Achieving high strain rate superplasticity via severe plastic deformation processing
Source abstract
Abstract
In this study, a thermomechanical process consisting of general precipitation and severe plastic deformation through equal channel angular extrusion (ECAE) was applied to a Zn-22 wt.% Al alloy to produce a microduplex structure for high strain rate (HSR) superplasticity studies. Microstructures, hardness, and superplastic properties of the Zn–Al alloy were studied by using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), recordable hydraulic press, and a tensile test with a hot stage. A work-softening phenomenon due to the occurrence of a grain boundary-sensitive dynamic recrystallization (DRX) was observed during the ECAE processing of the Zn–Al alloy at the extrusion temperatures investigated from −10 °C to 50 °C. An important discovery regarding the grain boundary-sensitive DRV was realized in this study such that through a progressive work-softening process the Zn–Al alloy will eventually exhibit HSR superplastic properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Casolco SR, Parra ML, Torres-Villasenor G (2006) J Mater Process Technol 174:389. doi:https://doi.org/10.1016/j.jmatprotec.2005.02.27110.1016/j.jmatprotec.2005.02.271 ↗
2. Kaibyshev R, Avtokratova E, Apollonov A et al (2006) Scr Mater 54:2119. doi:https://doi.org/10.1016/j.scriptamat.2006.03.02010.1016/j.scriptamat.2006.03.020 ↗
3. Nikulin I, Kaibyshev R, Sakai T (2005) Mater Sci Eng A 407:62. doi:https://doi.org/10.1016/j.msea.2005.06.01410.1016/j.msea.2005.06.014 ↗
4. Watanabe H, Ishikawa K, Mukai T (2007) Key Eng Mater 340–341:10710.4028/www.scientific.net/KEM.340-341.107 ↗
5. Lee CJ, Huang JC (2006) Mater Trans 47:2773. doi:https://doi.org/10.2320/matertrans.47.277310.2320/matertrans.47.2773 ↗
6. Beyerlein IJ, Alexander DJ, Tome CN (2007) J Mater Sci 42:1733. doi:https://doi.org/10.1007/s10853-006-0906-x10.1007/s10853-006-0906-x ↗
7. Saravanan M, Pillai RM, Pai BC et al (2006) Bull Mater Sci 29:679
8. Kumar P, Xu C, Langdon TG (2006) Mater Sci Eng A 429:324. doi:https://doi.org/10.1016/j.msea.2006.05.04410.1016/j.msea.2006.05.044 ↗
9. Tanaka T, Watanabe H, Kohzu M et al (2004) Mater Sci Forum 447–448:48910.4028/www.scientific.net/MSF.447-448.489 ↗
10. Huang WH, Yu CY, Kao PW et al (2004) Mater Sci Eng A 366:221. doi:https://doi.org/10.1016/j.msea.2003.08.03310.1016/j.msea.2003.08.033 ↗
11. Staszewski M, Wesolowski J, Morawiec H (1996) Z Metallk 87:144
12. Purcek G (2005) J Mater Process Technol 169:242. doi:https://doi.org/10.1016/j.jmatprotec.2005.03.01210.1016/j.jmatprotec.2005.03.012 ↗
13. Purcek G, Altan BS, Miskioglu I et al (2004) J Mater Process Technol 148:279. doi:https://doi.org/10.1016/j.jmatprotec.2004.02.01010.1016/j.jmatprotec.2004.02.010 ↗
14. Komura S, Furukawa M, Horita Z et al (2001) Mater Sci Eng A 297:111. doi:https://doi.org/10.1016/S0921-5093(00)01255-710.1016/S0921-5093(00)01255-7 ↗
15. Valiev RZ, Alexandrov IV, Zhu YT et al (2002) J Mater Res 17:5. doi:https://doi.org/10.1557/JMR.2002.000210.1557/JMR.2002.0002 ↗