Monitoring of cure kinetic prepreg and cure cycle modeling
Source abstract
Abstract
Cure kinetic model is an integral part of composite process simulation, which is used to predict the degree of curing and the amount of the generated heat. The parameters involved in kinetic models are usually determined empirically from isothermal or dynamic differential scanning calorimetry (DSC) data. In this work, DSC and rheological techniques were used to investigate some of the kinetic parameters of cure reactions of carbon/F161 epoxy prepreg and to evaluate the cure cycle used to manufacture polymeric composites for aeronautical applications. As a result, it was observed that the F161 prepreg presents cure kinetic with total order 1.2–1.9.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Thermal and Kinetic Analysis · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. B. Z. JANG, in “Advanced Polymer Composites: Principles and Applications” (ASM International, USA, 1994).
2. S. T. PETERS, in “Handbook of Composites” (Chapman and Hall, London, 1998).10.1007/978-1-4615-6389-1 ↗
3. D. D. SHIN and H. T. HAHN, Composites Part A: Applied and Manufacturing 31 (2000) 991.10.1016/S1359-835X(00)00011-7 ↗
4. B. ELLIS, in “Chemistry and Technology of Epoxy resins” (Chapman and Hall, London, 1993).10.1007/978-94-011-2932-9 ↗
5. M. L. COSTA, J. M. F. PAIVA, E. C. BOTELHO and M. C. REZENDE, Mat. Res. 8 (2005), 317.10.1590/S1516-14392005000300016 ↗
6. M. L. COSTA, L. C. PARDINI and M. C. REZENDE, Materials Research 8 (2005) 65.10.1590/S1516-14392005000100012 ↗
7. E. C. BOTELHO, M. C. REZENDE and N. SCHERBAKOFF, Poly. Inter. 51 (2002) 1261.10.1002/pi.1064 ↗
8. E. C. BOTELHO, C. L. NOGUEIRA and M. C. REZENDE, J Appl. Polym. Sci. 86 (2002) 3114.10.1002/app.11335 ↗
9. R. E. S. BRETAS and M. A. D’AVILA, “Reologia de Polímeros Fundidos” (USP Publications, São Carlos University, São Paulo, Brazil, 2000) (in portuguese).
10. E. C. BOTELHO, M. C. REZENDE and N. SCHERBAKOFF, Mater. Res. 3 (2000) 19.10.1590/S1516-14392000000200004 ↗
11. M. L. COSTA, J. M. F. PAIVA, E. C. BOTELHO and M. C. REZENDE, Polímeros Ciênciae Tecnologia 13 (2003) 188 (in portuguese).10.1590/S0104-14282003000300009 ↗
12. C. L. LEE and K. H. WEI, J Appl. Polym. Sci. 77 (2000) 2149.10.1002/1097-4628(20000906)77:10<2149::AID-APP7>3.0.CO;2-J ↗
13. R. PHILLIPS, T. GLAUSER AND J. A. E. MANSON, Poly. Comp. 18 (1997) 500.10.1002/pc.10302 ↗
14. M. L. COSTA, L. C. PARDINI and M. C. REZENDE, J Mater. Sci. 40 (2005), 3615.10.1007/s10853-005-0760-2 ↗
15. J. MALEK, Thermochim. Acta 200 (1992) 257.10.1016/0040-6031(92)85118-F ↗
16. S. MONTSERRAT, C. FLAQUE, P. PAGES and J. MALEK, J Appl. Polym. Sci. 56 (1995) 1413.10.1002/app.1995.070561104 ↗
17. M. L. COSTA. MSc Thesis, Establishing of process parameters of structural composites by thermal and viscosimetric analyses, Instituto Tecnológico de Aeronáutica, São José dos Campos, Brazil (in portuguese) (1998).
18. M. L. COSTA, J. M. F. PAIVA, E. C. BOTELHO and M. C. REZENDE, in Proceedings of the XVII Congresso Brasileiro de Engenharia Mecânica, COBEM, São Paulo, Brazil, 2003.
19. M. L. COSTA, M. C. REZENDE and S. F. M. ALMEIDA, Comp. Sci. Tech. 61 (2001) 2101.10.1016/S0266-3538(01)00157-9 ↗
20. https://doi.org/www.hexcelcomposites.com
21. J. M. LAZA, C. A. JULIAN, E. LARRAURI, M. RODRIGUEZ and L. M. LEON, Polym. 40 (1998) 35.10.1016/S0032-3861(98)00217-1 ↗
22. C. D. WINGARD, Thermochim. Acta 357–358 (2000) 293.10.1016/S0040-6031(00)00400-7 ↗
23. B. S. HAYES, E. N. GILBERT and J. C. SEFERIS, Comp.: Part A 31 (2000) 717.10.1016/S1359-835X(00)00012-9 ↗
24. Y. HE, Thermochim. Acta 367–368 (2001) 101.10.1016/S0040-6031(00)00654-7 ↗
25. C. N. CASCAVAL, D. ROSU and F. MUSTATA, Thermochim. Acta 370 (2001) 105.10.1016/S0040-6031(00)00787-5 ↗