High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic

The effects of temperature on the fast fracture behavior of aluminum nitride with 5 wt% Y2O3 ceramic were investigated. Four-point flexural strength and fracture toughness were measured in air at several temperatures (30–1,300 °C). The flexural strength gradually decreased with the increase of temperature up to 1,000 °C due to the change in the fracture mode from transgranular to intergranular, and then became almost constant up to 1,300 °C. Two main flaw types as fracture origin were identified: small surface flaw and large pores. The volume fraction of the large pores was only 0.01%; however, they limited the strength on about 50% of the specimens. The fracture toughness decreased slightly up to 800 °C controlled by the elastic modulus change, and then decreased significantly at 1,000 °C due to the decrease in the grain-boundary toughness. Above 1,000 °C, the fracture toughness increased significantly, and at 1,300 °C, its value was close to that measured at room temperature.