Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under lubricated sliding conditions
Source abstract
Abstract
The friction and wear characteristics of three-dimensional (3D) braided carbon fiber-epoxy (C3D/EP) composites under lubricated sliding conditions against a quenched medium-carbon steel counterface were studied. Wear tests were performed under different loads at two velocities. Comparative wear tests under dry conditions were carried out to investigate the influence of lubrication. Tribological properties of the C3D/EP composites with various fiber loadings and two different fiber-matrix adhesion strengths were assessed. It was found that the lubricated contact promoted lower wear rates and friction coefficients. Compared to dry sliding, the tribological performance of the C3D/EP composites under lubrication was less dependent on fiber content, fiber-matrix bonding, load, and velocity than dry sliding. The worn surfaces of the C3D/EP composites were analyzed by scanning electron microscopy (SEM) to explore the relevant mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Mechanical stress and fatigue analysis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. J. S. BRADLEY, G. W. HASTINGS and C. JOHNSON-NURSE, Biomaterials 1 (1980) 38.10.1016/0142-9612(80)90057-5 ↗
2. C. MIGLIARESI, F. NICOLI, S. ROSSI and A. PEGORETTI, Compos. Sci. Technol. 64 (2004) 873.10.1016/j.compscitech.2003.09.003 ↗
3. J. KETTUNEN, E. A. MA KELA, H. MIETTINEN, T. NEVALAINEN, M. HEIKKILA, T. POHJONEN, P. TORMALA and P. ROKKANEN, Biomaterials 19 (1998) 1219.10.1016/S0142-9612(98)00027-1 ↗
4. J. PAULO DAVIM, N. MARQUES and A. M. BAPTISTA, Wear 251 (2001) 1100.10.1016/S0043-1648(01)00741-4 ↗
5. R. S. J. KENNETH and K. T. TSAO, in, Encyclopedic Handbook of Biomaterials and Bioengineering, Part A: Materials, Vol. 2, edited by D. L. Wise et al. (Marcel Dekker, New York, 1995), p. 1817.
6. D. W. MURRAY and N. RUSHTON, J. Bone Joint Surgery 72B (1990) 988.10.1302/0301-620X.72B6.2246303 ↗
7. D. W. HOWIE, B. VERNON-ROBERTS, R. OAKESHOTT and B. MATHEY, ibid. 70A (1988) 257.10.2106/00004623-198870020-00015 ↗
8. D. W. LENNOX, B. H. SCHOFIELD, D. F. MCDONALD and L. H. RILEY, Orthapaedics Relat. Res. 225 (1987) 171.
9. K. FRIEDRICH, Z. LU and A. M. HAGER, Theoretical Applied Fracture Mechanics 19 (1993) 1.10.1016/0167-8442(93)90029-B ↗
10. C. P. TURSSI, B. M PURQUERIO and M. C. SERRA, J. Biomed. Mater. Res. Part B: Appl. Biomater. 65B (2003) 280.10.1002/jbm.b.10563 ↗
11. B. VISHWAMATH, A. P. VERMA and C. V. S. KAMESWARA RAE, Wear 145 (1991) 315.10.1016/0043-1648(91)90139-L ↗
12. J. BIJWE, J. INDUMATHI and A. K. GHOSHB, ibid. 253 (2002) 803.10.1016/S0043-1648(02)00167-9 ↗
13. B. VISHWANATH, A. P. VERMA and C. V. S. RAO, ibid. 167 (1993) 93.10.1016/0043-1648(93)90313-B ↗
14. Y. Z. WAN, Y. L. WANG, G. X. CHENG and K. Y. HAN, J. Appl. Polym. Sci. 85 (2002) 1031.10.1002/app.10495 ↗
15. Y. Z. WAN, Y. L. WANG, H. L. LUO and J. G. QI, ibid. 80 (2001) 367.10.1002/1097-4628(20010418)80:3<367::AID-APP1108>3.0.CO;2-U ↗
16. Y. Z. WAN, Y. L. WANG, F. G. ZHOU, G. X. CHENG and K. Y. HAN, ibid. 85 (2002) 1040.10.1002/app.10496 ↗
17. O. JACOBS, R. JASKULKA, F. YANG and W. WU, Wear 256 (2004) 9.10.1016/S0043-1648(03)00196-0 ↗
18. J. K. LANCASTER, ibid. 20 (1972) 315.10.1016/0043-1648(72)90413-9 ↗
19. N. S. EL-TAYEB and R. M. GADELRAB, ibid. 192 (1996) 112.10.1016/0043-1648(95)06770-1 ↗
20. Y. YAMAMOTO and M. HASHIMOTO, ibid. 253 (2002) 820.10.1016/S0043-1648(02)00059-5 ↗
21. Idem, ibid. 257 (2004) 181.10.1016/j.wear.2003.12.004 ↗
22. J. FISHER, D. DOWSON, H. HAMDZAH and H.L. LEE, ibid. 175 (1994) 219.10.1016/0043-1648(94)90185-6 ↗
23. R. ZHANG, A. M. HAEGER, K. FRIEDRICH, Q. SONG and Q. DONG, ibid. 181–183 (1995) 613.10.1016/0043-1648(95)90177-9 ↗
24. K. FRIEDRICH, Z. LIU and A. M. HAGER, ibid. 190 (1995) 139.10.1016/0043-1648(96)80012-3 ↗
25. H. ZHANG and Z. ZHANG, Compos. Sci. Technol. 64 (2004) 2031.10.1016/j.compscitech.2004.02.010 ↗