Tape casting of AlN/glass composites for LTCC substrate
Source abstract
Abstract
AlN/glass composite is low-fired substrate material for microelectronic packaging material. In this work, AlN/glass sheets were prepared by tape casting process. The dispersion, stabilization and the rheological properties of the slurry were studied. The optimum drying condition and mechanisms of debinding were also investigated. The results showed that powder size influenced the optimum content of dispersant and the viscosity of slurry. The slurry for tape casting exhibited a typical shear-thinning behavior. Smooth green tape without cracking was acquired after it was dried at solvent atmosphere. The binder was fully burned out at 600°C at low heating speed. The lamination with uniform microstructure was achieved by hot-pressed at 900°C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Engineering Applied Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. W. A. Vitriol and J. I. Steinberg, Int. J. hybrid Microelectron. 6 (1983) 593.
2. Yuzo Shimada, Kazuaki Utsumi, M. Suauki, Hideo Takamizawa, Mitsuru Nitta and Toshihiko Watari, IEEE. Tran. Comp. Hybrid Manu. CHMT-6 (1983) 382.10.1109/TCHMT.1983.1136194 ↗
3. Yuzo Shimada, Yoshinibu Kobayshi, Keiichiro Kata, Masayuki Kurano and Hideo Takamizawa, ibid. 13 (1990) 751.10.1109/33.62589 ↗
4. Rao R. Tummala and S. Ahmed, ibid. 15 (1992) 426.10.1109/33.159869 ↗
5. Yuzo Shimada, Yoshiharu Yamashita and Hideo Takamizawa, ibid. 11 (1988) 163.10.1109/33.2981 ↗
6. L. M. Sheppard, Amer. Ceram. Soc. Bull. 69 (1990) 1801.
7. T. Chartier, E. Streicher and P. Boch, J. Eur. Ceram. Soc. 9 (1992) 231.10.1016/0955-2219(92)90009-3 ↗
8. Howard T. Sawhill, Ceram. Eng. Sci. Proc. 9 (1988) 1603.
9. Guillermo Terrones, P. A. Smith, T. R. Armstrong and T. J. soltersz, J. Amer. Ceram. Soc. 80 (1997) 3151.10.1111/j.1151-2916.1997.tb03244.x ↗
10. D. J. Kim, M. H. Lee and C. E. Kim, ibid. 82 (1999) 3167.10.1111/j.1151-2916.1999.tb02219.x ↗
11. R. E. Mistler, D. J. Shanefield and R. B. Runk, “Ceramics Processing Before Firing” (Wiley, New York, 1978) p. 411.
12. F. M. Fowkes, “Advance in Ceramics, Ceramic Powder Science,” Vol. 21 (American Ceramic Society, Westerville, OH, 1989) p. 411.
13. R. C. Chiu, T. J. Garino and M. J. Chima, J. Amer. Ceram. Soc. 76 (1993) 2257.10.1111/j.1151-2916.1993.tb07762.x ↗
14. J. A. Lewis, K. A. Blackman, A. L. Ogden, J. A. Payne and L. F. Francis, ibid. 79 (1996) 3225.10.1111/j.1151-2916.1996.tb08099.x ↗