journal article·2008-06

Effect of anorthite and diopside on dielectric properties of Al2O3/glass composite based on high strength of LTCC substrate

Jinho Kim, Seongjin Hwang, Wookyung Sung, Hyungsun Kim

Journal of Materials Science· Volume 43· Issue 12
Publisher page

Abstract

The green sheet of an alumina filler/glass matrix, which is a glass–ceramic based on an anorthite and diopside composite, is a low-fired substrate material for microelectronic packaging. In this study, alumina/glass sheets were prepared using a tape-casting process. The mechanical and dielectric properties of the sintered bodies were examined as a function of the sintering temperature. The volume of the crystalline phases was considered with the peak area of the XRD intensity for evaluating the alumina/glass composite. The flexural strength and dielectric properties of the sintered alumina/glass composites were 167.2 ± 13.1 MPa for the four-point bending test, 5.51 for the dielectric constant and 2,078 MHz for the quality factor, respectively. The dielectric constant was dependent on the volume of crystalline phases present.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Electrical and Thermal Properties of Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Tummala RR (1991) J Am Ceram Soc 74:89510.1111/j.1151-2916.1991.tb04320.x ↗
2. Sprague JL (1990) IEEE Trans Comp Hybrids Manuf Technol 13:39010.1109/33.56173 ↗
3. Hwang S, Kim H (2007) Thermochim Acta 455:11910.1016/j.tca.2006.11.016 ↗
4. Hwang SJ, Kim YJ, Kim HS (2007) J Electroceram 18:12110.1007/s10832-007-9014-9 ↗
5. Lo CL, Duh JG (2003) J Mater Sci 38:693. doi:https://doi.org/10.1023/A:102183632608910.1023/A:1021836326089 ↗
6. Lo CL, Duh JG (2002) J Am Ceram Soc 85:223010.1111/j.1151-2916.2002.tb00440.x ↗
7. Shimada Y, Yamashita Y, Takamizawa H (1988) IEEE Trans Comp Hybrids Manuf Technol 11:16310.1109/33.2981 ↗
8. Marques VMF, Tulyaganov DU, Agathopoulos S, Gataullin VK, Kothiyal GP, Ferreira JMF (2006) J Eur Ceram Soc 26:250310.1016/j.jeurceramsoc.2005.07.055 ↗
9. Zhang Q, Luo X, Li W, Zhuang H, Yan D (2003) J Mater Sci 38:1781. doi:https://doi.org/10.1023/A:102329211354710.1023/A:1023292113547 ↗
10. Hayashi K, Nishoka Y, Okamto Y (1990) J Ceram Soc Jpn 95:80110.2109/jcersj.98.801 ↗
11. Karamanov A, Arrizza L, Matekovits I, Pelino M (2004) Ceram Int 30:212910.1016/j.ceramint.2003.11.019 ↗
12. Chen GH, Liu XY (2007) J Mater Process Technol 190:7710.1016/j.jmatprotec.2007.03.106 ↗
13. Kim J, Hwang S, Kim H (in press) J Electroceram. doi:https://doi.org/10.1007/s10832-007-9395-910.1007/s10832-007-9395-9 ↗
14. Kim HS, Rawlings RD, Rogers PS (1989) Br Ceram Proc 42:59
15. Kingery WD, Bowen HK, Uhlman DR (1976) Introduction to ceramics. Wiley, New York, p 793
16. Rice RW (1998) Porosity of ceramics. Marcel Dekker, Inc., New York, p 10
17. Gdula RA (1971) Ceram Bull 50:555
18. MatWeb, Material Property Data, (Automation Creations, Inc., 1996) (https://doi.org/www.matweb.com)
19. Molla J, Gonzalez M, Vila R, Ibarra A (1998) J Appl Phys 85:172710.1063/1.369317 ↗
20. Valant M, Suvorov D (2003) Mater Chem Phys 79:10410.1016/S0254-0584(02)00248-1 ↗
21. Penn SJ, Aiford NM, Templeton A, Wang X, Xu M, Reece M, Schrapel K (1997) J Am Ceram Soc 80:188510.1111/j.1151-2916.1997.tb03066.x ↗