Structural, mechanical, and tribological properties of AISI 304 and AISI 316L steels submitted to nitrogen–carbon glow discharge
Source abstract
Abstract
Glow discharge (GD) nitrocarburizing, at low-carbon content and different working temperatures, was performed on AISI 316L and AISI 304 stainless steels. Structural compositions were studied by X-ray diffraction. Instrumented indentation and conventional Vickers method allowed hardness profiles to be determined. Tribological behavior was studied by means of reciprocating sliding and nanoscratch tests. After nitrocarburizing, both steels showed similar embedded nitride and carbide formations. The layer formed by GD in nitrogen–carbon atmosphere is thicker than those consisting solely of nitrogen particularly for AISI 316L. At working temperatures higher than 400 °C, roughness increased and wear was limited to asperity compaction. Wear mechanisms were similar in both steels. However, wear was reduced by up to a factor of 5 in treated steels. No difference in elastic surface recovery was observed after nitrocarburizing in either steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Jones AM, Bull SJ (1996) Surf Coat Technol 83:26910.1016/0257-8972(95)02797-1 ↗
2. Blawert C, Weisheit A, Mordike BL, Knoop FM (1996) Surf Coat Technol 85:1510.1016/0257-8972(96)02880-0 ↗
3. Larisch B, Brusky U, Spies HJ (1999) Surf Coat Technol 116–119:20510.1016/S0257-8972(99)00084-5 ↗
4. Blawert C, Mordike BL, Collins GA, Short KT, Jirásková Y, Schneeweiss O, Perina V (2000) Surf Coat Technol 128–129:21910.1016/S0257-8972(00)00651-4 ↗
5. Hanninen H, Romu J, Ilola R, Tervo J, Laitinen A (2001) J Mater Process Technol 117:42410.1016/S0924-0136(01)00804-4 ↗
6. Tsujikawa M, Yamauchi N, Ueda N, Sone T, Hirose Y (2005) Surf Coat Technol 193:30910.1016/j.surfcoat.2004.08.179 ↗
7. Sun Y (2005) J Mater Process Technol 168:18910.1016/j.jmatprotec.2004.10.005 ↗
8. Foerster CE, Serbena FC, da Silva SLR, Lepienski CM, Siqueira CJM, Ueda M (2007) Nucl Instrum Methods Phys Res B 257:73210.1016/j.nimb.2007.01.266 ↗
9. Foerster CE, Souza JFP, Silva CA, Ueda M, Kuromoto NK, Serbena FC, Silva SLR, Lepienski CM (2007) Nucl Instrum Methods Phys Res B 257:72710.1016/j.nimb.2007.01.267 ↗
10. Oddershede J, Christiansen TL, Stahl K, Somers MAJ (2008) J Mater Sci 43:5358. doi: https://doi.org/10.1007/s10853-008-2791-y10.1007/s10853-008-2791-y ↗
11. da Silva LLG, Ueda M, Mello CB, Codaro EN, Lepienski CM (2008) J Mater Sci 43:5989. doi: https://doi.org/10.1007/s10853-008-2768-x10.1007/s10853-008-2768-x ↗
12. Paternoster C, Fabrizi A, Cecchini R, El Mehtedi M, Choquet P (2008) J Mater Sci 43:3377. doi: https://doi.org/10.1007/s10853-007-2392-110.1007/s10853-007-2392-1 ↗
13. Li CX, Dong H, Bell T (2006) J Mater Sci 41:6116. doi: https://doi.org/10.1007/s10853-006-0484-y10.1007/s10853-006-0484-y ↗
14. Dasgupta A, Kuppusami P, Vijayalakshmi M, Raghunathan VS (2007) J Mater Sci 42:8447. doi: https://doi.org/10.1007/s10853-007-1783-710.1007/s10853-007-1783-7 ↗
15. Chen FS, Chang CN (2003) Surf Coat Technol 173:910.1016/S0257-8972(02)00842-3 ↗
16. Sun Y (2005) Mater Sci Eng A 404:12410.1016/j.msea.2005.05.061 ↗
17. Sun Y, Haruman E (2006) Vacuum 81:11410.1016/j.vacuum.2006.03.003 ↗
18. Tsujikawa M, Yoshida D, Yamauchi N, Ueda N, Sone T, Tanaka S (2005) Surf Coat Technol 200:50710.1016/j.surfcoat.2005.02.051 ↗
19. Abd El-Rahamn AM, El-Hossary FM, Negm NZ, Prokert F, Richter E, Moeller W (2004) Nucl Instrum Methods Phys Res B 226:49910.1016/j.nimb.2004.07.006 ↗
20. Abd El-Rahamn AM, El-Hossary FM, Fitz T, Negm NZ, Prokert F, Pham MT, Richter E, Moeller W (2004) Surf Coat Technol 183:26810.1016/j.surfcoat.2003.09.057 ↗
21. Jenkins R, Fawcet TG, Smith DK, Visser JW, Morris MC, Frevel LK (1986) Powder Diffr 1:5110.1017/S0885715600011581 ↗
22. Rietveld HM (1967) Acta Crystallogr 22:15110.1107/S0365110X67000234 ↗
23. Wiles DB, Young RA (1981) J Appl Crystallogr 14:14910.1107/S0021889881008996 ↗
24. Carvajal JR (2000) An introduction to the program FullProf. Lab Leon Brillouin, Saclay
25. Oliver WC, Pharr GM (1992) J Mater Res 7:156410.1557/JMR.1992.1564 ↗
26. Blawert C, Kalvelage H, Mordike BL, Collins GA, Short KT, Jirásková Y, Schneeweiss O (2001) Surf Coat Technol 136:18110.1016/S0257-8972(00)01050-1 ↗
27. Fewell MP, Priest JM (2008) Surf Coat Technol 202:180210.1016/j.surfcoat.2007.07.062 ↗
28. Czerwiec T, Renevier N, Michel H (2000) Surf Coat Technol 131:26710.1016/S0257-8972(00)00792-1 ↗
29. Baranowska J, Franklin SE, Pelletier CGN (2005) Wear 259:43210.1016/j.wear.2005.02.002 ↗
30. Williamson DL, Davis JA, Wilbur PJ (1998) Surf Coat Technol 103–104:17810.1016/S0257-8972(98)00389-2 ↗
31. Parascandola S, Moeller W, Willianson DL (2000) Appl Phys Lett 67:219410.1063/1.126294 ↗
32. de Souza GB, Foerster CE, Silva SLR, Lepienski CM (2006) Mater Res 9:15910.1590/S1516-14392006000200009 ↗
33. Alves C, Rodrigues JA (2000) Mat Sci Eng A 279:1010.1016/S0921-5093(99)00692-9 ↗
34. Saha R, Nix WD (2002) Acta Mater 5023:2310.1016/S1359-6454(01)00328-7 ↗
35. Zum Garh K-H (1987) Microstructure and wear of materials tribology series, vol 10. Elsevier, Amsterdam
36. Bushan B, Grupta BK (1991) Handbook of tribology coatings and surfaces treatments. McGraw-Hill, New York