Fabrication of polymeric honeycomb microporous films: breath figures strategy and stabilization of water droplets by fluorinated diblock copolymer micelles
Source abstract
Abstract
Polymeric honeycomb microporous films were prepared from fluorinated diblock copolymers, poly(tert-butyl acrylate)-b-poly(2-[(perfluorononenyl)oxy]ethyl methacrylate) (PtBA-b-PFNEMAs), and four other commercial polymers, including polystyrene (PS), polycarbonate (PC), polylactic acid (PLA), and polymethylmethacrylate (PMMA) via breath figures method. The as-formed fluorinated diblock copolymer micelles in chloroform were not only utilized to stabilize the templated water droplets in bulk, but also introduced as the water droplets stabilizer in other polymeric materials. Our strategy was successfully achieved, as the micropores were decorated with the fluorinated diblock copolymer as directly shown in the SEM images and FT-IR/ATR-FTIR. Polymer concentration and the solution casting volume effects were checked to tune the sizes of the micropores in diblock copolymer films. The ratio of the added fluorinated diblock copolymer as a novel factor to tune the sizes of the micropores was also investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Block Copolymer Self-Assembly · Advanced Polymer Synthesis and Characterization · Pickering emulsions and particle stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Yabu H, Hirai Y, Kojima M, Shimomura M (2008) J Adhesion Sci Technol 22:27710.1163/156856108X305174 ↗
2. Menard E, Meitl MA, Sun Y, Park J-U, Shir DJL, Nam YS, Jeon S, Rogers JA (2007) Chem Rev 107:111710.1021/cr050139y ↗
3. Heiko Uwe, Bunz F (2006) Adv Mater 18:97310.1002/adma.200501131 ↗
4. Vohra V, Yunus S, Attout A, Giovanella U, Scavia G, Tubino R, Botta C, Bolognesi A (2009) Soft Matter 5:165610.1039/b819811j ↗
5. Fukuhira Y, Kitazono E, Hayashi T, Kaneko H, Tanaka M, Shimomura M, Sumi Y (2006) Biomaterials 27:179710.1016/j.biomaterials.2005.10.019 ↗
6. Park MS, Kim JK (2005) Langmuir 21:1140410.1021/la051273g ↗
7. Beattie D, Wong KH, Williams C, Poole-Warren LA, Davis TP, Barner-Kowollik C, Stenzel MH (2006) Biomacromolecules 7:107210.1021/bm050858m ↗
8. Yabu H, Takebayashi M, Tanaka M, Shimomura M (2005) Langmuir 21:323510.1021/la050013w ↗
9. Kim E, Xia Y, Whitesides GM (1995) Nature 376:58110.1038/376581a0 ↗
10. Xu H, Ling XY, van Bennekom J, Duan X, Ludden MJW, Reinhoudt DN, Wessling M, Lammertink RGH, Huskens J (2008) J Am Chem Soc 131:79710.1021/ja807611n ↗
11. Darling SB (2007) Prog Polym Sci 32:115210.1016/j.progpolymsci.2007.05.004 ↗
12. Lange B, Wagner J, Zentel R (2006) Macromol Rapid Commun 27:174610.1002/marc.200600429 ↗
13. Mikos AG, Thorsen AJ, Czerwonka LA, Bao Y, Langer R, Winslow DN, Vacanti JP (1994) Polymer 35:106810.1016/0032-3861(94)90953-9 ↗
14. Whang K, Thomas CH, Healy KE, Nuber G (1995) Polymer 36:83710.1016/0032-3861(95)93115-3 ↗
15. Coombes AGA, Heckman JD (1992) Biomaterials 13:29710.1016/0142-9612(92)90053-Q ↗
16. Widawski G, Rawiso M, François B (1994) Nature 369:39710.1038/369387a0 ↗
17. Pitois O, François B (1999) Colloid Polym Sci 277:57410.1007/s003960050427 ↗
18. Erdogan B, Song LL, Wilson JN, Park JO, Srinivasarao M, Bunz UHF (2004) J Am Chem Soc 126:367810.1021/ja0320020 ↗
19. Srinivasarao M, Collings D, Philips A, Patel S (2001) Science 292:7910.1126/science.1057887 ↗
20. Billon L, Manguian M, Pellerin V, Joubert M, Eterradossi O, Garay H (2009) Macromolecules 42:34510.1021/ma8020568 ↗
21. Gugliuzza A, Aceto MC, Macedonio F, Drioli E (2008) J Phys Chem B 112:1048310.1021/jp802130u ↗
22. Saunders AE, Dickson JL, Shah PS, Lee MY, Lim KT, Johnston KP, Korgel BA (2006) Phys Rev E 73:03160810.1103/PhysRevE.73.031608 ↗
23. Munoz-Bonilla A, Ibarboure E, Papon E, Rodriguez-Hernandez J (2009) Langmuir 25:649310.1021/la9003214 ↗
24. Park MS, Kim JK (2004) Langmuir 20:534710.1021/la035915g ↗
25. Pitois O, François B (1999) Eur Phys J B 8:22510.1007/s100510050685 ↗
26. Stenzel MH, Barner-Kowollik C, Davis TP (2006) J Polym Sci Part A Polym Chem 44:236310.1002/pola.21334 ↗
27. Ameduri B, Boutevin B (eds) (2004) Well-architectured fluoropolymers: synthesis, properties, and applications. Elsevier, Amsterdam
28. Hirao A, Sugiyama K, Yokoyama H (2007) Prog Polym Sci 32:139310.1016/j.progpolymsci.2007.08.001 ↗
29. Hexemer A, Sivaniah E, Kramer EJ, Xiang M, Li X, Fischer DA, Ober CK (2004) J Polym Sci Part B 42:41110.1002/polb.10686 ↗
30. Skrabania K, Laschewsky A, Berlepsch Hv, Böttcher C (2009) Langmuir 25:759410.1021/la900253j ↗
31. Skrabania K, Berlepsch Hv, Böttcher C, Laschewsky A (2009) Macromolecules 43:27110.1021/ma901913f ↗
32. Qin S, Li H, Yuan W, Zhang Y (2011) Polymer 52:119110.1016/j.polymer.2011.01.022 ↗
33. Fukuhira Y, Yabu H, Ijiro K, Shimomura M (2009) Soft Matter 5:203710.1039/b821183c ↗
34. Govor LV, Bashmakov IA, Kiebooms R, Dyakonov V, Parisi J (2001) Adv Mater 13:58810.1002/1521-4095(200104)13:8<588::AID-ADMA588>3.0.CO;2-C ↗
35. Kojima M, Hirai Y, Yabu H, Shimomura M (2009) Polym J 41:66710.1295/polymj.PJ2009027 ↗
36. Li H, Zhang ZB, Hu CP, Ying SK, Wu SS, Xu XD (2003) React Funct Polym 56:18910.1016/S1381-5148(03)00051-8 ↗
37. Steyer A, Guenoun P, Beysens D, Knobler CM (1990) Phys Rev B 42:108610.1103/PhysRevB.42.1086 ↗
38. Peng J, Han Y, Yang Y, Li B (2004) Polymer 45:44710.1016/j.polymer.2003.11.019 ↗
39. Cui L, Peng J, Ding Y, Li X, Han Y (2005) Polymer 46:533410.1016/j.polymer.2005.04.018 ↗
40. Maruyama N, Koito T, Nishida J, Sawadaishi T, Cieren X, Kjiro K, Karthaus O, Shimomura M (1998) Thin Solid Films 327:85410.1016/S0040-6090(98)00777-9 ↗
41. Tian Y, Ding H, Shi Y, Jiao Q, Wang X (2006) J Appl Polym Sci 100:101310.1002/app.22926 ↗
42. Tanaka M, Takebayashi M, Shimomura M (2009) Macromol Symp 279:17510.1002/masy.200950527 ↗
43. Yabu H, Shimomura M (2006) Langmuir 22:499210.1021/la053486b ↗