Organically modified layered zinc phenylphosphonate reinforced stereocomplex-type poly(lactic acid) nanocomposites with highly enhanced mechanical properties and degradability
Source abstract
Abstract
In this study, stereocomplex-type poly(l-lactide) (SC-PLA)/organo-modified layered zinc phenylphosphonate (m-PPZn) nanocomposites were synthesized and characterized as a new material for green material usages. A long-chain oleylamine was selected to modify layered zinc phenylphosphonate (PPZn). The structural arrangement of the original and oleylamine-modified PPZn was determined using wide-angle X-ray diffraction (WAXD), and m-PPZn exhibited a large interlayer spacing of 30.3 A. The correlation length of PPZn derived using several orders of peak profiles decreased with oleylamine addition, suggesting that the structural arrangement of m-PPZn exhibits less perfect alignment. The mechanical properties, structure, and morphology of the SC-PLA/m-PPZn nanocomposites were characterized with dynamic mechanical analysis, WAXD, and transmission electron microscopy (TEM). Both WAXD and TEM results demonstrate that most of the layered materials of partial delamination are randomly dispersed in the SC-PLA matrix. Mechanical properties of the fabricated 1 wt% SC-PLA/m-PPZn nanocomposites show significant enhancements in the storage modulus when compared to SC-PLA matrix. The biodegradability of SC-PLA/m-PPZn nanocomposites was studied with Trizma buffer solution containing proteinase K. It has been shown that the SC-PLA/m-PPZn nanocomposites exhibit a much higher disintegration rate than that of the SC-PLA matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Bone Tissue Engineering Materials · Chemical Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Auras R, Harte B, Selke S (2004) An overview of polylactides as packaging materials. Macromol Biosci 4:835–86410.1002/mabi.200400043 ↗
2. Penning JP, Dijkstra H, Pennings AJ (1993) Preparation and properties of absorbable fibres from l-lactide copolymers. Polymer 34:942–95110.1016/0032-3861(93)90212-S ↗
3. Pluta M, Galeski A (2007) Plastic deformation of amorphous poly(l/dl-lactide): structure evolution and physical properties. Biomacromolecules 8:1836–184310.1021/bm061229v ↗
4. Lee JH, Park TG, Park HS, Lee DS, Lee YK, Yoon SC, Nam JD (2003) Thermal and mechanical characteristics of poly(l-lactic acid) nanocomposite scaffold. Biomaterials 24:2773–277810.1016/S0142-9612(03)00080-2 ↗
5. Grijpma DW, Pennings AJ (1994) (Co) polymers of l-lactide, 1. Synthesis, thermal properties and hydrolytic degradation. Macromol Chem Phys 195:1633–164710.1002/macp.1994.021950515 ↗
6. Ikada Y, Jamshidi K, Tsuji H, Hyon SH (1987) Stereocomplex formation between enantiomeric poly(lactides). Macromolecules 20:904–90610.1021/ma00170a034 ↗
7. Tsuji H, Ikada Y, Hyon SH, Kimura Y, Kitao T (1994) Stereocomplex formation between enantiomeric poly(lactic acid). VIII. Complex fibers spun from mixed solution of poly(d-lactic acid) and poly(l-lactic acid). J Appl Polym Sci 51:337–34410.1002/app.1994.070510216 ↗
8. Tsuji H (2005) Poly(lactide) stereocomplexes: formation, structure, properties, degradation, and applications. Macromol Biosci 5:569–59710.1002/mabi.200500062 ↗
9. Chen YA, Wu TM (2014) Crystallization kinetics of poly(1,4-butylene adipate) with stereocomplexed poly(lactic acid) serving as a nucleation agent. Ind Eng Chem Res 53:16689–1669510.1021/ie503303u ↗
10. Feijoo JL, Cabedo L, Giménez E, Lagaron JM, Saura JJ (2005) Development of amorphous PLA-montmorillonite nanocomposites. J Mater Sci 40:1785–178810.1007/s10853-005-0694-8 ↗
11. Ray SS, Okamoto M (2003) Biodegradable polylactide and its nanocomposites: opening a new dimension for plastics and composites. Macromol Rapid Commun 24:815–84010.1002/marc.200300008 ↗
12. Neppalli R, Causin V, Marega C, Modesti M, Adhikari R, Scholtyssek S, Ray SS, Marigo A (2014) The effect of different clays on the structure, morphology and degradation behavior of poly(lactic acid). Appl Clay Sci 87:278–28410.1016/j.clay.2013.11.029 ↗
13. Chiang MF, Chen EC, Wu TM (2012) Preparation, mechanical properties and thermal stability of poly(l-lactide)/γ-polyglutamate-modified layered double hydroxide nanocomposites. Polym Degrad Stab 97:995–100110.1016/j.polymdegradstab.2012.03.011 ↗
14. Chiang MF, Wu TM (2010) Synthesis and characterization of biodegradable poly(l-lactide)/layered double hydroxide nanocomposites. Compos Sci Technol 70:110–11510.1016/j.compscitech.2009.09.012 ↗
15. Li Y, Han C, Zhang X, Xu K, Bian J, Dong L (2014) Poly(l-lactide)/poly(d-lactide)/clay nanocomposites: enhanced dispersion, crystallization, mechanical properties, and hydrolytic degradation. Polym Eng Sci 54:914–92410.1002/pen.23620 ↗
16. Re GL, Benali S, Habibi Y, Raquez JM, Dubois P (2014) Stereocomplexed PLA nanocomposites: from in situ polymerization to materials properties. Eur Polym J 54:138–15010.1016/j.eurpolymj.2014.03.004 ↗
17. Lonkar SP, Morlat-Therias S, Caperaa N, Leroux F, Gardette JL, Singh RP (2009) Preparation and nonisothermal crystallization behavior of polypropylene/layered double hydroxide nanocomposites. Polymer 50:1505–151510.1016/j.polymer.2009.01.031 ↗
18. Wu TM, Wu CY (2006) Biodegradable poly(lactic acid)/chitosan-modified montmorillonite nanocomposites: preparation and characterization. Polym Degrad Stab 91:2198–220410.1016/j.polymdegradstab.2006.01.004 ↗
19. Wang S, Han C, Bian J, Han L, Wang X, Dong L (2011) Morphology, crystallization and enzymatic hydrolysis of poly(l-lactide) nucleated using layered metal phosphonates. Polym Int 60:284–29510.1002/pi.2947 ↗
20. He L, Sun J, Wang X, Fan X, Zhao Q, Cai L, Song R, Ma Z, Huang W (2012) Unzipped multiwalled carbon nanotubes-incorporated poly(l-lactide) nanocomposites with enhanced interface and hydrolytic degradation. Mater Chem Phys 134:1059–106610.1016/j.matchemphys.2012.03.113 ↗
21. Pan P, Liang Z, Cao A, Inoue Y (2009) Layered metal phosphonate reinforced poly(l-lactide) composites with a highly enhanced crystallization rate. ACS Appl Mater Interface 1:402–41110.1021/am800106f ↗
22. Tsuboi T, Katayama H, Itoh T (2013) Crystallization behavior of poly(vinylidene fluoride) composites containing zinc phenylphosphonate. Polym Eng Sci 2013(53):843–84810.1002/pen.23331 ↗
23. Xu T, Wang Y, He D, Xu Y, Li Q, Shen C (2014) Nucleation effect of layered metal phosphonate on crystallization of isotactic polypropylene. Polym Test 34:131–13910.1016/j.polymertesting.2014.01.010 ↗
24. Yu F, Pan P, Nakamura N, Inoue Y (2011) Nucleation effect of layered metal phosphonate on crystallization of bacterial Poly[(3-hydroxybutyrate)-co-(3-hydroxyhexanoate)]. Macromol Mater Eng 296:103–11210.1002/mame.201000248 ↗
25. Wu N, Wang H (2013) Effect of zinc phenylphosphonate on the crystallization behavior of poly(l-lactide). J Appl Polym Sci 130:2744–275210.1002/app.39471 ↗
26. Cheetham AK, Férey G, Loiseau T (1999) Open-framework inorganic materials. Angew Chem Int Ed 38:3268–329210.1002/(SICI)1521-3773(19991115)38:22<3268::AID-ANIE3268>3.0.CO;2-U ↗
27. Clearfield A (1998) Organically pillared micro- and mesoporous materials. Chem Mater 10:2801–281010.1021/cm9802191 ↗
28. Dines MB, DiGiacomo PM (1981) Derivatized lamellar phosphates and phosphonates of M(IV) Ions. Inorg Chem 20:92–9710.1021/ic50215a022 ↗
29. Alberti G, Costantino U, Allulli S, Tomassini N (1978) Crystalline Zr(R-PO3)2 and Zr(R-OPO3)2 compounds (R = organic radical): a new class of materials having layered structure of the zirconium phosphate type. J Inorg Nucl Chem 40:1113–111710.1016/0022-1902(78)80520-X ↗
30. Cao G, Lee H, Lynch VM, Mallouk TE (1988) Synthesis and structural characterization of a homologous series of divalent-metal phosphonates, MII(O3PR)–H2O and MII (HO3PR). Inorg Chem 27:2781–278510.1021/ic00289a008 ↗
31. Martin KJ, Squattrito PJ, Clearfield A (1989) The crystal and molecular structure of zinc phenylphosphonate. Inorg Chim Acta 155:7–910.1016/S0020-1693(00)89271-3 ↗
32. Poojary DM, Clearfield A (1995) Coordinative intercalation of alkylamines into layered zinc phenylphosphonate. Crystal structures from X-ray powder diffraction data. J Am Chem Soc 117:11278–1128410.1021/ja00150a027 ↗
33. Zhang Y, Scott KJ, Clearfield A (1995) Intercalation of alkylamines into dehydrated and hydrated phenylphosphonates. J Mater Chem 5:315–31810.1039/jm9950500315 ↗
34. Mourdikoudis S, Liz-Marzán LM (2013) Oleylamine in nanoparticle synthesis. Chem Mater 25:1465–147610.1021/cm4000476 ↗
35. Borges J, Ribeiro JA, Pereira EM, Carreira CA, Pereira CM, Silva F (2001) Preparation and characterization of DNA films using oleylamine modified Au surfaces. J Colloid Interface Sci 358:626–63410.1016/j.jcis.2011.03.039 ↗
36. Song SY, Ma JF, Yang J, Cao MH, Li KC (2005) Selected-Control Synthesis of Metal Phosphonate Nanoparticles and Nanorods. Inorg Chem 44:2140–214210.1021/ic048436t ↗
37. Hosemann R, Hindeleh AM (1995) Structure of crystalline and paracrystalline condensed matter. J Macromol Sci 34:327–35610.1080/00222349508219497 ↗
38. Wu TM, Blackwell J, Chvalun SN (1995) Determination of the axial correlation lengths and paracrystalline distortion for aromatic copolyimides of random monomer sequence. Macromolecules 28:7349–735410.1021/ma00126a011 ↗
39. Okihara T, Tsuji M, Kawaguchi A, Katayama KI, Tsuji H, Hyon SH, Ikada Y (1991) Crystal structure of stereocomplex of poly(l-lactide) and poly(d-lactide). J Macromol Sci B30:119–14010.1080/00222349108245788 ↗
40. Zhang J, Sato H, Tsuji H, Noda I, Ozaki Y (2005) Differences in the CH3···O = C interactions Aaong ply(l-lactide), ply(l-lactide)/ply(d-lactide) stereocomplex, and poly(3-hydroxybutyrate) studied by infrared spectroscopy. J Mol Struct 735:249–25710.1016/j.molstruc.2004.11.033 ↗
41. Kumagai Y, Doi Y (1992) Enzymatic degradation and morphologies of binary blends of microbial poly(3-hydroxy butyrate) with poly(ε-caprolactone), poly(1,4-butylene adipate and poly(vinyl acetate). Polym Degrad Stab 36:241–24810.1016/0141-3910(92)90062-A ↗
42. Tokiwa Y, Calabia B, Ugwu C, Aiba S (2009) Biodegradability of Plastics. Int J Mol Sci 10:3722–374210.3390/ijms10093722 ↗
43. Numata K, Finne-Wistrand A, Albertsson AC, Doi Y, Abe H (2008) Enzymatic degradation of monolayer for poly(lactide) revealed by real-time atomic force microscopy: effects of stereochemical structure, molecular weight, and molecular branches on hydrolysis rates. Biomacromolecules 9:2180–218510.1021/bm800281d ↗
44. Bikiaris DN (2013) Nanocomposites of aliphatic polyesters: an overview of the effect of different nanofillers on enzymatic hydrolysis and biodegradation of polyesters. Polym Degrad Stab 98:1908–192810.1016/j.polymdegradstab.2013.05.016 ↗
45. Eili M, Shameli K, Ibrahim NA, Yunus WMZW (2012) Degradability enhancement of poly(lactic acid) by stearate-Zn3Al LDH nanolayers. Int J Mol Sci 13:7938–795110.3390/ijms13077938 ↗
46. Ma F, Lu X, Wang Z, Sun Z, Zhang F, Zheng Y (2011) Nanocomposites of poly(l-lactide) and surface modified magnesia nanoparticles: fabrication, mechanical property and biodegradability. J Phys Chem Solids 72:111–11610.1016/j.jpcs.2010.11.008 ↗
47. Ray SS, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28:1539–164110.1016/j.progpolymsci.2003.08.002 ↗
48. Ray SS, Yamada K, Okamoto M, Ueda K (2003) New polylactide-layered silicate nanocomposites. 2. Concurrent improvements of material properties, biodegradability and melt rheology. Polymer 44:857–86610.1016/S0032-3861(02)00818-2 ↗