journal article·2007-05

Dissolution properties of some fly ash fillers applying to geopolymeric materials in alkali solution

Akira Mikuni, Ryuichi Komatsu, Ko Ikeda

Journal of Materials Science· Volume 42· Issue 9
Publisher page

Abstract

Dissolution properties of three kinds of fly ash including a Pressurized Fluidized Bed Combustion (PFBC) ash from a novel type of fluidized bed combustion boiler have been studied by leaching in different concentrations of caustic soda solution up to 15 N at 25 °C and 80 °C, stirring for 1 h with liquor/solid ratio = 10. Liquors sampled by a centrifugal separator were chemically analyzed by ICP technique. A blast furnace slag was also studied for reference. Results showed that Ca2+ dissolved relatively large amount in genuine water, but no marked dissolution was detected with increasing NaOH concentrations of the leaching solution. No enhanced dissolution of Al3+ was detected for ordinary fly ashes collected from pulverized coal combustion boilers even with increasing concentrations of solution at 25 °C, whereas enhanced dissolution of Al3+ was observed at 80 °C, when 5 N was reached and more. On the contrary, appreciable increasing was noted on the dissolution of Si4+ with increasing NaOH concentrations even at 25 °C for the ordinary fly ashes and the Si4+ dissolution became enhanced at 80 °C, specifically in 5 N and more.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Coal and Its By-products

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Devdovits J, http://www.geopolymer.org/, http://www.geopolymer.com, http://solve.csiro.au/0505/article10.htm, as on February 2006
2. Ikeda K (1998) J Mining Mater Process Inst Jpn 114:497
3. Van Jaarsveld JGS, Van Deventer JSJ, Lorenzen L (1996) Miner Eng 10:(7) 65910.1016/S0892-6875(97)00046-0 ↗
4. Van Jaarsveld JGS, Van Deventer JSJ, Schwartzman A, Lorenzen L (1999) Miner Eng 12:(1) 7510.1016/S0892-6875(98)00121-6 ↗
5. Phair JW, Van Deventer JSJ (2001) Miner Eng 14:(3) 28910.1016/S0892-6875(01)00002-4 ↗
6. Khalil MY, Merz E (1994) J Nuclear Mater 211:14110.1016/0022-3115(94)90364-6 ↗
7. Fernandez-Jimenez AM, Eric E, Lachowski A, Palomo A, Macphee DE (2004) Cement Concrete Comp 26:100110.1016/j.cemconcomp.2004.02.034 ↗
8. Van Jaarsveld JGS, Van Deventer JSJ (1999) Cement Concrete Res 29:118910.1016/S0008-8846(99)00032-0 ↗
9. Bankowski P, Zou L, Hodges R (2004) Miner Eng 17:15910.1016/j.mineng.2003.10.024 ↗
10. Bankowski P, Zou L, Hodges R (2004) J Hazard Mater B114:5910.1016/j.jhazmat.2004.06.034 ↗
11. Xu H, Van Deventer JSJ . Colloids and Surfaces A: Physicochem Eng Aspects, 216 (2003)10.1016/S0927-7757(02)00499-5 ↗
12. Xu H, Van Deventer JSJ (2000) Int J Miner Process 59:(3)24710.1016/S0301-7516(99)00074-5 ↗
13. Mikuni A, Wei C, Komatsu R, Ikeda K (2005) J Sci Inorg Mater, Japan 12:115
14. Mikuni A, Wei C, Komatsu R, Ikeda K (2005) J Sci Inorg Mater, Japan 12:191