A review of machining theory and tool wear with a view to developing micro and nano machining processes
Source abstract
Abstract
This paper reviews the current state-of-the-art surrounding macro scale machining; it discusses how these factors will influence the future development of micro and nano scale machining. The paper begins by reviewing machining theory, and then discusses high speed machining, tool wear, tool coatings, micromachining, meso machine tool design and future applications and research directions. Tool wear is a factor that determines the economy of the machining process. Therefore, an extensive part of the paper is devoted to the development of materials used to coat tools; in turn, it is anticipated these coatings will used in future micro machining applications. Consideration is also given to machine structures that are required to use these cutting tools at speeds in excess of one million revolutions per minute. This review provides a timely explanation of the literature surrounding the factors required for successful micro and nano machining.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (95)
Show source-provided references
1. Ernst H, Merchant ME (1941) Chip formation, friction and high quality machined surfaces, surface treatment of metals, vol 29, American Society of Metals. New York, p 229
2. Merchant M (1945) J Appl Phys 16(5):26710.1063/1.1707586 ↗
3. Merchant M (1945) J Appl Phys 16(6):31810.1063/1.1707596 ↗
4. Piispanen V (1937) Teknillinen Aiakauslehti 27(9):315
5. Shaw MC (2005) Metal Cutting Principles—2nd edition. Oxford Series on Advanced Manufacturing, Oxford University Press
6. Merchant M, Zlatin N (1945) Mech Eng 67(11):737–742
7. Stabler GV (1951) Inst Mech Eng-Proce 165(63):1410.1243/PIME_PROC_1951_165_008_02 ↗
8. Lee EH, Shaffer BW (1951) J Appl Mech 73:40510.1115/1.4010357 ↗
9. Oxley PLB (1961) Int J Mech Sci 3(1–2):6810.1016/0020-7403(61)90039-X ↗
10. Shaw MC (2003) The size effect in metal cutting. Proce Indian Acad Sci-Sadhana 28(5):87510.1007/BF02703319 ↗
11. Shaw MC, Jackson MJ (2005) The size effect of micromachining, published in ‘Microfabrication and Nanomanufacturing’. CRC Press (Taylor and Francis Publishers), Florida, USA
12. Schulz H (1997) State of the art of high speed machining. In: Molinari A, Dudzinski D, Schulz H (eds) High speed machining. University of Metz, France, p 1
13. Usui E, Hirota A, Masuko M (1978) J Eng Industry 100(2):22210.1115/1.3439413 ↗
14. Usui E, Hirota A (1978) J Eng Industry 100(2):22910.1115/1.3439414 ↗
15. Usui E, Shirakashi T, Kitagawa T (1978) J Eng Industry 100(2):23610.1115/1.3439415 ↗
16. Kitagawa T, Kubo A, Maekawa K, (1997) Wear 202(2):14210.1016/S0043-1648(96)07255-9 ↗
17. Ozel T, Altan T (2000) Int J Mach Tools Manu 40(5):71310.1016/S0890-6955(99)00080-2 ↗
18. Moufki A (1997) Modelling of orthogonal cutting. In: Molinari A, Dudzinski D, Schulz H (eds) High speed machining, vol 1. University of Metz, France, p 8
19. Bailey JA (1975) Wear 31(2):24310.1016/0043-1648(75)90161-1 ↗
20. Montgomery RS (1976) Wear 36(2):27510.1016/0043-1648(76)90108-3 ↗
21. Groover MP, Kane GE (1971) Trans ASME Ser B J Eng Industry 93(2):60310.1115/1.3427967 ↗
22. Wright PK, Trent EM (1973) J Iron Steel Inst (Lond) 211(5):364
23. Fourment L, Oudin A, Massoni E, Bittes G, Le Calvez C (1997) Numerical Simulation of Tool Wear in Orthogonal Cutting. High Speed Machining, vol 1. University of Metz, p 38
24. Kim KW, Sin HC (1996) Int J Mach Tools Manu 36(3):37910.1016/0890-6955(95)00054-2 ↗
25. Trent EM, Wright PK (2000) Metal cutting, 4th edn. Butterworth-Heinemann, Woburn, MA
26. Doyle ED, Horne JG, Tabor D (1979) Frictional interactions between chip and rake face in continuous chip formation. Proce Roy Soc Lond Ser A (Mathemat Phys Sci), 366(1725):17310.1098/rspa.1979.0046 ↗
27. Gekonde HO, Subramanian SV (1997) Influence of phase transformation on tool crater wear. In: Molinari A, Dudzinski D, Schulz H (eds) High speed machining, vol 1. University of Metz, France, p 49
28. Gygax PE (1980) Wear 62(1):16110.1016/0043-1648(80)90041-1 ↗
29. Rotberg J (1997) Cutting force prediction in high speed machining the fast evaluation approach. In: Molinari A, Dudzinski D, Schulz H (eds) High Speed Machining, vol 1. University of Metz, France, p 63
30. Schmitt IT (1997) High speed milling machines. In: Molinari A, Dudzinski D, Schulz H (eds) High Speed Machining, vol 1. University of Metz, France, p 75
31. Weck M, Staimer D (2002) CIRP Ann-Manu Technol 51(2):67110.1016/S0007-8506(07)61706-5 ↗
32. Ibaraki S, Okuda T, Kakino Y, Nakagawa M, Matsushita T, Ando T (2004) JSME Int J Ser C (Mech Syst Mach Elements Manu) 47(1):16010.1299/jsmec.47.160 ↗
33. Moller B (1997) High speed and precision—features of motorised spindles. In: Molinari A, Dudzinski D, Schulz H (eds) High speed machining, vol 1. University of Metz, France, p 116
34. Cohen G, Ronde U (1997) Use of spindles with hydrostatic bearings in the field of high speed cutting. In: Molinari A, Dudzinski D, Schulz H (eds) High speed machining, vol 1. University of Metz, France, p 129
35. Tansel IN, Arkan TT, Bao WY, Mahendrakar N, Shisler B, Smith D et al (2000) Int J Mach Tools Manu 40(4):59910.1016/S0890-6955(99)00073-5 ↗
36. Ingle SS, Subramanian SV, Kay DAR (1994) Micromechanisms of crater wear. Proceedings of the second conference on the behaviour of materials in machining. Institute of Mateirals, London, p 112
37. Bhattacharyya A, Ham I (1969) Analysis of Tool Wear Part 1: Theoretical Models of Flank Wear, ASME-Paper 68-WA/Prod-5, 910.1115/1.3427693 ↗
38. Bhattacharyya A, Ghosh A, Ham I (1969) Analysis of Tool Wear Part 2: Applications of Flank Wear Models, ASME-Paper 69-WA/Prod-8, 6
39. Subramanian SV, Ramanujachar K, Ingle SS (1989) Micromechanisms of tool wear in high speed machining of steel. Proceedings of the first conference on the behaviour of materials in machining. Institute of Materials, London, p 223
40. Naerheim Y, Trent EM (1977) Metal Technol 4(12):54810.1179/030716977803292673 ↗
41. Hastings WF, Mathew P, Oxley PL (1980) Machining theory for predicting chip geometry, cutting forces etc. from work material and cutting conditions. Proce Roy Soc Lond Ser A: Mathemat Phys Sci 371(1747):569
42. Boothroyd G (1961) Brit J Appl Phys 12(5):23810.1088/0508-3443/12/5/307 ↗
43. Sherby OD, Orr RL, Dorn JE (1954) J Metal 6(1):71
44. Sherby OD (1962) Acta Metall 10(2):13510.1016/0001-6160(62)90058-5 ↗
45. Gregory B (1970) Metallurgia 62(490):55
46. Suzuoka T (1961) Trans Jpn Inst Metal 2(1):2510.2320/matertrans1960.2.25 ↗
47. Trent EM (1952) Inst Mech Eng-Proce 166(1):6410.1243/PIME_PROC_1952_166_012_02 ↗
48. Danneberg W (1961) Metall 15(10):977
49. Nayak PN, Cook NH (1967) Evaluation of some models of thermally activated tool wear. Am Soc Mech Eng-Pap, 67-Prod-15, 11 Pages
50. Leymonie C, Lacombe P (1959) Memoires Scientifiques de la Revue de Metallurgie 56(1):74
51. Davies R (1957) A tentative model for the mechancial wear process, ASME Symposium on Friction and Wear, Detroit, USA
52. Faure C, Hanni W, Schmutz CJ, Gervanoni M (1999) Diam Relat Mater 8(2–5):636
53. Jackson MJ, Gill M, Sein H, Ahmed W (2003) Proce Inst Mech Eng Part L-J Mater 217:7710.1243/09544080360563007 ↗
54. Bell T (1992) J Phys D: Appl Phys 25(1A):A29710.1088/0022-3727/25/1A/045 ↗
55. Mills B (1996) J Mater Proce Technol 56(1–4):1610.1016/0924-0136(95)01816-6 ↗
56. Kubaschewski O, Alcock CB (1979) Metallurgical thermochemistry, 5th edn. Pergamon Press, Oxford
57. Klocke F, Krieg T (1999) CIRP Ann-Manu Technol 48(2):51510.1016/S0007-8506(07)63231-4 ↗
58. Quinto DT, Santhanam AT, Jindal PC (1989) Int J Refract Hard Metal 8(2):95
59. Munz WD, Smith IJ, Donohue LA, Deeming AP, Goodwin R (1997) TiAlN based PVD coatings tailored for dry cutting operations. Proceedings, Annual Technical Conference—Society of Vacuum Coaters. Albuquerque, NM, Society of Vacuum Coaters, p 83
60. Constable CP, Yarwood J, Munz WD (1999) Surf Coat Technol 116–119:15510.1016/S0257-8972(99)00072-9 ↗
61. Constable CP, Yarwood J, Hovsepian P, Donohue LA, Munz WD (2000) J Vac Sci Tech, Part A: Vac Surf Films 18(4 11):1681–168910.1116/1.582407 ↗
62. Deeming AP, Munz WD, Smith IJ (2001) Dry High Performance Machining (HPM) of Die and Moulds Using PVD Coated Solid Cemented Carbide Tools. Paper presented at the meeting of Sheffield P.V.D. Research Group
63. Creasey S, Lewis DB, Smith IJ, Munz WD (1997) Surf Coat Technol 97(1–3):16310.1016/S0257-8972(97)00137-0 ↗
64. Munz WD, Smith IJ, Lewis DB, Creasey S (1997) Vacuum 48(5):47310.1016/S0042-207X(96)00307-7 ↗
65. Gahlin R, Bromark M, Hedenqvist P, Hogmark S, Hakansson G (1995) Surf Coat Technol 76(1–3):17410.1016/0257-8972(95)02597-9 ↗
66. Wang DD, Oki T (1990) Thin Solid Films 185(2):21910.1016/0040-6090(90)90086-S ↗
67. Hurkmans T, Lewis DB, Brooks JS, Munz WD (1996) Surf Coat Technol 86–87(1–3):19210.1016/S0257-8972(96)02949-0 ↗
68. Wadsworth I, Smith IJ, Donohue LA, Munz WD (1997) Surf Coat Technol 94–95(1–3):31510.1016/S0257-8972(97)00353-8 ↗
69. Smith IJ, Gillbrand D, Brooks JS, Munz WD, Harvey S, Goodwin R (1997) Surf Coat Technol 90(1–2):16410.1016/S0257-8972(96)03113-1 ↗
70. Petrov I, Losbichler P, Bergstrom D, Greene JE, Munz WD, Hurkmans T et al (1997) Thin Solid Films 302(1–2):17910.1016/S0040-6090(96)09524-7 ↗
71. Salagean EE, Lewis DB, Brooks JS, Munz WD, Petrov I, Greene JE (1996) Surf Coat Technol 82(1–2):5710.1016/0257-8972(95)02639-8 ↗
72. Donohue LA, Smith IJ, Munz WD, Petrov I, Greene JE (1997) Surf Coat Technol 94–95(1–3):315
73. Inamura T, Takezawa N, Kumaki Y (1993) CIRP Ann 42(1):7910.1016/S0007-8506(07)62396-8 ↗
74. Kim JD, Moon CH (1996) Int J Adv Manu Technol 11(5):31910.1007/BF01845690 ↗
75. Gillespie LK (1979) Precis Eng 1(4):18910.1016/0141-6359(79)90099-0 ↗
76. Gilespie LK, Blotter PT (1973) J Eng Industry Trans ASME 98 Ser B(1):66
77. Kim JS (2000) Optimization and Control of Drilling Burr Formation in Metals (Doctoral dissertation, University of California at Berkeley). Dissertation Abstracts International, 62(01), (2000) 496B (UMI No. 3001895)
78. Ko SL, Dornfield DA (1988) Study Burr Format Mech 11:271
79. Lee K, Dornfeld DA (2002) Tech Pap-Soc Manu Eng MR(MR02–202):1
80. Ikawa N, Shimada S, Tanaka H (1992) Nanotechnology 3(1):610.1088/0957-4484/3/1/002 ↗
81. Yuan ZJ, Zhou M, Dong S (1996) J Mater Proce Technol 62(4):32710.1016/S0924-0136(96)02429-6 ↗
82. Kim CJ, Bono M, Ni J (2002) Tech Pap-Soc Manu Eng MR(MR02–159):1
83. Sutherland JW, Babin TS (1988) Proce NAMRC 16:202
84. Ikawa N, Shimada S, Tanaka H, Ohmori G (1991) CIRP Ann Manuf Technol 40(1):55110.1016/S0007-8506(07)62051-4 ↗
85. Mizumoto H, Arii S, Yoshimoto A, Shimizu T, Ikawa N (1996) CIRP Ann-Manu Technol 45(1):50110.1016/S0007-8506(07)63111-4 ↗
86. Shimada S, Ikawa N, Tanaka H, Ohmori G, Uchikoshi J (1993) Seimtsu Koaku Kaishi/J Jpn Soc Precis Eng 59(12):201510.2493/jjspe.59.2015 ↗
87. Shimada S (2002) Molecular dynamics simulation of the atomic processes in micromachining. In: McGeough J (ed) Micromachining of engineering materials. Marcel Deckker. New York
88. Shimada S, Inoue R, Uchikoshi J, Ikawa N (1995) Molecular dynamics analysis on microstructure of diamond turned surfaces. Proce SPIE- Int Soc Optical Eng 2576:396
89. Komanduri R, Chandrasekaran I, Raff LM (2001) Stat Mech Elect Optical Mag Proper 81(12):1989
90. Vogler MP, Liu X, Kapoor SG, DeVor RE, Ehmann KF (2002) Tech Pap-Soc Manu Eng MS(MS02–181):1
91. Popoli WF (1998) Tech Pap-Soc Manu Eng MR(MR98–146):23
92. Fredrickson P, Grimes D (2004) Syst Des 46(11):24
93. Zelinski P, Micro Milling at 1/2 Million RPM, Modern Machine Shop, 1 (2003) Retrieved 10 th March 2004, from www.mmsonline.com/articles/080306.html:
94. Frechette LG, Jacobson SA, Breuer KS, Ehrich FF, Ghodssi R, Khanna R et al (2000) Demonstration of a Microfabricated High-Speed Turbine Supported on Gas Bearings. Technical Digest. Solid-State Sensor and Actuator Workshop, TRF Cat No. 00TRF-0001:43–4710.31438/trf.hh2000.11 ↗
95. Orr DJ (2000) Macro-Scale Investigation of High Speed Gas Bearings for MEMS Devices. Doctoral dissertation, Massachusetts Institute of Technology