journal article·2016-06

The influence of the pore structure in ordered mesoporous carbon over the formation of Cu species and their catalytic activity towards the methanol oxidative carbonylation

Xia Wang, Tingjun Fu, Huayan Zheng, Guoqiang Zhang, Zhong Li

Journal of Materials Science· Volume 51· Issue 11
Publisher page

Abstract

Two ordered mesoporous carbon (OMC) materials with different structures were prepared and used as supports for Cu catalysts. One is prepared by soft-template method (denoted as SOMC), and the other is by hard-template method (donated as HOMC). The microstructures of OMC and Cu/OMC were characterized by XRD, H2-TPR, BET, and TEM. The catalytic activity in oxidative carbonylation of methanol to dimethyl carbonate (DMC) was evaluated in a fixed-bed reactor under atmosphere pressure. Both OMC materials own highly ordered mesostructures, but their pore structure differences have remarkable influences on Cu dispersion, location, valence, as well as the corresponding contents. SOMC has long hollow interiors 3.6 nm in diameter, and most Cu particles are located on its outer surface. By contrast, HOMC is made up of ordered arrays of carbon nanorods, and most Cu particles are homogeneously distributed inside the interconnected 3.6 nm mesoporous among the nanorods. Stronger interaction between Cu particles and HOMC and better Cu dispersion of Cu/HOMC resulted in easier autoreduction of CuO to Cu2O compared with that of Cu/SOMC. As a result, Cu/SOMC exhibited better stability, while Cu/HOMC performed better in terms of the methanol conversion and DMC space–time yield. Besides, increasing the copper loading moderately could be considered as a good option to improve the methanol conversion and space–time yield of DMC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon dioxide utilization in catalysis · Catalytic Processes in Materials Science · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Andersson K, Salazar CM (2015) Methanol as a marine fuel report for Methanol Institute, FCBI Energy
2. Tundo P, Selva M (2002) The chemistry of dimethyl carbonate. Acc Chem Res 35(9):706–71610.1021/ar010076f ↗
3. Li Z, Xie K, Slade RCT (2001) High selective catalyst CuCl/MCM-41 for oxidative carbonylation of methanol to dimethyl carbonate. Appl Catal A 205(1–2):85–9210.1016/S0926-860X(00)00546-9 ↗
4. Merza G, László B, Oszkó A, Pótári G, Baán K, Erdőhelyi A (2014) The direct synthesis of dimethyl carbonate by the oxicarbonylation of methanol over Cu supported on carbon nanotube. J Mol Catal A 393:117–124. doi: 10.1016/j.molcata.2014.06.01010.1016/j.molcata.2014.06.010 ↗
5. Wang R, Li Z, Zheng H, Xie K (2010) Preparation of chlorine-free Cu/AC catalyst and its catalytic properties for vapor phase oxidative carbonylation of methanol. Chin J Catal 31(7):851–856. doi: 10.3724/sp.j.1088.2010.00102
6. Zhang R, Song L, Wang B, Li Z (2012) A density functional theory investigation on the mechanism and kinetics of dimethyl carbonate formation on Cu2O catalyst. J Comput Chem 33(11):1101–111010.1002/jcc.22939 ↗
7. Li Z, Wen C, Wang R, Zheng H, Xie K (2009) Chloride-free Cu2O/AC catalyst prepared by pyrolysis of copper acetate and catalytic oxycarbonylation. Chem J Chin Univ 30(10):2024–2031
8. Munnik P, de Jongh PE, de Jong KP (2015) Recent developments in the synthesis of supported catalysts. Chem Rev 115(14):6687–671810.1021/cr500486u ↗
9. Neimark AV, Kheifets LI, Fenelonov VB (1981) Theory of preparation of supported catalysts. Ind Eng Chem Prod Res Dev 20(3):439–45010.1021/i300003a006 ↗
10. Sietsma JRA, Friedrich H, Broersma A, Versluijs-Helder M, Jos van Dillen A, de Jongh PE, de Jong KP (2008) How nitric oxide affects the decomposition of supported nickel nitrate to arrive at highly dispersed catalysts. J Catal 260(2):227–23510.1016/j.jcat.2008.10.007 ↗
11. Yan B, Huang S, Wang S, Ma X (2014) Catalytic oxidative carbonylation over Cu2O nanoclusters supported on carbon materials: the role of the carbon support. Chem Cat Chem 6(9):2671–2679
12. Zhang G, Li Z, Zheng H, Fu T, Ju Y, Wang Y (2015) Influence of the surface oxygenated groups of activated carbon on preparation of a nano Cu/AC catalyst and heterogeneous catalysis in the oxidative carbonylation of methanol. Appl Catal B 179:95–105. doi: 10.1016/j.apcatb.2015.05.00110.1016/j.apcatb.2015.05.001 ↗
13. Darmstadt H, Roy C, Kaliaguine S, Joo SH, Ryoo R (2003) Pore structure and graphitic surface nature of ordered mesoporous carbons probed by low-pressure nitrogen adsorption. Microporous Mesoporous Mater 60(1–3):139–14910.1016/S1387-1811(03)00335-4 ↗
14. Kruk M, Jaroniec M, Joo SH, Ryoo R (2003) Characterization of regular and plugged SBA-15 silicas by using adsorption and inverse carbon replication and explanation of the plug formation mechanism. J Phys Chem B 107(10):2205–221310.1021/jp0271514 ↗
15. Guo R, Zhao L, Yue W (2015) Assembly of core–shell structured porous carbon–graphene composites as anode materials for lithium-ion batteries. Electrochim Acta 152:338–34410.1016/j.electacta.2014.11.140 ↗
16. Ling L, Qing-han M (2005) Electrochemical properties of mesoporous carbon aerogel electrodes for electric double layer capacitors. J Mater Sci 40(15):4105–4107. doi: 10.1007/s10853-005-0644-510.1007/s10853-005-0644-5 ↗
17. Wang H, Wan Y (2009) Synthesis of ordered mesoporous Pd/carbon catalyst with bimodal pores and its application in water-mediated Ullmann coupling reaction of chlorobenzene. J Mater Sci 44(24):6553–6562. doi: 10.1007/s10853-009-3612-710.1007/s10853-009-3612-7 ↗
18. García A, Nieto A, Vila M, Vallet-Regí M (2013) Easy synthesis of ordered mesoporous carbon containing nickel nanoparticles by a low temperature hydrothermal method. Carbon 51:410–418. doi: 10.1016/j.carbon.2012.08.07410.1016/j.carbon.2012.08.074 ↗
19. Ji Z, Liang S, Jiang Y, Li H, Liu Z, Zhao T (2009) Synthesis and characterization of ruthenium-containing ordered mesoporous carbon with high specific surface area. Carbon 47(9):2194–219910.1016/j.carbon.2009.04.001 ↗
20. Zeng J, Su F, Lee JY, Zhao XS, Chen J, Jiang X (2007) Method for preparing highly dispersed Pt catalysts on mesoporous carbon support. J Mater Sci 42(17):7191–7197. doi: 10.1007/s10853-007-1571-410.1007/s10853-007-1571-4 ↗
21. Jun S, Joo SH, Ryoo R, Kruk M, Jaroniec M, Liu Z, Ohsuna T, Terasaki O (2000) Synthesis of new, nanoporous carbon with hexagonally ordered mesostructure. J Am Chem Soc 122(43):10712–1071310.1021/ja002261e ↗
22. Eggenhuisen TM, Friedrich H, Nudelman F, Zečević J, Sommerdijk NAJM, de Jongh PE, de Jong KP (2013) Controlling the distribution of supported nanoparticles by aqueous synthesis. Chem Mater 25(6):890–89610.1021/cm3037845 ↗
23. Yan B, Huang S, Meng Q, Shen Y, Wang S, Ma X (2013) Ordered mesoporous carbons supported wacker-type catalyst for catalytic oxidative carbonylation. AIChE J 59(10):3797–3805. doi: 10.1002/aic.1409110.1002/aic.14091 ↗
24. Yang YF, Jia LT, Hou B, Li DB, Wang JG, Sun YH (2014) Incorporation of highly dispersed cobalt nanoparticles into the ordered mesoporous carbon for CO hydrogenation. Catal Lett 144(1):133–14110.1007/s10562-013-1124-1 ↗
25. Meng Y, Gu D, Zhang F, Shi Y, Yang H, Li Z, Yu C, Tu B, Zhao D (2005) Ordered mesoporous polymers and homologous carbon frameworks: amphiphilic surfactant templating and direct transformation. Angewandte Chemie 117(43):7215–7221. doi: 10.1002/ange.20050156110.1002/ange.200501561 ↗
26. Lin D, Jiang Y, Chen S, Chen S, Sun S (2012) Preparation of Pt nanoparticles supported on ordered mesoporous carbon FDU-15 for electrocatalytic oxidation of CO and methanol. Electrochim Acta 67:127–13210.1016/j.electacta.2012.02.007 ↗
27. Xue C, Lv Y, Zhang F, Wu L, Zhao D (2012) Copper oxide activation of soft-templated mesoporous carbons and their electrochemical properties for capacitors. J Mater Chem 22(4):1547–155510.1039/C1JM14349B ↗
28. Zhai Y, Dou Y, Zhao D, Fulvio PF, Mayes RT, Dai S (2011) Carbon materials for chemical capacitive energy storage. Adv Mater 23(42):4828–485010.1002/adma.201100984 ↗
29. Liu R, Shi Y, Wan Y, Meng Y, Zhang F, Gu D, Chen Z, Tu B, Zhao D (2006) Triconstituent Co-assembly to ordered mesostructured polymer-silica and carbon-silica nanocomposites and large-pore mesoporous carbons with high surface areas. Adv Mater 128(35):11652–11662
30. Oliveira LCA, Silva CN, Yoshida MI, Lago RM (2004) The effect of H2 treatment on the activity of activated carbon for the oxidation of organic contaminants in water and the H2O2 decomposition. Carbon 42(11):2279–228410.1016/j.carbon.2004.05.003 ↗
31. Horikawa T, Sakao N, Sekida T, Ji Hayashi, Do DD, Katoh M (2012) Preparation of nitrogen-doped porous carbon by ammonia gas treatment and the effects of N-doping on water adsorption. Carbon 50(5):1833–184210.1016/j.carbon.2011.12.033 ↗
32. Grayfer ED, Kibis LS, Stadnichenko AI, Vilkov OY, Boronin AI, Slavinskaya EM, Stonkus OA, Fedorov VE (2015) Ultradisperse Pt nanoparticles anchored on defect sites in oxygen-free few-layer graphene and their catalytic properties in CO oxidation. Carbon 89:290–29910.1016/j.carbon.2015.03.050 ↗
33. Wang X, Liang C, Dai S (2008) Facile synthesis of ordered mesoporous carbons with high thermal stability by self-assembly of resorcinol–formaldehyde and block copolymers under highly acidic conditions. Langmuir 24(14):7500–750510.1021/la800529v ↗
34. Zhao CX, Yang YX, Wu ZX, Field M, Fang XY, Burke N, Chiang K (2014) Synthesis and facile size control of well-dispersed cobalt nanoparticles supported on ordered mesoporous carbon. J Mater Chem 2(46):19903–1991310.1039/C4TA04561K ↗
35. Sietsma JRA, Meeldijk JD, Versluijs-Helder M, Broersma A, Dillen AJV, de Jongh PE, de Jong KP (2008) Ordered mesoporous silica to study the preparation of Ni/SiO2 ex nitrate catalysts: impregnation, drying, and thermal treatments. Chem Mater 20(9):2921–293110.1021/cm702610h ↗
36. Dancini-Pontes I, DeSouza M, Silva FA, Scaliante MHNO, Alonso CG, Bianchi GS, Medina Neto A, Pereira GM, Fernandes-Machado NRC (2015) Influence of the CeO2 and Nb2O5 supports and the inert gas in ethanol steam reforming for H2 production. Chem Eng J 273:66–74. doi: 10.1016/j.cej.2015.03.03210.1016/j.cej.2015.03.032 ↗
37. Fu T, Jiang Y, Lv J, Li Z (2013) Effect of carbon support on Fischer–Tropsch synthesis activity and product distribution over Co-based catalysts. Fuel Process Technol 110:141–14910.1016/j.fuproc.2012.12.006 ↗
38. Trépanier M, Dalai AK, Abatzoglou N (2010) Synthesis of CNT-supported cobalt nanoparticle catalysts using a microemulsion technique: role of nanoparticle size on reducibility, activity and selectivity in Fischer–Tropsch reactions. Appl Catal A-Gen 374(1–2):79–8610.1016/j.apcata.2009.11.029 ↗
39. Hu Q, Fan G, Zhang S, Yang L, Li F (2015) Gas phase hydrogenation of dimethyl-1,4-cyclohexane dicarboxylate over highly dispersed and stable supported copper-based catalysts. J Mol Catal A: Chem 397:134–14110.1016/j.molcata.2014.10.032 ↗
40. Ud Din I, Shaharun MS, Subbarao D, Naeem A (2015) Synthesis, characterization and activity pattern of carbon nanofibers based copper/zirconia catalysts for carbon dioxide hydrogenation to methanol: influence of calcination temperature. J Power Sources 274:619–62810.1016/j.jpowsour.2014.10.087 ↗