Conductive polyelectrolyte multilayers PANI membranes synthesis for tunable filtration ranges
Source abstract
Abstract
Polyaniline membrane tends to swell and brittle when it undergoes excessive acid doping upon increasing its conductivity and hydrophilicity properties. Therefore, modification was done by introducing polyelectrolyte layers on polyaniline membrane surface with the aim to produce nanofiltration range membrane. Modification of PANI membrane with layer-by-layer polyelectrolyte is a new method for modifying PANI membrane; thus, the effect of doping time with number of polyelectrolyte bilayers with the membrane properties was investigated. From the results, the optimum doping time was 120 min to maximally increase the membrane’s hydrophilicity and conductivity. Next, introduction of polyelectrolyte layers on the membranes’ surface via layer-by-layer coating has found to decrease the porosity of the membranes top layer up to 10 times from ultrafiltration to nanofiltration ranges. Their surface hydrophilicity and negativity has also increased significantly while having a similar conductivity increment trend upon measured in wet condition (similar to water filtration condition). Furthermore, the permeability of the modified PANI membranes before and after back-flushing was performed for membranes cleaning process was seen to have no significant difference. Thus, it can be concluded that the presence of polyelectrolyte multilayers on the membrane surface has successfully formed a stable nano-range membrane with the same desired permeability even after back-flushing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Polymer Surface Interaction Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Alam J, Dass LA, Alhoshan MS, Ghasemi M, Mohammad AW (2011) Development of polyaniline-modified polysulfone nanocomposite membrane. Appl Water Sci 2(1):37–46. https://doi.org/10.1007/s13201-011-0021-210.1007/s13201-011-0021-2 ↗
2. Yusoff II, Rohani R, Mohammad AW (2016) Pressure driven conducting polymer membranes derived from layer-by-layer formation and characterization: a review. J Eng Sci Technol 11:1183–1206
3. Akbari A, Yegani R (2012) Study on the impact of polymer concentration and coagulation bath temperature on the porosity of polyethylene membranes fabricated via TIPS method. J Membr Sep Technol 1:100–10710.6000/1929-6037.2012.01.02.4 ↗
4. Boussu K, Van der Bruggen B, Volodin A, Van Haesendonck C, Delcour JA, Van der Meeren P, Vandecasteele C (2006) Characterization of commercial nanofiltration membranes and comparison with self-made polyethersulfone membranes. Desalination 191(1–3):245–253. https://doi.org/10.1016/j.desal.2005.07.02510.1016/j.desal.2005.07.025 ↗
5. Farrokhzad H, Darvishmanesh S, Genduso G, Van Gerven T, Van der Bruggen B (2015) Development of bivalent cation selective ion exchange membranes by varying molecular weight of polyaniline. Electrochim Acta 158:64–72. https://doi.org/10.1016/j.electacta.2015.01.06210.1016/j.electacta.2015.01.062 ↗
6. Faneer KA, Rohani R, Mohammad AW (2016) Polyethersulfone nanofiltration membrane incorporated with silicon dioxide prepared by phase inversion method for xylitol purification. Polym Polym Compos 24:803–808
7. Zaman NK, Rohani R, Shukor MHA, Mohamad AW (2016) Purification of high value succinic acid from biomass fermentation broth via nanofiltratio. Indian J Sci Technol 9:1–1010.17485/ijst/2016/v9i21/95244 ↗
8. Razali NF, Mohammad AW, Hilal N (2014) Effects of polyaniline nanoparticles in polyethersulfone ultrafiltration membranes: fouling behaviours by different types of foulant. J Ind Eng Chem 20:3134–3140. https://doi.org/10.1016/j.jiec.2013.11.05610.1016/j.jiec.2013.11.056 ↗
9. Khulbe KC, Feng CY, Matsuura T (2008) Synthetic polymeric membranes characterization. Atomic Force Microsc 18:5–14
10. Yusoff II, Rohani R, Mohammad AW (2016) Investigation of the formation characteristics of polyaniline and its application in forming free-standing pressure filtration membranes. J Polym Res 23:1–1310.1007/s10965-016-1068-4 ↗
11. Ulbricht M (2006) Advanced functional polymer membranes. Polymer 47:2217–2262. https://doi.org/10.1016/j.polymer.2006.01.08410.1016/j.polymer.2006.01.084 ↗
12. Sedaghat S (2014) Synthesis and characterization of new biocompatible copolymer: chitosan-graft-polyaniline. Int Nano Lett 4(2):1–5
13. Rohani R, Hyland M, Patterson DA (2016) Effects of process parameters on polyaniline nanofiltration membranes synthesis via phase inversion-immersion precipitation method. J Eng Sci Technol 11:16–35
14. Rohani R, Yusoff II (2019) Investigation on electrical tuneable separation properties for phase inversion polyaniline membranes doped in various acids. J Polym Res 26:125–13710.1007/s10965-019-1796-3 ↗
15. Xu L, Shahid S, Holda A, Emanuelsson E, Patterson D (2018) Stimuli responsive conductive polyaniline membrane: in-filtration electrical tuneability of flux and MWCO. J Membr Sci 552:153–16610.1016/j.memsci.2018.01.070 ↗
16. Sarihan A, Shahid S, Shen J, Amura I, Patterson DA, Emanuelsson EAC (2019) Exploiting the electrical conductivity of poly-acid doped polyaniline membranes with enhanced durability for organic solvent nanofiltration. J Membr Sci 579:11–2110.1016/j.memsci.2019.02.030 ↗
17. Ho KC, Teow YH, Mohammad AW (2019) Optimization of nanocomposite conductive membrane formulation and operating parameters for electrically-enhanced palm oil mill effluent filtration using response surface methodology. Process Saf Environ Prot 126:297–30810.1016/j.psep.2019.03.019 ↗
18. Xu L, Xu Y, Liu L, Wang KP, Patterson DA, Wang J (2019) Electrically responsive ultrafiltration polyaniline membrane to solve fouling under applied potential. J Membr Sci 572:442–45210.1016/j.memsci.2018.11.026 ↗
19. Anderson MR, Mattes BR, Reiss H, Kaner RB (1991) Gas separation membranes: a novel application for conducting polymers. Synth Metals 41:1151–115410.1016/0379-6779(91)91575-U ↗
20. Macdiarmid AG, Chiang JC, Richter AF (1987) Polyaniline: a new concept in conducting polymers. Synth Metals 18:285–29010.1016/0379-6779(87)90893-9 ↗
21. Chapman P, Loh XX, Livingston AG, Li K, Oliveira TAC (2008) Polyaniline membranes for the dehydration of tetrahydrofuran by pervaporation. J Membr Sci 309(1–2):102–111. https://doi.org/10.1016/j.memsci.2007.10.01610.1016/j.memsci.2007.10.016 ↗
22. See-Toh YH, Silva M, Livingston A (2008) Controlling molecular weight cut-off curves for highly solvent stable organic solvent nanofiltration (OSN) membranes. J Membr Sci 324:220–23210.1016/j.memsci.2008.07.023 ↗
23. Dan C, Yue-E M, Tianxi L (2013) Electrically conductive polyaniline/polyimide nanofiber membranes prepared via a combination of electrospinning and subsequent in situ polymerization growth. ACS Appl Mater Interfaces 5:1206–121210.1021/am303292y ↗
24. Hsing-Lin W, Junbo G, Jose-Maria S, Patrick M (2002) Fabrication and characterization of polyaniline monolithic actuators based on a novel configuration: integrally skinned asymmetric membrane. Chem Mater 14:2546–255210.1021/cm010933+ ↗
25. Merlini C, Barra GM, Ramoa SD, Contri G, Almeida RD, D’ávila MA, Soares BG (2015) Electrically conductive polyaniline-coated electrospun poly(vinylidene fluoride) mats. Front Mater 2:1–610.3389/fmats.2015.00014 ↗
26. Loh XX, Sairam M, Bismarck A, Steinke JHG, Livingston AG, Li K (2009) Crosslinked integrally skinned asymmetric polyaniline membranes for use in organic solvents. J Membr Sci 326(2):635–642. https://doi.org/10.1016/j.memsci.2008.10.04510.1016/j.memsci.2008.10.045 ↗
27. Lohokare HR, Bhole YS, Kharul UK (2006) Effect of support material on ultrafiltration membrane performance. J Appl Polym Sci 99(6):3389–3395. https://doi.org/10.1002/app.2303910.1002/app.23039 ↗
28. Rohani R, Yusoff II, Efdi FAM, Junaidi MUM (2017) Polyaniline composite membranes synthesis in presence of various acid dopants for pressure filtration. Jurnal Kejuruteraan 29:1–1310.17576/jkukm-2017-29(2)-08 ↗
29. Malmonge LF, Lopes GdA, Langiano SdC, Malmonge JA, Cordeiro JMM, Mattoso LHC (2006) A new route to obtain PVDF/PANI conducting blends. Eur Polym J 42(11):3108–3113. https://doi.org/10.1016/j.eurpolymj.2006.08.00210.1016/j.eurpolymj.2006.08.002 ↗
30. Chatzidaki EK, Favvas EP, Papageorgiou SK, Kanellopoulos NK, Theophilou NV (2007) New polyimide–polyaniline hollow fibers: synthesis, characterization and behavior in gas separation. Eur Polym J 43(12):5010–5016. https://doi.org/10.1016/j.eurpolymj.2007.09.00510.1016/j.eurpolymj.2007.09.005 ↗
31. Yusoff II, Rohani R, Zaman NK, Junaidi MUM, Mohammad AW, Zainal Z (2019) Durable pressure filtration membranes based on polyaniline–polyimide P84 Blends. Polym Eng Sci 2019:E83–E92
32. Sairam M, Loh XX, Li K, Bismarck A, Steinke JHG, Livingston AG (2009) Nanoporous asymmetric polyaniline films for filtration of organic solvents. J Membr Sci 330:166–174. https://doi.org/10.1016/j.memsci.2008.12.06710.1016/j.memsci.2008.12.067 ↗
33. Qaiser AA, Hyland MM, Patterson DA (2011) Membrane potential and impedance studies of polyaniline composite membranes: effects of membrane morphology. J Membr Sci 385–386:67–75. https://doi.org/10.1016/j.memsci.2011.09.02510.1016/j.memsci.2011.09.025 ↗
34. Zaman NK, Rohani R, Mohamad AW (2015) Surface modification of polyaniline onto PVDF membrane via radiation induced grafting. Jurnal Teknologi 77:197–20110.11113/jt.v77.4168 ↗
35. Sairam M, Loh XX, Bhole Y, Sereewatthanawut I, Li K, Bismarck A, Steinke JHG, Livingston AG (2010) Spiral-wound polyaniline membrane modules for organic solvent nanofiltration (OSN). J Membr Sci 349:123–129. https://doi.org/10.1016/j.memsci.2009.11.03910.1016/j.memsci.2009.11.039 ↗
36. Reza D, Reza BL, Samad S, Murzieh Z (2010) Control of corrosion in steel substrates by using polyelectrolyte multilayer nano-film. World Appl Sci J 9(10):1129–1138
37. Nithya J, Pejman A, Richard H, Ivo FJV (2013) Layer-by-layer preparation of polyelectrolyte multilayer membranes for separation. Polym Chem 5:1817–1822
38. Ng LY, Mohammad AW, Ng CY, Hairom NHH (2013) Stability and performance study of polyethersulfone membranes modified using polyelectrolytes. Jurnal Teknologi 65:7–1210.11113/jt.v65.2319 ↗
39. Yusoff II, Rohani R, Mohammad AW (2017) Molecular weight cut-off determination of pressure filtration membranes via colorimetric detection method. Malays J Anal Sci 21:484–49510.17576/mjas-2017-2102-24 ↗
40. Rohani R, Hyland M, Patterson D (2011) A refined one-filtration method for aqueous based nanofiltration and ultrafiltration membrane molecular weight cut-off determination using polyethylene glycols. J Membr Sci 382:278–290. https://doi.org/10.1016/j.memsci.2011.08.02310.1016/j.memsci.2011.08.023 ↗
41. Ng LY, Mohammad AW, Ng CY, Leo CP, Rohani R (2014) Development of nanofiltration membrane with high salt selectivity and performance stability using polyelectrolyte multilayers. Desalination 351:19–26. https://doi.org/10.1016/j.desal.2014.07.02010.1016/j.desal.2014.07.020 ↗
42. Hoek EMV, Kaner RB, Guillen GR, Farrell TP (2014) Polyaniline membranes, uses, and methods thereto. California Patent WO2014059339 A1, Oct 11, 2013
43. Fukuda H, Furukawa Y, Kasebe O, Kuno H, Takagi T (2003) Polyaniline-containing film, and process for forming this film Denso Corporation Patent EP1312634 A1, 31 Oct 2002
44. Timothy EH, Joseph BS (1993) Doping-induced strain in polyaniline: stretchoelectrochemistry. Chem Mater 5:951–95510.1021/cm00031a013 ↗
45. Bhadra S, Khastgir D, Singha NK, Lee JH (2009) Progress in preparation, processing and applications of polyaniline. Prog Polym Sci 34(8):783–810. https://doi.org/10.1016/j.progpolymsci.2009.04.00310.1016/j.progpolymsci.2009.04.003 ↗
46. Guimard N, Gomez N, Schmidt C (2007) Conducting polymers in biomedical engineering. Prog Polym Sci 32:876–92110.1016/j.progpolymsci.2007.05.012 ↗
47. Balint R, Cassidy NJ, Cartmell SH (2014) Conductive polymers: towards a smart biomaterial for tissue engineering. Acta Biomater 10:2341–235310.1016/j.actbio.2014.02.015 ↗
48. Ghasemi-Mobarakeh L, Prabhakaran M, Morshed M, Nasr-Esfahani M, Ramakrishna S (2009) Electrical stimulation of nerve cells using conductive nanofibrous scaffolds for nerve tissue engineering. Tissue Eng Part A 15:3605–361910.1089/ten.tea.2008.0689 ↗
49. Ravichandran R, Sundarrajan S, Venugopal JR, Mukherjee S, Ramakrishna S (2010) Applications of conducting polymers and their issues in biomedical engineering. J R Soc Interface 7(Suppl 5):S559–579. https://doi.org/10.1098/rsif.2010.0120.focus10.1098/rsif.2010.0120.focus ↗
50. Kaynak A, Rintoul L, George G (2000) Change of mechanical and electrical properties of polypyrrole films with dopant concentration and oxidative aging. Mater Res Bull 35:813–82410.1016/S0025-5408(00)00280-4 ↗
51. Mahat MM, Mawad D, Nelson GW, Fearn S, Palgrave RG, Payne DJ, Stevens MM (2015) Elucidating the deprotonation of polyaniline films by X-ray photoelectron spectroscopy. J Mater Chem C 3:7180–718610.1039/C5TC01038A ↗
52. Yifan Y, Dipak R, Takeshi M, Songyuan Z, Christopher QL (2014) Criteria for the selection of a support material to fabricate coated membranes for a life support device. RSC Adv 4:38711–3871710.1039/C4RA04638B ↗
53. Xuehong L, Jianwei X, Limin W (2006) Blends of polyimide and dodecylbenzene sulfonic acid-doped polyaniline: effects of polyimide structure on electrical conductivity and its thermal degradation. Synth Metals 156:117–12310.1016/j.synthmet.2005.10.022 ↗
54. Toutianoush A, Krasemann L, Tieke B (2002) Polyelectrolyte multilayer membranes for pervaporation separation of alcohol/water mixtures. Colloids Surf A 198–200:881–88910.1016/S0927-7757(01)01015-9 ↗
55. Fadhillah F, Zaidi SMJ, Khan Z, Khaled MM, Rahman F, Hammond PT (2013) Development of polyelectrolyte multilayer thin film composite membrane for water desalination application. Desalination 318:19–24. https://doi.org/10.1016/j.desal.2013.03.01110.1016/j.desal.2013.03.011 ↗
56. Rana D, Matsuura T (2010) Surface modifications for antifouling membranes. Chem Rev 110:2448–247110.1021/cr800208y ↗
57. Chung YT, Ng LY, Mohammad AW (2014) Sulfonated-polysulfone membrane surface modification by employing methacrylic acid through UV-grafting: optimization through response surface methodology approach. J Ind Eng Chem 20:1549–155710.1016/j.jiec.2013.07.046 ↗
58. Stockton WB, Rubner MF (1997) Molecular-level processing of conjugated polymers. 4. Layer-by-layer manipulation of polyaniline via hydrogen-bonding interactions. Macromolecules 30:2717–272510.1021/ma9700486 ↗
59. Ribeiro DV, Souza CAC, Abrantes JCC (2015) Use of Electrochemical Impedance Spectroscopy (EIS) to monitoring the corrosion of reinforced concrete. IBRACON Struct Mater J 8:529–54610.1590/S1983-41952015000400007 ↗
60. Nouri E, Mohammadi MR, Lianos P (2018) Construction of perovskite solar cells using inorganic hole-extracting components. ACS Omega 3:46–5410.1021/acsomega.7b01775 ↗
61. Fl Müller, Ferreira CA, Azambuja DS, Alemán C, Armelin E (2014) Measuring the proton conductivity of ion-exchange membranes using electrochemical impedance spectroscopy and through-plane cell. J Phys Chem B 118:1102–111210.1021/jp409675z ↗
62. Ji S, Zhang G, Liu Z, Peng Y, Wang Z (2008) Evaluations of polyelectrolyte multilayer membranes assembled by a dynamic layer-by-layer technique. Desalination 234(1–3):300–306. https://doi.org/10.1016/j.desal.2007.09.09810.1016/j.desal.2007.09.098 ↗
63. Mohammad A, Ng C, Lim Y, Ng G (2012) Ultrafiltration in food processing industry: review on application membrane fouling, and fouling control. Food Bioprocess Technol 5:1143–115610.1007/s11947-012-0806-9 ↗
64. van de Ven WJC, Pünt IGM, Zwijnenburg A, van der Meer AJB, Kemperman WGJ, Wessling M (2008) Hollow fiber ultrafiltration: the concept of partial backwashing. J Membr Sci 320:319–32410.1016/j.memsci.2008.04.037 ↗
65. Ho KC, Teow YH, Mohammad AW, Ang WL, Lee PH (2018) Development of graphene oxide (GO)/multi-walled carbon nanotubes (MWCNTs) nanocomposite conductive membranes for electrically enhanced fouling mitigation. J Membr Sci 552:189–20110.1016/j.memsci.2018.02.001 ↗