Synthesis and electrochemical properties of cubic-like ZnMoO4 anode materials
Source abstract
Abstract
We prepared cubic-like ZnMoO4 anode material via precipitation-freeze drying method and calcining directly in the air using zinc acetate and ammonium molybdate tetrahydrate as raw materials. Through various characterization methods, the structure, morphology and electrochemical properties of cubic-like ZnMoO4 were studied. By comparing the structure and morphology of cubic-like ZnMoO4 and ordinary ZnMoO4, cubic-like ZnMoO4 had a smaller particle size and good dispersibility. In addition, compared with ordinary ZnMoO4, the electrochemical performance of cubic-like ZnMoO4 was improved. When accepted as an anode material for lithium-ion secondary batteries, the cubic-like ZnMoO4 provided a discharge capacity of 457.7 mAh g−1 at a current density of 0.1 A g−1 after 100 cycles. Moreover, it exhibited excellent electrochemical properties even at high current densities. The electrochemical results indicated that the cubic-like ZnMoO4 has high capacity, good rate ability, and outstanding cycle stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Gao W, Zhang X, Zheng X, Lin X, Cao H, Zhang Y, Sun Z (2017) Lithium carbonate recovery from cathode scrap of spent lithium-ion battery: a closed-loop process. Environ Sci Technol 51(3):1662–1669. https://doi.org/10.1021/acs.est.6b0332010.1021/acs.est.6b03320 ↗
2. Kobayashi T, Kobayashi Y, Miyashiro H (2017) Lithium migration between blended cathodes of a lithium-ion battery. J Mater Chem A 5:8653–8661. https://doi.org/10.1039/c7ta02056b10.1039/c7ta02056b ↗
3. Mukai K, Nakano H (2014) Factors affecting the volumetric energy density of lithium-ion battery materials: particle density measurements and cross-sectional observations of layered LiCo1–xNixO2. ACS Appl Mater Interfaces 6(13):10583–10592. https://doi.org/10.1021/am502242z10.1021/am502242z ↗
4. Zhang J, Yao X, Misra RK, Cai Q, Zhao Y (2020) Progress in electrolytes for beyond-lithium-ion batteries. J Mater Sci Technol 44:237–257. https://doi.org/10.1016/j.jmst.2020.01.01710.1016/j.jmst.2020.01.017 ↗
5. Hess M, Lebraud E, Levasseur A (1997) Graphite multilayer thin films: a new anode material for Li-ion microbatteries synthesis and characterization. J Power Sources 68(2):204–207. https://doi.org/10.1016/s0378-7753(96)02553-010.1016/s0378-7753(96)02553-0 ↗
6. Li T, Cao YL, Ai XP, Yang HX (2008) Cycleable graphite/FeSi6 alloy composite as a high capacity anode material for Li-ion batteries. J Power Sources 184(2):473–476. https://doi.org/10.1016/j.jpowsour.2008.02.05710.1016/j.jpowsour.2008.02.057 ↗
7. Zhao Y, Manthiram A (2015) Amorphous Sb2S3 embedded in graphite: a high-rate, long-life anode material for sodium-ion batteries. Chem Commun 51:13205–13208. https://doi.org/10.1039/C5CC03825A10.1039/C5CC03825A ↗
8. Yao WL, Wang JL, Yang J, Du GD (2008) Novel carbon nanofiber-cobalt oxide composites for lithium storage with large capacity and high reversibility. J Power Sources 176(1):369–372. https://doi.org/10.1016/j.jpowsour.2007.10.07310.1016/j.jpowsour.2007.10.073 ↗
9. Zhang L, Zheng S, Wang L, Tang H, Xue H, Wang G, Pang H (2017) Fabrication of metal molybdate micro/nanomaterials for electrochemical energy storage. Small 13(33):1700917. https://doi.org/10.1002/smll.20170091710.1002/smll.201700917 ↗
10. Wang Y, Wu Y, Xing L, Wang Q, Xue X-Y (2016) CoMoO4/Fe2O3 core-shell nanorods with high lithium-storage performance as the anode of lithium-ion battery. J Alloys Compd 689:655–661. https://doi.org/10.1016/j.jallcom.2016.08.02310.1016/j.jallcom.2016.08.023 ↗
11. Yang T, Zhang H, luo Y, Mei L, Guo D, Li Q, Wang T, (2015) Enhanced electrochemical performance of CoMoO4 nanorods/reduced graphene oxide as anode material for lithium-ion batteries. Electrochim Acta 158:327–332. https://doi.org/10.1016/j.electacta.2015.01.15410.1016/j.electacta.2015.01.154 ↗
12. Ju Z, Zhang E, Zhao Y, Xing Z, Zhuang Q, Qiang Y, Qian Y (2015) One-pot hydrothermal synthesis of FeMoO4 nanocubes as an anode material for lithium-ion batteries with excellent electrochemical performance. Small 11(36):4753–4761. https://doi.org/10.1002/smll.20150129410.1002/smll.201501294 ↗
13. Feng X, Huang Y, Chen M, Chen X, Li C, Zhou S, Gao X (2018) Self-assembly of 3D hierarchical MnMoO4/NiWO4 microspheres for high-performance supercapacitor. J Alloys Compd 763:801–807. https://doi.org/10.1016/j.jallcom.2018.06.02510.1016/j.jallcom.2018.06.025 ↗
14. Veerasubramani GK, Krishnamoorthy K, Sivaprakasam R, Kim SJ (2014) Sonochemical synthesis, characterization, and electrochemical properties of MnMoO4 nanorods for supercapacitor applications. Mater Chem Phys 147(3):836–842. https://doi.org/10.1016/j.matchemphys.2014.06.02810.1016/j.matchemphys.2014.06.028 ↗
15. Wei H, Yang J, Zhang Y, Qian Y, Geng H (2018) Rational synthesis of graphene-encapsulated uniform MnMoO4 hollow spheres as long-life and high-rate anodes for lithium-ion batteries. J Colloid Interface Sci 524:256–262. https://doi.org/10.1016/j.jcis.2018.03.10010.1016/j.jcis.2018.03.100 ↗
16. Ezeigwe ER, Khiew PS, Siong CW, Kong I, Tan MTT (2017) Synthesis of NiMoO4 nanorods on graphene and superior electrochemical performance of the resulting ternary based composites. Ceram Int 43(16):13772–13780. https://doi.org/10.1016/j.ceramint.2017.07.09210.1016/j.ceramint.2017.07.092 ↗
17. Seevakan K, Manikandan A, Devendran P, Shameem A, Alagesan T (2018) Microwave combustion synthesis, magneto-optical and electrochemical properties of NiMoO4 nanoparticles for supercapacitor application. Ceram Int 44(12):13879–13887. https://doi.org/10.1016/j.ceramint.2018.04.23510.1016/j.ceramint.2018.04.235 ↗
18. Fei J, Sun Q, Cui Y, Li J, Huang J (2017) Sodium carboxyl methyl cellulose and polyacrylic acid binder with enhanced electrochemical properties for ZnMoO4·0.8H2O anode in lithium ion batteries. J Electroanal Chem 804:158–164. https://doi.org/10.1016/j.jelechem.2017.09.06110.1016/j.jelechem.2017.09.061 ↗
19. Wan L, Shen J, Zhang Y, Li X (2017) Novel ZnMoO4/reduced graphene oxide hybrid as a high-performance anode material for lithium ion batteries. J Alloys Compd 708:713–721. https://doi.org/10.1016/j.jallcom.2017.03.07810.1016/j.jallcom.2017.03.078 ↗
20. Leyzerovich NN, Bramnik KG, Buhrmester T, Ehrenberg H, Fuess H (2004) Electrochemical intercalation of lithium in ternary metal molybdates MMoO4 (M: Cu, Zn, Ni and Fe). J Power Sources 127(1):76–84. https://doi.org/10.1016/j.jpowsour.2003.09.01010.1016/j.jpowsour.2003.09.010 ↗
21. Yuan S, Zhu Y-H, Li W, Wang S, Xu D, Li L, Zhang Y, Zhang X-B (2017) Surfactant-Free Aqueous Synthesis of Pure Single-Crystalline SnSe Nanosheet Clusters as Anode for High Energy- and Power-Density Sodium-Ion Batteries. Adv Mater 29(4):1602469. https://doi.org/10.1002/adma.20160246910.1002/adma.201602469 ↗
22. Zhao Y, Peng L, Liu B, Yu G (2014) Single-crystalline LiFePO4 nanosheets for high-rate li-ion batteries. Nano Lett 14(5):2849–2853. https://doi.org/10.1021/nl500856810.1021/nl5008568 ↗
23. Chen Z-h, Huang K-l, Liu S-q, Wang H-y (2010) Preparation and characterization of spinel LiMn2O4 nanorods as lithium-ion battery cathodes. Trans Nonferrous Met Soc China 20(12):2309–2313. https://doi.org/10.1016/S1003-6326(10)60646-210.1016/S1003-6326(10)60646-2 ↗
24. Gong Y, Sun L, Si H, Zhang Y, Shi Y, Wu L, Gu J, Zhang Y (2020) MnO nanorods coated by Co-decorated N-doped carbon as anodes for high performance lithium ion batteries. Appl Surf Sci 504:144479. https://doi.org/10.1016/j.apsusc.2019.14447910.1016/j.apsusc.2019.144479 ↗
25. Su W, Liang Y, Tang Y (2019) Facile situ synthesis of C@SnO2/Sn@rGO hybrid nanosheets as high performance anode materials for lithium-ion batteries. J Alloys Compd 801:402–408. https://doi.org/10.1016/j.jallcom.2019.05.28810.1016/j.jallcom.2019.05.288 ↗
26. Fei J, Sun Q, Li J, Cui Y, Huang J, Hui W, Hu H (2017) Synthesis and electrochemical performance of α-ZnMoO4 nanoparticles as anode material for lithium ion batteries. Mater Lett 198:4–7. https://doi.org/10.1016/j.matlet.2017.03.16010.1016/j.matlet.2017.03.160 ↗
27. Burton AW, Ong K, Rea T, Chan IY (2009) On the estimation of average crystallite size of zeolites from the Scherrer equation: a critical evaluation of its application to zeolites with one-dimensional pore systems. Microporous Mesoporous Mater 117(1):75–90. https://doi.org/10.1016/j.micromeso.2008.06.01010.1016/j.micromeso.2008.06.010 ↗
28. Dreger H, Haselrieder W, Kwade A (2019) Influence of dispersing by extrusion and calendering on the performance of lithium-ion battery electrodes. J Energy Storage 21:231–240. https://doi.org/10.1016/j.est.2018.11.02810.1016/j.est.2018.11.028 ↗
29. Nadimicherla R, Zha R, Wei L, Guo X (2016) Single crystalline flowerlike α-MoO3 nanorods and their application as anode material for lithium-ion batteries. J Alloys Compd 687:79–86. https://doi.org/10.1016/j.jallcom.2016.06.09910.1016/j.jallcom.2016.06.099 ↗
30. Xue R, Hong W, Pan Z, Jin W, Zhao H, Song Y, Zhou J, Liu Y (2016) Enhanced electrochemical performance of ZnMoO4/reduced graphene oxide composites as anode materials for lithium-ion batteries. Electrochim Acta 222:838–844. https://doi.org/10.1016/j.electacta.2016.11.04510.1016/j.electacta.2016.11.045 ↗
31. Zhang K, Xu R, Wei R, Li Y, Wang Y, Zhang Y, Dai Y, Yao Y (2020) Tunable polymorph and morphology synthesis of iron oxalate nanoparticles as anode materials for lithium ion batteries. Mater Chem Phys 243(1):122676. https://doi.org/10.1016/j.matchemphys.2020.12267610.1016/j.matchemphys.2020.122676 ↗
32. Wang L, Liang W, He S, Liu M, Zhao Y, Zhang W, Chen Y, Lai X, Bi J, Gao D (2020) Realization of superior electrochemical performances for ZnMoO4 anode material through the construction strategy of 3D flower-like single crystalline. J Alloys Compd 816:152673. https://doi.org/10.1016/j.jallcom.2019.15267310.1016/j.jallcom.2019.152673 ↗
33. Yadav P, Sinha E (2019) Structural, photophysical and microwave dielectric properties of α-ZnMoO4 phosphor. J Alloys Compd 795:446–452. https://doi.org/10.1016/j.jallcom.2019.05.01910.1016/j.jallcom.2019.05.019 ↗
34. Xie Q, Lin L, Ma Y, Zeng D, Yang J, Huang J, Wang L, Peng D-L (2017) Synthesis of ZnO-Cu-C yolk-shell hybrid microspheres with enhanced electrochemical properties for lithium ion battery anodes. Electrochim Acta 226:79–88. https://doi.org/10.1016/j.electacta.2016.12.18710.1016/j.electacta.2016.12.187 ↗
35. Palanisamy K, Kim Y, Kim H, Kim JM, Yoon W-S (2015) Self-assembled porous MoO2/graphene microspheres towards high performance anodes for lithium ion batteries. J Power Sources 275:351–361. https://doi.org/10.1016/j.jpowsour.2014.11.00110.1016/j.jpowsour.2014.11.001 ↗
36. Jiang R, Cui C, Ma H, Ma H, Chen T (2015) Study on the enhanced electrochemical performance of LiMn2O4 cathode material at 55°C by the nano Ag-coating. J Electroanal Chem 744:69–76. https://doi.org/10.1016/j.jelechem.2015.02.01610.1016/j.jelechem.2015.02.016 ↗
37. Wang Y, Xing G, Han ZJ, Shi Y, Wong JI, Huang ZX, Ostrikov K, Yang HY (2014) Pre-lithiation of onion-like carbon/MoS2 nano-urchin anodes for high-performance rechargeable lithium ion batteries. Nanoscale 6(15):8884–8890. https://doi.org/10.1039/C4NR01553C10.1039/C4NR01553C ↗
38. Wang H-Q, Lai F-Y, Li Y, Zhang X-H, Huang Y-G, Hu S-J, Li Q-Y (2015) Excellent stability of spinel LiMn2O4-based cathode materials for lithium-ion batteries. Electrochim Acta 177:290–297. https://doi.org/10.1016/j.electacta.2015.02.02710.1016/j.electacta.2015.02.027 ↗
39. Yu Y, Xiang M, Guo J, Su C, Liu X, Bai H, Bai W, Duan K (2019) Enhancing high-rate and elevated-temperature properties of Ni-Mg co-doped LiMn2O4 cathodes for Li-ion batteries. J Colloid Interface Sci 555:64–71. https://doi.org/10.1016/j.jcis.2019.07.07810.1016/j.jcis.2019.07.078 ↗
40. Wang F-M, Rick J (2014) Synergy of Nyquist and Bode electrochemical impedance spectroscopy studies to commercial type lithium ion batteries. Solid State Ionics 268(15):31–34. https://doi.org/10.1016/j.ssi.2014.09.02310.1016/j.ssi.2014.09.023 ↗
41. Wang F-M, Cheng H-M, Wu H-C, Chu S-Y, Cheng C-S, Yang C-R (2009) Novel SEI formation of maleimide-based additives and its improvement of capability and cyclicability in lithium ion batteries. Electrochim Acta 54(12):3344–3351. https://doi.org/10.1016/j.electacta.2008.12.03210.1016/j.electacta.2008.12.032 ↗
42. Shimizu M, Yatsuzuka R, Koya T, Yamakami T, Arai S (2018) Tin oxides as a negative electrode material for potassium-ion batteries. ACS Appl Energy Mater 1(12):6865–6870. https://doi.org/10.1021/acsaem.8b0120910.1021/acsaem.8b01209 ↗