomater Jpn Soc Biomater Austra Soc Biomater Korean Soc Biomater 92:1218–1224
17. Popat KC, Eltgroth M, LaTempa TJ, Grimes CA, Desai TA (2007) Decreased Staphylococcus epidermis adhesion and increased osteoblast functionality on antibiotic-loaded titania nanotubes. Biomaterials 28:4880–488810.1016/j.biomaterials.2007.07.037 ↗
18. Balint R, Cassidy NJ, Cartmell SH (2014) Conductive polymers: towards a smart biomaterial for tissue engineering. Acta Biomater 10:2341–235310.1016/j.actbio.2014.02.015 ↗
19. Marzocchi M, Gualandi I, Calienni M, Zironi I, Scavetta E, Castellani G et al (2015) Physical and electrochemical properties of PEDOT: PSS as a tool for controlling cell growth. ACS Appl Mater Interfaces 7:17993–1800310.1021/acsami.5b04768 ↗
20. Singh P, Shukla S (2020) Advances in polyaniline-based nanocomposites. J Mater Sci 20:1331–1365 https://doi.org/10.1007/s10853-019-04141-z10.1007/s10853-019-04141-z ↗
21. Bassett CAL, Becker RO (1962) Generation of electric potentials by bone in response to mechanical stress. Science 137:1063–106410.1126/science.137.3535.1063 ↗
22. Saranya K, Kalaiyarasan M, Chatterjee S, Rajendran N (2019) Dynamic electrochemical impedance study of fluoride conversion coating on AZ31 magnesium alloy to improve bio-adaptability for orthopedic application. Mater Corros 70:698–71010.1002/maco.201810360 ↗
23. Bolat G, Mareci D, Iacoban S, Cimpoesu N, Munteanu C (2013) The estimation of corrosion behavior of NiTi and NiTiNb alloys using dynamic electrochemical impedance spectroscopy. J Spectroscopy 2013:71492010.1155/2013/714920 ↗
24. Rikhari B, Mani SP, Rajendran N (2016) Investigation of corrosion behavior of polypyrrole-coated Ti using dynamic electrochemical impedance spectroscopy (DEIS). RSC Advances 6:80275–8028510.1039/C6RA09100H ↗
25. Srinivasan A, Shin KS, Rajendran N (2015) Applications of dynamic electrochemical impedance spectroscopy (DEIS) to evaluate protective coatings formed on AZ31 magnesium alloy. RSC Adv 5:29589–2959310.1039/C4RA16967K ↗
26. Agilan P, Rajendran N (2018) In-vitro bioactivity and electrochemical behavior of polyaniline encapsulated titania nanotube arrays for biomedical applications. Appl Surf Sci 439:66–7410.1016/j.apsusc.2017.12.258 ↗
27. Horcas I, Fernández R, Gomez-Rodriguez J, Colchero J, Gómez-Herrero J, Baro A (2007) WSXM: a software for scanning probe microscopy and a tool for nanotechnology. Rev Sci Instrum 78:01370510.1063/1.2432410 ↗
28. Mohan L, Anandan C, Rajendran N (2015) Electrochemical behaviour and bioactivity of self-organized TiO2 nanotube arrays on Ti–6Al–4V in Hanks’ solution for biomedical applications. Electrochim Acta 155:411–42010.1016/j.electacta.2014.12.032 ↗
29. Saranya K, Bhuvaneswari S, Chatterjee S, Rajendran N (2020) Biocompatible gadolinium-coated magnesium alloy for biomedical applications. J Mater Sci 55:11582–11596. https://doi.org/10.1007/s10853-020-04742-z10.1007/s10853-020-04742-z ↗
30. Mangwani N, Shukla SK, Rao TS, Das S (2014) Calcium-mediated modulation of Pseudomonas mendocina NR802 biofilm influences the phenanthrene degradation. Colloids Surf B 114:301–30910.1016/j.colsurfb.2013.10.003 ↗
31. Tentu S, Nandarapu K, Muthuraj P, Venkitasamy K, Venkatraman G, Rayala SK (2018) DHQZ-17, a potent inhibitor of the transcription factor HNF4A, suppresses tumorigenicity of head and neck squamous cell carcinoma in vivo. J Cell Physiol 233:2613–262810.1002/jcp.26139 ↗
32. Mohan L, Anandan C, Rajendran N (2015) Electrochemical behavior and effect of heat treatment on morphology, crystalline structure of self-organized TiO2 nanotube arrays on Ti–6Al–7Nb for biomedical applications. Mater Sci Eng C 50:394–40110.1016/j.msec.2015.02.013 ↗
33. Preethi L, Antony RP, Mathews T, Walczak L, Gopinath CS (2017) A study on doped heterojunctions in TiO2 nanotubes: an efficient photocatalyst for solar water splitting. Sci Rep 7:1431410.1038/s41598-017-14463-0 ↗
34. Radoičić M, Ćirić-Marjanović G, Šaponjić Z, Mitrić M, Konstantinović Z, Stoiljković M et al (2013) Structural and magnetic properties of nanocomposites based on nanostructured polyaniline and titania nanotubes. J Mater Sci 48:5776–5787https://doi.org/10.1007/s10853-013-7370-110.1007/s10853-013-7370-1 ↗
35. Trchová M, Morávková Z, Bláha M, Stejskal J (2014) Raman spectroscopy of polyaniline and oligoaniline thin films. Electrochim Acta 122:28–3810.1016/j.electacta.2013.10.133 ↗
36. Deshmukh P, Patil S, Bulakhe R, Pusawale S, Shim J-J, Lokhande C (2015) Chemical synthesis of PANI–TiO2 composite thin film for supercapacitor application. RSC Adv 5:68939–6894610.1039/C5RA09233G ↗
37. Chu J, Lu D, Wu B, Wang X, Gong M, Zhang R et al (2018) Synthesis and electrochromic properties of conducting polymers: polyaniline directly grown on fluorine-doped tin oxide substrate via hydrothermal techniques. Sol Energy Mater Sol Cells 177:70–7410.1016/j.solmat.2017.05.049 ↗
38. Lv H, Wang Y, Pan L, Zhang L, Zhang H, Shang L et al (2018) Patterned polyaniline encapsulated in titania nanotubes for electrochromism. Phys Chem Chem Phys 20:5818–582610.1039/C7CP07617G ↗
39. Portan D, Papaefthymiou K, Arvanita E, Jiga G, Papanicolaou G (2012) A combined statistical and microscopic analysis of TiO2 nanotubes synthesized under different electrochemical anodizing conditions. J Mater Sci 47:4696–4705https://doi.org/10.1007/s10853-012-6338-x10.1007/s10853-012-6338-x ↗
40. Wang J, Pan Y, Feng R, Cui H, Gong B, Zhang L et al (2020) Effect of electrolyte composition on the microstructure and bio-corrosion behavior of micro-arc oxidized coatings on biomedical Ti6Al4V alloy. J Mater Res Technol 9(2):1477–149010.1016/j.jmrt.2019.11.073 ↗
41. Mohammadpour R, Ahadian M, Taghavinia N, Dolati A (2009) Comparison of various anodization and annealing conditions of titanium dioxide nanotubular film on MB degradation. Eur Phys J Appl Phys 4710.1051/epjap/2009070 ↗
42. Varghese OK, Gong D, Paulose M, Grimes CA, Dickey EC (2003) Crystallization and high-temperature structural stability of titanium oxide nanotube arrays. J Mater Res 18:156–16510.1557/JMR.2003.0022 ↗
43. Tan A, Pingguan-Murphy B, Ahmad R, Akbar S (2012) Review of titania nanotubes: fabrication and cellular response. Ceram Int 38:4421–443510.1016/j.ceramint.2012.03.002 ↗
44. Mazare A, Dilea M, Ionita D, Titorencu I, Trusca V, Vasile E (2012) Changing bioperformance of TiO2 amorphous nanotubes as an effect of inducing crystallinity. Bioelectrochemistry 87:124–13110.1016/j.bioelechem.2012.01.002 ↗
45. Munirathinam B, Neelakantan L (2016) Role of crystallinity on the nanomechanical and electrochemical properties of TiO2 nanotubes. J Electroanal Chem 770:73–8310.1016/j.jelechem.2016.03.032 ↗
46. Munirathinam B, Pydimukkala H, Ramaswamy N, Neelakantan L (2015) Influence of crystallite size and surface morphology on electrochemical properties of annealed TiO2 nanotubes. Appl Surf Sci 355:1245–125310.1016/j.apsusc.2015.08.017 ↗
47. Indira K, KamachiMudali U, Rajendran N (2014) In vitro bioactivity and corrosion resistance of Zr incorporated TiO2 nanotube arrays for orthopaedic applications. Appl Surf Sci 316:264–27510.1016/j.apsusc.2014.08.001 ↗
48. Lee K, Mazare A, Schmuki P (2014) One-dimensional titanium dioxide nanomaterials: nanotubes. Chem Rev 114:9385–945410.1021/cr500061m ↗
49. Huo K, Gao B, Fu J, Zhao L, Chu PK (2014) Fabrication, modification, and biomedical applications of anodized TiO2 nanotube arrays. RSC Advances 4:17300–1732410.1039/C4RA01458H ↗
50. Indira K, Mudali UK, Rajendran N (2013) Corrosion behavior of electrochemically assembled nanoporous titania for biomedical applications. Ceram Int 39:959–96710.1016/j.ceramint.2012.07.013 ↗
51. Mazierski P, Nischk M, Gołkowska M, Lisowski W, Gazda M, Winiarski MJ et al (2016) Photocatalytic activity of nitrogen doped TiO2 nanotubes prepared by anodic oxidation: the effect of applied voltage, anodization time and amount of nitrogen dopant. Appl Catal B 196:77–8810.1016/j.apcatb.2016.05.006 ↗
52. Ma L, Huang Y, Hou M, Xie Z, Zhang Z (2015) Ag nanorods coated with ultrathin TiO2 shells as stable and recyclable SERS substrates. Sci Rep 5:1544210.1038/srep15442 ↗
53. Zhao Z, Zhou Y, Wan W, Wang F, Zhang Q, Lin Y (2014) Nanoporous TiO2/polyaniline composite films with enhanced photoelectrochemical properties. Mater Lett 130:150–15310.1016/j.matlet.2014.05.099 ↗
54. de Souza Filho EA, Pieretti EF, Bento RT, Pillis MF (2020) Effect of nitrogen-doping on the surface chemistry and corrosion stability of TiO2 films. J Mater Res Technol 9:922–93410.1016/j.jmrt.2019.11.032 ↗
55. Binkauskienė E, Jasulaitienė V, Lugauskas A (2009) Effect of Aspergillus niger Tiegh. L-10 on the physical and chemical properties of a polyaniline coating in the growth substrate. Synthetic Metals 159:1365–136810.1016/j.synthmet.2009.03.011 ↗
56. Lee T, Yun T, Park B, Sharma B, Song H-K, Kim B-S (2012) Hybrid multilayer thin film supercapacitor of graphene nanosheets with polyaniline: importance of establishing intimate electronic contact through nanoscale blending. J Mater Chem 22:21092–2109910.1039/c2jm33111j ↗
57. Shi L, Liang R-P, Qiu J-D (2012) Controllable deposition of platinum nanoparticles on polyaniline-functionalized carbon nanotubes. J Mater Chem 22:17196–1720310.1039/c2jm31859h ↗
58. Hilario F, Roche V, Nogueira RP, Junior AMJ (2017) Influence of morphology and crystalline structure of TiO2 nanotubes on their electrochemical properties and apatite-forming ability. Electrochim Acta 245:337–34910.1016/j.electacta.2017.05.160 ↗
59. Gebhardt F, Seuss S, Turhan M, Hornberger H, Virtanen S, Boccaccini AR (2012) Characterization of electrophoretic chitosan coatings on stainless steel. Mater Lett 66:302–30410.1016/j.matlet.2011.08.088 ↗
60. Catt K, Li H, Cui XT (2017) Poly (3, 4-ethylenedioxythiophene) graphene oxide composite coatings for controlling magnesium implant corrosion. Acta Biomater 48:530–54010.1016/j.actbio.2016.11.039 ↗
61. Raman V, Nagarajan S, Rajendran N (2006) Electrochemical impedance spectroscopic characterisation of passive film formed over β Ti–29Nb–13Ta–4.6 Zr alloy. Electrochem Commun 8:1309–131410.1016/j.elecom.2006.06.004 ↗
62. Deshpande PP, Sazou D (2016) Corrosion protection of metals by intrinsically conducting polymers. CRC Press, Boca Raton10.1201/b19045 ↗
63. Pandiselvi K, Thambidurai S (2015) Synthesis, characterization, and antimicrobial activity of chitosan–zinc oxide/polyaniline composites. Mater Sci Semicond Process 31:573–58110.1016/j.mssp.2014.12.044 ↗
64. Gizdavic-Nikolaidis MR, Bennett JR, Swift S, Easteal AJ, Ambrose M (2011) Broad spectrum antimicrobial activity of functionalized polyanilines. Acta Biomater 7:4204–420910.1016/j.actbio.2011.07.018 ↗
65. Saranya K, Kalaiyarasan M, Rajendran N (2019) Selenium conversion coating on AZ31 Mg alloy: a solution for improved corrosion rate and enhanced bio-adaptability. Surf Coat Technol 378:12490210.1016/j.surfcoat.2019.124902 ↗
66. Bidez PR, Li S, MacDiarmid AG, Venancio EC, Wei Y, Lelkes PI (2006) Polyaniline, an electroactive polymer, supports adhesion and proliferation of cardiac myoblasts. J Biomater Sci Polym Ed 17:199–21210.1163/156856206774879180 ↗
67. Bhattarai DP, Shrestha S, Shrestha BK, Park CH, Kim CS (2018) A controlled surface geometry of polyaniline doped titania nanotubes biointerface for accelerating MC3T3-E1 cells growth in bone tissue engineering. Chem Eng J 350:57–6810.1016/j.cej.2018.05.162 ↗
68. Liu S, Wang J, Zhang D, Zhang P, Ou J, Liu B et al (2010) Investigation on cell biocompatible behaviors of polyaniline film fabricated via electroless surface polymerization. Appl Surf Sci 256:3427–343110.1016/j.apsusc.2009.12.046 ↗
69. Wang C, Dong Y, Sengothi K, Tan K, Kang E (1999) In-vivo tissue response to polyaniline. Synth Met 102:1313–131410.1016/S0379-6779(98)01006-6 ↗
70. Sambyal P, Ruhi G, Mishra M, Gupta G, Dhawan SK (2018) Conducting polymer/bio-material composite coatings for corrosion protection. Mater Corros 69:402–41710.1002/maco.201709554 ↗
71. Kamalesh S, Tan P, Wang J, Lee T, Kang ET, Wang CH (2000) Biocompatibility of electroactive polymers in tissues. J Biomed Mater Res Official J Soc Biomater Jpn Soc Biomater Austra Soc Biomater Korean Soc Biomater 52:467–478
72. Ostrovidov S, Ebrahimi M, Bae H, Nguyen HK, Salehi S, Kim SB et al (2017) Gelatin–polyaniline composite nanofibers enhanced excitation–contraction coupling system maturation in myotubes. ACS Appl Mater Interfaces 9:42444–4245810.1021/acsami.7b03979 ↗
73. Li M, Guo Y, Wei Y, MacDiarmid AG, Lelkes PI (2006) Electrospinning polyaniline-contained gelatin nanofibers for tissue engineering applications. Biomaterials 27:2705–271510.1016/j.biomaterials.2005.11.037 ↗