Effect of the microstructure on the mechanical properties of a directionally solidified Y3Al5O12/Al2O3 eutectic fiber
Source abstract
Abstract
The strength and fracture behaviors of a directionally solidified Y3Al5O12/Al2O3 eutectic fiber were investigated. The fiber was grown continuously by an edge-defined film-fed growth (EFG) technique. The microstructure was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The room temperature tensile strength and Weibull's modulus of the eutectic fiber before and after heat treatment at 1460°C were measured. The fracture toughness and crack propagation behaviors were investigated using an indentation technique. Significant coarsening of the lamellar microstructure was observed after heat treatment at 1460°C in air. The degradation of the room temperature tensile strength in the Y3Al5O12/Al2O3 eutectic fiber after heat treatment was attributed to the development of surface grooves at the surface of the fiber. Also, the Y3Al5O12/Al2O3 eutectic fiber showed a radial (Palmqvist) crack type and exhibited an anisotropic crack propagation behavior during the indentation tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · High-Temperature Coating Behaviors · Fluid Dynamics and Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. S. A. Newcomb and R. E. Tressler, J. Amer. Ceram. Soc. 76(10) (1993) 2505.10.1111/j.1151-2916.1993.tb03973.x ↗
2. J. E. Sheehan, J. Sigalovsky, J. S. Haggerty and J. R. Porter, Ceram. Eng. Sci. Proc. 14(7/8) (1993) 660.10.1002/9780470314180.ch91 ↗
3. K. J. McClellan, H. Sayir, A. H. Heuer, A. Sayir, J. Haggerty and J. Sigalovsky, ibid. 14(7/8) (1993) 651.10.1002/9780470314180.ch90 ↗
4. G. S. Corman, in 94th Annual Meeting of the American Ceramic Society, Minneapolis, MN, April 12-16, 1992.
5. S. C. Farmer, A. Sayir and P. O. Dickerson, in In Situ Composites: Science and Technology (The Metallurgical Society, Warrendale, PA, 1993) p. 167.
6. E. L. Courtright, J. S. Haggerty and J. Sigalovsky, Ceram. Eng. Sci. Proc. 14(7/8) (1993) 671.10.1002/9780470314180.ch92 ↗
7. H. E. Bates, ibid. 13(7/8) (1992) 190.
8. T. Mah, T. A. Parthasarathy and M. D. Petry, ibid. 14(7/8) (1993) 622.10.1002/9780470314180.ch88 ↗
9. J.-M. Yang, S. M. Jeng and S. Chang, J. Amer. Ceram. Soc. 79(5) (1996) 1218.10.1111/j.1151-2916.1996.tb08575.x ↗
10. S. C. Farmer, A. Sayir, P. O. Dickerson and S. L. Draper, in 19th Annual Conference on Composites, Advanced Ceramics, Materials and Structures, Ceram. Eng. Sci. Proc., Vol. 16, No. 5, 969 (1995).
11. B. Lawn and R. Wilshaw, J. Mater. Sci. 10 (1975) 1049.10.1007/BF00823224 ↗
12. B. Lawn, “Fracture of Brittle Solids” (Cambridge University Press, Cambridge, U.K., 1993) Ch. 8.10.1017/CBO9780511623127 ↗
13. D. Tabor, “Hardness of Metals” (Clarendon, Oxford, U.K., 1951).
14. H. E. Labelle, Jr., Mat. Res. Bull. 6 (1971) 581.10.1016/0025-5408(71)90007-9 ↗
15. T. Mah, T. A. Parthasarathy and L. E. Matson, Ceram. Eng. Sci. Proc. 11(9/10) (1990) 1617.10.1002/9780470313053.ch36 ↗
16. E. E. Underwood, “Quantitative Stereology” (Addison-Wesley, Massachusetts, 1970).
17. L. E. Matson and N. Hecht, J. Euro. Ceram. Soc. 19 (1999) 2487.10.1016/S0955-2219(99)00125-9 ↗
18. L. D. Graham and R. W. Kraft, Trans. Met. Soc. AIME 236 (1966) 94.
19. A. J. Ardell, in “Computer-Aided Design of High-Temperature Materials,” edited by Alexander Pechenik et al. (Oxford University Press, Oxford, 1999) p. 163.10.1093/oso/9780195120509.003.0013 ↗
20. D.-Y. Park, J.-M. Yang and J. M. Collins J. Amer. Ceram. Soc., in press.
21. S. Nourbakhsh, W. H. Rhee, O. Sahin and H. Margolin, Metall. Mater. Trans. A 25A (1994) 1259.10.1007/BF02652300 ↗
22. R. L. Crane and R. E. Tressler, J. Comp. Mater. 5 (1971) 537.10.1177/002199837100500413 ↗
23. J.-M. Yang and X. Q. Zhu, Scrip. Mater. 36(9) (1997) 961.10.1016/S1359-6462(96)00472-1 ↗
24. K.-N. Tu, J. W. Mayer and L. C.Feldman, “Electronic Thin Film Science for Electrical Engineers and Materials Scientists” (Macmillan, New York, 1992).
25. J. Askill, “Tracer Diffusion Data for Metals, Alloys and Simple Oxides” (IFI/Plenum, New York, 1970).10.1007/978-1-4684-6075-9 ↗
26. W. W. Mullins, J. Appl. Phys. 28 (1957) 333.10.1063/1.1722742 ↗
27. Idem., Trans. Met. Soc. AIME 218 (1960) 354.
28. A. Tsoga and P. Nikolopoulos, J. Amer. Ceram. Soc. 77(4) (1994) 954.10.1111/j.1151-2916.1994.tb07252.x ↗
29. A. Tsoga, D. Sotiropoulou and P. Nikolopoulos, Mater. Sci. Forum 207-209 (1996) 565.10.4028/www.scientific.net/MSF.207-209.565 ↗
30. M. Jin, E. Shimada and Y. Ikuma, J. Mater. Res. 14(6) (1999) 2548.10.1557/JMR.1999.0341 ↗
31. G. De With and J. E. D. Parren, Solid State Ionics 16 (1985) 87.10.1016/0167-2738(85)90028-1 ↗
32. D. J. Clinton and R. Morrell, Brit. Ceram. Proc. 34 (1984) 113.
33. D. K. Shetty, A. R. Rosenfield and W. H. Duckworth, J. Amer. Ceram. Soc. 68(10) (1985) C-282.
34. H. E. Exner, Trans. Met. Soc. AIME 245 (1969) 677.
35. J. Echigoya, Y. Takabayashi and H. Suto, J. Mater. Sci. Lett. 5 (1986) 153.10.1007/BF01672030 ↗
36. K. Niihara, ibid. 2 (1983) 221.10.1007/BF00725625 ↗
37. K. Niihara, R. Morena and D. P. H. Hasselman, ibid. 1 (1982) 13.10.1007/BF00724706 ↗
38. R. W. Davidge, “Mechanical Behaviour of Ceramics” Cambridge Solid State Science Series (Cambridge University Press, Cambridge, 1980) p. 24.
39. G. De With, J. Mater. Sci. 19 (1984) 2195.10.1007/BF01058095 ↗