Effect of mixing rate on the morphology of primary Al phase in the controlled diffusion solidification (CDS) process
Source abstract
Abstract
Controlled diffusion solidification is a novel and promising process wherein near-net-shaped cast product of a desired Al wrought alloy is obtained by mixing two precursor alloys at specific individual composition, mass, and temperature each to obtain a non-dendritic morphology of the primary Al phase in the solidified microstructure. This study is devoted to quantify the effect of the rate of mixing of the two precursor alloys on the morphology of the primary Al phase in the cast component. The results show that the lower mixing rate with a higher mixing velocity is more favorable for the CDS process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Saha D, Shankar S, Apelian D, Makhlouf MM (2004) Metall Mater Trans A 35A:217410.1007/s11661-004-0167-8 ↗
2. Goetzl CG, Ellis JL (1952) US Patent 2,611,443, September 30, 1952
3. Langford G, Cunningham RE (1978) Metall Trans B 9B:510.1007/BF02822665 ↗
4. Apelian D, Langford G (1980) J Met 32(9):28
5. Wang J et al. (2002) Mater Sci Eng A338
6. Ashtari P, Birsan G, Khalaf A, Shankar S (2011) Int J Met Cast 2011(Spring):4310.1007/BF03355471 ↗
7. Symeonidis K (2009) PhD thesis, Worcester Polytechnic Institute, April
8. Saha D, Shankar S, Apelian D, Makhlouf M (2004) In: Crepeau P, Tiryakioglu M (eds) Proceedings of the John Campbell Honorary symposium. The Minerals, Metals & Materials Society (TMS), Warrendale
9. Birsan G (2009) Master Thesis, Mechanical Engineering, McMaster University
10. Ashtari P, Birsan G, Shankar S (2009) In: Campbell J, Crepeau PN, Tiryakioglu M (eds) Shape casting: the 3rd international symposium. The Minerals, Metals and Materials Society (TMS), Warrendale, pp 223–230
11. Khalaf AA, Ashtari P, Shankar S (2009) In: Campbell J, Crepeau PN, Tiryakioglu M (eds) Shaped casting: the 3rd international symposium. The Minerals, Metals and Materials Society (TMS), Warrendale, pp. 215–222
12. Khalaf A, Ashtari P, Shankar S (2009) Metall Mater Trans B 40B:84310.1007/s11663-009-9285-4 ↗
13. Khalaf AA (2010) PhD Thesis, McMaster University, Hamilton, ON, Canada, pp. 72–90
14. Vishan V, Narlikar AV (1976) Mater Res Bull II:I257
15. ASM Handbook Committee (1973) Metals handbook, metallographic, structure and phase diagram, vol 8, 8th edn. American Society for Metals, Materials Park, OH
16. Kirkwood DH et al (2009) Springer Ser Mater Sci 124:22
17. Khalaf AA, Shankar S (2011) Metal Mater Trans A 42A:245610.1007/s11661-011-0641-z ↗
18. Smallman RE, Bishop RJ (1999) Modern physical metallurgy and materials engineering, 6th edn. Butterworth-Heinemann, Oxford, p 41
19. Bruus H (2008) Theoretical microfluidics. Oxford University Press, Oxford
20. Kurz W, Fisher DJ (1989) Fundamentals of solidification, 3rd edn. Trans Tech Publications, Enfield
21. Apelian D, Makhlouf MM, Saha D (2006) Mater Sci Forum 519–521:177110.4028/www.scientific.net/MSF.519-521.1771 ↗