Study on Ti fiber reinforced TiAl3 composite by infiltration-in situ reaction
Source abstract
Abstract
This study is concerned with investigation of forming Ti fiber reinforced TiAl3 composite by infiltration-in situ reaction. The as-cast material was obtained by pressing molten pure Al into a preform which was composed of Ti particles and Ti fibers. Based on the differential scanning calorimetry (DSC) result, in situ reaction samples were obtained by heating as-cast materials to 660, 950, and 1300 °C, and held for 1 h, respectively. The microstructure evolution of in situ reaction samples was analyzed by scanning electron microscope and Energy dispersive X-ray (EDX). In addition, the phase composition of products was inspected by X-ray diffraction (XRD). Experiment results show that TiAl3 was formed initially, which was the unique product between Ti and Al. While at high temperature, products of Ti fibers and Al were complex, and TixAl1−x (0.25 < x < 0.75) compounds were formed around Ti fibers. Finally, TiAl3 decomposed, and oxidation occurred. The mechanism of in situ reaction between Ti and Al in this system was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Clemens H, Kestler H (2000) Adv Eng Mater 2:55110.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
2. Wu XH (2006) Intermetallics 14:111410.1016/j.intermet.2005.10.019 ↗
3. Djanarthany S, Viala J-C, Bouix J (2001) Mater Chem Phys 72:30110.1016/S0254-0584(01)00328-5 ↗
4. Colinet C, Pasturel A (2002) Intermetallics 10:75110.1016/S0966-9795(02)00054-7 ↗
5. Wang T, Zhang JS (2006) Mater Chem Phys 99:2010.1016/j.matchemphys.2005.08.075 ↗
6. Milman YV, Miracle DB, Chugunova SI, Voskoboinik IV, Korzhova NP, Legkaya TN, Podrezov YN (2001) Intermetallics 9:83910.1016/S0966-9795(01)00073-5 ↗
7. Hsu CJ, Chang CY, Kao PW, Ho NJ, Chang CP (2006) Acta Mater 54:524110.1016/j.actamat.2006.06.054 ↗
8. Prakash U, Buckley RA, Jones H, Sellars CM (1992) J Mater Sci 27:2001. doi:https://doi.org/10.1007/BF0111791010.1007/BF01117910 ↗
9. Kiyoshi M, Kanryu I, Masami S, Masao I, Masakazu K, Isamu Y (2006) Mater Sci Eng A 428:17510.1016/j.msea.2006.04.112 ↗
10. Mileiko ST, Povarova KB, Korzhov VP, Serebryakov AV, Kolchin AA, Kiiko VM, Starostin MY, Sarkissyan NS, Antonova AV (2001) Scripta Mater 44:246310.1016/S1359-6462(01)00924-1 ↗
11. Sanguinetti Ferreira RA, Arvieu C, Quenisset JM (2005) Scripta Mater 53:32910.1016/j.scriptamat.2005.04.007 ↗
12. Sanguinetti Ferreira RA, Arvieu C, Guillaume B, Quenisset JM (2006) Composites Part A 37:183110.1016/j.compositesa.2005.10.004 ↗
13. Lü XH, Yang YQ, Ma ZJ, Liu CX, Chen Y (2006) Trans Nonferrous Met Soc China 16:7710.1016/S1003-6326(06)60014-9 ↗
14. Zhang QC, He GY, Wu JS (2000) Mater Sci Technol 8(4):77
15. He GY, Hu SP, Chu SJ, Li LF, Zhang TX, Cai XZ (1996) Chin J Nonferrous Met 6(4):110
16. Mark A, Didier de F (1992) Phys Rev B 46(9):505510.1103/PhysRevB.46.5055 ↗
17. Kattner UR, Lin JC, Chang YA (1992) Metall Trans 23A:208110.1007/BF02646001 ↗
18. Liu Y, Huang BY, He YH (2000) Trans Nonferrous Met Soc China 10(1):29
19. Jinkeun O, Sung G, Sunghak L, Nack JK (2003) J Mater Sci 38:3647. doi:https://doi.org/10.1023/A:102563760040010.1023/A:1025637600400 ↗
20. Kovács K, Perczel IV, Josepovits VK, Kiss G, Réti F, Deák P (2002) Appl Surf Sci 200:18510.1016/S0169-4332(02)00875-9 ↗
21. Camille YJ, William EL, Evan C (2006) Intermetallics 14:5410.1016/j.intermet.2005.04.011 ↗
22. Zollinger J, Lapin J, Daloz D, Combeau H (2007) Intermetallics 15:134310.1016/j.intermet.2007.04.002 ↗