Properties of Ni/YSZ porous cermets prepared by electroless coating technique for SOFC anode application
Source abstract
Abstract
A conceptual nickel–yttria stabilized zirconia (Ni/YSZ) cermet has been prepared by coating YSZ particles with metallic nickel using electroless coating technique. Concentration of nickel was varied between 5 and 60 vol%. Bulk samples were prepared by uniaxial pressing followed by sintering in the temperature range 1,200–1,350 °C with a soaking time of 2–6 h. Thorough investigation on the electrical characteristics, thermal expansion behavior of the samples have been performed as a function of Ni-content in the cermet. Thermal expansion behavior and conductivity measurement results suggest that the samples prepared by this technique are suitable for solid oxide fuel cell (SOFC) anode application at Ni concentration as low as 20 vol%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrical and Thermal Properties of Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Minh NQ (1993) J Am Ceram Soc 76:56310.1111/j.1151-2916.1993.tb03645.x ↗
2. Badwal SPS, Foger K (1996) Ceram Int 22:25710.1016/0272-8842(95)00101-8 ↗
3. Minh NQ, Takahashi T (1995) Science and technology of ceramic fuel cells. Elsevier, New York
4. Dees DE, Claar TD, Easler TE, Fee DC, Mrazek FC (1987) J Electrochem Soc 134:214110.1149/1.2100839 ↗
5. Mizusaki J, Tsuchiya S, Waragai K, Tagawa H, Yoshihidi A, Kuwayama Y (1996) J Am Ceram Soc 79:10910.1111/j.1151-2916.1996.tb07887.x ↗
6. Maggio G, Ielo I, Antonucci V, Giordano N (1991) In: Grosz F, Zegers P, Singhal SC, Yamamoto O (eds) Solid oxide fuel cells II. The Commission of the European Communities, Luxembourg, pp 611–620
7. Pike GE, Seager CH (1997) J Appl Phys 48:515210.1063/1.323595 ↗
8. Marinsek M, Zupan K, Macek J (2000) J Power Sources 86:38310.1016/S0378-7753(99)00425-5 ↗
9. Li Y, Xie Y, Gong J, Chen Y, Zhang Z (2001) Mat Sci Eng B 86:11910.1016/S0921-5107(01)00683-3 ↗
10. Aruna ST, Muthuraman M, Patil KC (1998) Solid State Ionics 111:4510.1016/S0167-2738(98)00187-8 ↗
11. Pratihar SK, Das Sharma A, Basu RN, Maiti HS (2004) J Power Sources 129:13810.1016/j.jpowsour.2003.11.023 ↗
12. Pratihar SK, Das Sharma A, Maiti HS (2005) Mater Res Bull 40:193610.1016/j.materresbull.2005.06.002 ↗
13. Pratihar SK, Basu RN, Das Sharma A, Maiti HS (2001) Indian Patent, No. 306/DEL/01 dated. 19.03.01
14. Radovic M, Lara-Curzio E (2004) Acta Mater 52:574710.1016/j.actamat.2004.08.023 ↗
15. Takagi H, Kobayashi S, Shiratori A, Nishida K, Sakabe Y (1991) In: Grosz F, Zegers P, Singhal SC, Yamamoto O (eds) Proceedings of 2nd international symposium on SOFCs. Commission of the European Communities, pp 99
16. Kerner EH (1956) Proc Phys Soc Lond Ser B 69:80810.1088/0370-1301/69/8/305 ↗
17. Ringuede A, Labrincha JA, Frade JR (2001) Solid State Ionics 141–142:54910.1016/S0167-2738(01)00744-5 ↗
18. Mori M, Yamamoto T, Itoh H, Inaba H, Tagawa H (1998) J Electrochem Soc 145:137410.1149/1.1838468 ↗
19. Kagawa Y, Hatta H (1990) Tailoring ceramic composites. Agune-Shofu-sha, Tokyo
20. Spriggs RM (1961) J Am Ceram Soc 44:62810.1111/j.1151-2916.1961.tb11671.x ↗
21. Banerji A, Rohatgi PK, Reif W (1984) Metall 38:656
22. Okumura K, Yamamoto Y, Fuki T, Hanyu S, Kubo Y, Esaki Y, Hattori M, Kusunoki A, Takeuchi S (1993) In: Singhal SC, Iwahara H (eds) Proceedings of the third international symposium on solid oxide fuel cells. Electrochemical Society, Pennington, NJ, p 444