Synthesis and characterization of TiC-reinforced iron-based composites Part II on mechanical characterization
Source abstract
Abstract
The hardness, impact toughness and wear resistance properties of Fe-TiC composites, synthesized by aluminothermic reduction of an industrial waste, have been evaluated. The wear resistance property of the composites has been compared with some standard wear resistant materials. It has been found that the wear resistance property of the Fe-TiC composites with mostly pearlitic, fully pearlitic and pearlitic plus cementite type matrix with about 7 to 8 vol% TiC is better than that of a standard high chromium iron. The wear resistance property of ferritic and mostly ferritic type matrix with about 5 vol% TiC is better than that of a standard bearing steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. E. PAGOUNIS, M. TALVITIE and V. K. LINDROOS, Metall. Mater. Trans. A 27A (1996) 4171.10.1007/BF02595665 ↗
2. Idem., ibid. 27A (1996) 4183.10.1007/BF02595666 ↗
3. V. K. RAI, R. SRIVASTAVA, S. K. NATH and S. RAY, Wear 231 (1999) 265.10.1016/S0043-1648(99)00127-1 ↗
4. E. PAGOUNIS, M. TALVITIE and V. K. LINDROSS, Powder Metall. 40 (1997) 55.10.1179/pom.1997.40.1.55 ↗
5. J. M. PANCHAL, T. VELA and T. RABISSCH,"Fabrication of Particulate Reinforced Composites" (ASM International, Materials Park, OH, 1990) p. 245.
6. J. KUEBARSEPP, PhD thesis, Tallin Technical University, Tallin, 1992, p. 8.
7. K. DAS, T. K. BANDYOPADHYAY and S. DAS, J. Mater. Sci. 37 (2002) 3881.10.1023/A:1019699205003 ↗
8. K. DAS and T. K. BANDYOPADHYAY, accepted for publication in Journal of Materials Science.
9. P. P. BANDYOPADHYAY, PhD thesis, Indian Institute of Technology, Kharagpur, India, 2001.
10. "CRC Materials Science and Engineering Handbook," 3rd ed, edited by J. F. Shackelford and W. Alexander (CRC Press, Boca Raton, Florida, 2001) p. 471.
11. K. DAS and T. K. BANDYOPADHYAY (unpublished research).
12. N. FRAGE, L. LEVIN, E. MANOR, R. SHNECK and J. ZABICKY, Scripta Materialia 35 (1996) 798.
13. N. P. SUH, Wear 62 (1980) 1.10.1016/0043-1648(80)90033-2 ↗
14. K. DAS, T. K. BANDYOPADHYAY, S. GHOSH and A. B. CHATTOPADHYAY, Mater. Manufact. Proc. 19 (2004) 313.10.1081/AMP-120029937 ↗
15. O. N. DOGAN and J. A. HAWK, Wear 189 (1995) 136.10.1016/0043-1648(95)06682-9 ↗
16. M. M. KHRUSCHOV, ibid. 28 (1974) 69.10.1016/0043-1648(74)90102-1 ↗
17. J. KÜBARSEPP, H. KLAASEN and J. PIRSO, ibid. 249 (2001) 229.10.1016/S0043-1648(01)00569-5 ↗
18. G. Y. LEE, C. K. H. DHARAN and R. O. RITCHIE, ibid. 252 (2002) 322.10.1016/S0043-1648(01)00896-1 ↗
19. Y. GELLER,"Tool Steels" (Mir Publishers, Moscow, 1978) p. 186.
20. J. F. ARCHARD, J. Appl. Phys. 24 (1953) 981.10.1063/1.1721448 ↗
21. K. H. ZUM GAHR, Tribology Intl. 31 (1998) 587.10.1016/S0301-679X(98)00079-6 ↗