journal article·2004-04

Indentation crack initiation in ion-exchanged aluminosilicate glass

D. J. Morris, S. B. Myers, R. F. Cook

Journal of Materials Science· Volume 39· Issue 7
Publisher page

Abstract

The threshold load for crack initiation resulting from Vickers indentation is investigated in chemically tempered aluminosilicate glass. Aluminosilicate glass was ion-exchanged in a potassium nitrate salt bath at temperatures of 380, 400, and 420°C for times ranging from two to sixty minutes. The ion-exchange profiles were investigated using an electron microprobe, and the diffusion coefficients and activation energy for ion-exchange elucidated. Residual stresses were not measured directly, but were estimated using an indentation fracture analysis. A physically-based fracture model is developed to describe the threshold indentation load data. From kinetic and indentation threshold models, predictions of crack initiation thresholds are made over a wide range of ion-exchange conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Glass properties and applications · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. I. W. Donald J. Mater. Sci. 24 (1989) 4177.10.1007/BF00544488 ↗
2. R. F. Bartholomew and H. M. Garfinkel in “Glass: Science and Technology,” Vol. 5, edited by D. R. Uhlmann and N. J. Kreidl (Academic Press, New York, 1980) p. 217.
3. R. Tandon and D. J. Green J. Amer. Ceram. Soc. 74 (1991) 1981.10.1111/j.1151-2916.1991.tb07818.x ↗
4. D. J. Green ibid. 66 (1983) 807.10.1111/j.1151-2916.1983.tb10567.x ↗
5. S. Malkin and J. E. Ritter Key. Eng. Mat. 71 (1992) 195.10.4028/www.scientific.net/KEM.71.195 ↗
6. J. E. Ritter, K. Jakus and R. P. Panat in Materials Research Society Symposium Proceedings, Vol. 531, San Francisco, CA, edited by E. Suhir, M. Fukuda and C. R. Kurkjian (Materials Research Society, Warrendale, PA, 1998) p. 53.
7. R. Dal Maschio, V. M. Sglavo and G. D. Soraru Mat. Sci. Eng.-A Struct. A 119 (1989) L9.10.1016/0921-5093(89)90552-2 ↗
8. V. R. Howes J. Mater. Sci. Lett. 1 (1982) 341.10.1007/BF00726481 ↗
9. R. Tandon, D. J. Green and R. F. Cook J. Amer. Ceram. Soc. 73 (1990) 2619.10.1111/j.1151-2916.1990.tb06737.x ↗
10. R. Tandon and R. F. Cook ibid. 76 (1993) 885.10.1111/j.1151-2916.1993.tb05311.x ↗
11. B. R. Lawn and A. G. Evans J. Mater. Sci. 12 (1977) 2195.10.1007/BF00552240 ↗
12. S. Lathabai, J. Rodel, T. Dabbs and B. R. Lawn ibid. 26 (1991) 2157.10.1007/BF00549183 ↗
13. R. F. Cook and L. M. Braun ibid. 29 (1994) 2192.10.1007/BF01154700 ↗
14. P. J. Dwivedi and D. J. Green Fractogr. Glass. Ceram. III (1996) 473.
15. D. C. Joy “Monte Carlo Modeling for Electron Microscopy and Microanalysis” (Oxford University Press, New York, 1995).10.1093/oso/9780195088748.001.0001 ↗
16. D. C. Joy Monte Carlo Simulations of Electron Beam—Solid Interactions, Computer Programme—PHIROZ. Available at http://www.microscopy.com or mirrored at http://www.amc.anl. gov/ANLSoftwareLibrary. Copyright 1991.
17. R. F. Cook and G. M. Pharr J. Amer. Ceram. Soc. 73 (1990) 787.10.1111/j.1151-2916.1990.tb05119.x ↗
18. B. R. Lawn and E. R. Fuller J. Mater. Sci. 19 (1984) 4061.10.1007/BF00980772 ↗
19. D. J. Green and R. Tandon in “Advances in Fracture Research,” Vol. 4, Houston, TX, edited by K. Salama, K. Ravi-Chandar, D. M. R. Taplin and P. Rama Rao (Pergamon Press, Elmsford, NY, 1989) p. 2757.
20. P. J. Burnett and T. F. Page J. Mater. Sci. 20 (1985) 4624.10.1007/BF00559353 ↗
21. S. J. Bull and T. F. Page ibid. 23 (1988) 4217.10.1007/BF00551911 ↗
22. S. Urnes J. Amer. Ceram. Soc. 56 (1973) 514.10.1111/j.1151-2916.1973.tb12400.x ↗
23. A. J. Burggraaf and J. Cornelissen Phys. Chem. Glasses 5 (1964) 123.
24. G. R. Anstis, P. Chantikul, B. R. Lawn and D. B. Marshall J. Amer. Ceram. Soc. 64 (1981) 533.10.1111/j.1151-2916.1981.tb10320.x ↗
25. A. J. Burggraaf Phys. Chem. Glasses 7 (1966) 169.
26. V. Tyagi and A. K. Varshneya J. Non-Cryst. Solids 238 (1998) 186.10.1016/S0022-3093(98)00691-7 ↗
27. B. R. Lawn and D. B. Marshall Phys. Chem. Glasses 18 (1977) 7.
28. M. F. Gruninger, B. R. Lawn, E. N. Farabaugh and J. B. Jr. Wachtman J. Amer. Ceram. Soc. 70 (1987) 344.10.1111/j.1151-2916.1987.tb05006.x ↗
29. R. Tandon and D. J. Green ibid. 73 (1990) 970.10.1111/j.1151-2916.1990.tb05145.x ↗
30. D. B. Marshall and B. R. Lawn ibid. 63 (1980) 532.10.1111/j.1151-2916.1980.tb10759.x ↗
31. P. H. Kobrin and A. B. Harker J. Mater. Sci. 24 (1989) 1363.10.1007/PL00020221 ↗
32. M. T. Laugier J. Amer. Ceram. Soc. 68 (1985) C51.10.1111/j.1151-2916.1985.tb15281.x ↗
33. W. Bradshaw J. Mater. Sci. 14 2981.10.1007/BF00611483 ↗
34. R. Tandon, D. J. Green and R. F. Cook Acta Metall. Mater. 41 (1993) 399.10.1016/0956-7151(93)90070-9 ↗
35. B. R. Lawn, T. P. Dabbs and C. J. Fairbanks J. Mater. Sci. 18 (1983) 2785.10.1007/BF00547596 ↗
36. J. T. Hagan and M. V. Swain J. Phys. D-Appl. Phys. 11 (1978) 2091.10.1088/0022-3727/11/15/007 ↗
37. J. T. Hagan J. Mater. Sci. 14 (1979) 2975.10.1007/BF00611482 ↗
38. J. T. Hagan and S. Van Der Zwaag J. Non-Cryst. Solids 64 (1984) 249.10.1016/0022-3093(84)90221-7 ↗
39. S. S. Chiang, D. B. Marshall and A. G. Evans J. Appl. Phys. 53 (1982) 298.10.1063/1.329930 ↗
40. E. H. Yoffe Phil. Mag. A 46 (1982) 617.10.1080/01418618208236917 ↗
41. K. Tanaka J. Mater. Sci. 22 (1987) 1501.10.1007/BF01233154 ↗
42. H. Tada, P. C. Paris and G. R. Irwin “The Stress Analysis of Cracks Handbook” (ASME Press, New York, 2000).10.1115/1.801535 ↗
43. R. Tandon, D. J. Green and R. F. Cook Acta Metall. Mater. 41 (1993) 399.10.1016/0956-7151(93)90070-9 ↗
44. D. J. Green, R. Tandon and V. M. Sglavo Science 283 (1999) 1295.10.1126/science.283.5406.1295 ↗
45. D. S. Harding, W. C. Oliver and G. M. Pharr in Materials Research Society Symposium Proceedings, Vol. 356S, edited by P. Baker, P. Borgesen, P. H. Townsend, C. A. Ross and C. A. Volkert (Warrendale, PA, 1995) p. 663.