Cavitation and cavity-induced fracture during superplastic deformation
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. A. K. GHOSH, in “Deformation of polycrystals: Mechanisms and microstructures”, 2nd Risø Int. Conf. on Metallurgy and Materials Science, edited by N. Hansen, A. Horsewell, T. Leffers and H. Liholt (Risø National Laboratory, Roskilde, Denmark, 1981) p. 277.
2. C. C. BAMPTON and J. W. EDINGTON, Metall. Trans. 13A (1982) 1721.10.1007/BF02647827 ↗
3. K. MATSUKI, Y. UENO, M. YAMADA and Y. MURAKAMI, J. Jpn. Inst. Metals, 41 (1977) 1136.10.2320/jinstmet1952.41.11_1136 ↗
4. S. A. SHEI and T. G. LANGDON, J. Mater. Sci. 13 (1978) 1084.10.1007/BF00544704 ↗
5. C. H. CACERES and D. S. WILKINSON, Acta Metall. 32 (1984) 423.10.1016/0001-6160(84)90116-0 ↗
6. D. A. MILLER and T. G. LANGDON, Trans. JIM 21 (1980) 123.10.2320/matertrans1960.21.123 ↗
7. A. H. CHOKSHI and T. G. LANGDON, Acta Metall. Mater. 38 (1990) 867.10.1016/0956-7151(90)90040-N ↗
8. X. G. JIANG, J. Z. CUI and L. X. MA, Mater. Sci. Engng. A157 (1992) 37.
9. X. G. JIANG, J. Z. CUI and L. X. MA, Acta Metall. Mater. 41 (1993) 2721.10.1016/0956-7151(93)90141-E ↗
10. A. H. CHOKSHI and T. G. LANGDON, J. Mater. Sci. 24 (1989) 143.10.1007/BF00660946 ↗
11. D. W. LIVESEY and N. RIDLEY, Metall. Trans. 9A (1978) 519.10.1007/BF02646409 ↗
12. D. W. LIVESEY and N. RIDLEY, Metall. Trans. 13A (1982) 1619.10.1007/BF02644802 ↗
13. J. W. D. PATTERSON and N. RIDLEY, J. Mater. Sci. 16 (1981) 457.10.1007/BF00738637 ↗
14. J. BELZUNCE and M. SUERY, Acta Metall. 31 (1983) 1479.10.1016/0001-6160(83)90146-3 ↗
15. H. M. SHANG and M. SUERY, Metal Sci. 18 (1984) 143.10.1179/msc.1984.18.3.143 ↗
16. D. W. LIVESEY and N. RIDLEY, Metal Sci. 16 (1982) 563.10.1179/030634582790427145 ↗
17. M. SUERY and B. BAUDELET, Phil. Mag. 41A (1980) 41.
18. M. M. I. AHMED, F. A. MOHAMED and T. G. LANGDON, J. Mater. Sci. 14 (1979) 2913.10.1007/BF00611474 ↗
19. D. A. MILLER and T. G. LANGDON, Metall. Trans. 9A (1978) 1688.10.1007/BF02661955 ↗
20. B. P. KASHYAP and K. TANGRI, Metall. Trans. 18A (1987) 417.10.1007/BF02648802 ↗
21. A. H. CHOKSHI and T. G. LANGDON, Acta Metall. 37 (1989) 715.10.1016/0001-6160(89)90255-1 ↗
22. H. ISHIKAWA, D. G. BHAT, F. A. MOHAMED and T. G. LANGDON, Metall. Trans. 8A (1977) 523.10.1007/BF02661769 ↗
23. F. WAKAI and H. KATO, Adv. Ceram. Mater. 3 (1988) 71.10.1111/j.1551-2916.1988.tb00173.x ↗
24. D. J. SCHISSLER, A. H. CHOKSHI, T. G. NEIEH and J. WADSWORTH, Acta Metall. Mater. 39 (1991) 3227.10.1016/0956-7151(91)90057-8 ↗
25. A. H. CHOKSHI, J. Amer. Ceram. Soc. 74 (1991) 869.10.1111/j.1151-2916.1991.tb06944.x ↗
26. K. R. VENKATACHARI and R. RAJ, J. Amer. Ceram. Soc. 69 (1986) 135.10.1111/j.1151-2916.1986.tb04717.x ↗
27. F. WAKAI, S. SAKAGUCHI and Y. MATSUNO, Adv. Ceram. Mater. 1 (1986) 259.10.1111/j.1551-2916.1986.tb00026.x ↗
28. A. H. CHOKSHI, Mater. Sci. Engng. A 166 (1993) 119.10.1016/0921-5093(93)90316-7 ↗
29. R. DUCLOS, J. CRAMPON and B. AMANA, Acta Metall. 37 (1989) 877.10.1016/0001-6160(89)90014-X ↗
30. T. HERMANNSON, K. P. D. LAGERLOF and G. L. DUNLOP, in “Superplasticity and superplastic forming”, edited by C. H. Hamilton and N. E. Paton (TMS-AIME, Warrendale, PA, 1988) p. 631.
31. Y. MA and T. G. LANGDON, in “Superplasticity in metal, ceramics and intermetallics”, edited by M. J. Mayo, M. Kobayashi and J. Wadsworth (Materials Research Society, Pittsburgh, PA, 1990) p. 325.
32. M. W. MAHONEY and A. K. GHOSH, Metall. Trans. 18A (1987) 653.10.1007/BF02649481 ↗
33. A. H. CHOKSHI, D. J. SCHISSLER, T.-G. NIEH and J. WADSWORTH, in “Superplasticity in metal, ceramics and intermetallics”, edited by M. J. Mayo, M. Kobayashi and J. Wadsworth (Materials Research Society, Pittsburgh, PA, 1990) p. 379.
34. F. WAKAI and H. KATO, Adv. Ceram. Mater. 3 (1988) 71.10.1111/j.1551-2916.1988.tb00173.x ↗
35. T. G. NIEH and J. WADSWORTH, Acta Metall. Mater. 39 (1991) 3037.10.1016/0956-7151(91)90036-Z ↗
36. T. G. NIEH, in “Superplasticity in metal, ceramics and intermetallics”, edited by M. J. Mayo, M. Kobayashi and J. Wadsworth (Materials Research Society, Pittsburgh, PA, 1990) p. 185.
37. J. MUKHOPADHYAY, G. C. KASCHNER and A. K. MUKHERJEE, in “Superplasticity in aerospace II”, edited by Terry R. Mcnelley and H. Charles Heikkenen (TMS-AIME, Warrendale, PA, 1990).
38. T. TAKASUGI, S. RIKUKAWA and S. HANADA, Acta Metall. Mater. 40 (1992) 1895.10.1016/0956-7151(92)90176-F ↗
39. W. B. LEE, H. S. YANG, Y.-W. KIM and A. K. MUKHERJEE, Scripta Metall. Mater. 29 (1993) 1403.10.1016/0956-716X(93)90327-O ↗
40. T. G. LANGDON, Metal Sci. 16 (1982) 175.10.1179/030634582790427208 ↗
41. M. J. STOWELL, Metal Sci. 17 (1983) 1.10.1179/030634583790427513 ↗
42. N. RIDLEY and J. PILLING, in “Superplasticity”, edited by B. Baudelet and M. Suery (Centre Nationale de la Recherche Scientifique, Paris, 1985) p. 8.1.
43. M. SUERY, in “Superplasticity”, edited by B. Baudelet and M. Suery (Centre Nationale de la Recherche Scientifique, Paris, 1985) p. 9.1.
44. B. P. KASHYAP and A. K. MUKHERJEE, Res. Mechanica 17 (1986) 293.
45. J. PILLING and N. RIDLEY, Res. Mechanica 23 (1988) 31.
46. M. J. STOWELL, in “Superplastic forming of structural alloys”, edited by N. E. Paton and C. H. Hamilton (TMS-AIME, Warrendale, PA, 1982) p. 321.
47. J. N. GREENWOOD, D. R. MILLER and J. W. SUITER, Acta Metall. 2 (1954) 250.10.1016/0001-6160(54)90166-2 ↗
48. R. W. BALLUFFI and L. L. SEIGLE, Acta Metall. 3 (1955) 170.10.1016/0001-6160(55)90087-0 ↗
49. J. INTRATER and E. S. MACHLIN, Acta Metall. 7 (1959) 140.10.1016/0001-6160(59)90126-9 ↗
50. R. D. GIFKINS, Acta Metall. 4 (1956) 98.10.1016/0001-6160(56)90121-3 ↗
51. C. W. CHEN and E. S. MACHLIN, Acta Metall. 4 (1956) 655.10.1016/0001-6160(56)90171-7 ↗
52. C. W. CHEN and E. S. MACHLIN, Trans. Met. Soc. 209 (1957) 829.
53. J. E. HARRIS, Trans. Met. Soc. 233 (1965) 1509.
54. R. RAJ and M. F. ASHBY, Acta Metall. 23 (1975) 653.10.1016/0001-6160(75)90047-4 ↗
55. R. RAJ, Acta Metall. 26 (1978) 995.10.1016/0001-6160(78)90050-0 ↗
56. A. S. ARGON, I.-W. CHEN and C. W. LAU, in “Creep fatigue environment interactions”, edited by R. M. Pelloux and N. S. Stoloff (AIME, New York, 1980) p. 46.
57. H. RIEDEL, Acta Metall. 32 (1984) 313.10.1016/0001-6160(84)90104-4 ↗
58. J. P. HIRTH and W. D. NIX, Acta Metall. 33 (1985) 359.10.1016/0001-6160(85)90078-1 ↗
59. L. C. LIM, Acta Metall. 35 (1987) 1663.10.1016/0001-6160(87)90114-3 ↗
60. L. C. LIM, Acta Metall. 37 (1989) 969.10.1016/0001-6160(89)90024-2 ↗
61. A. H. CHOKSHI and A. K. MUKHERJEE, in “Superplasticity and superplastic forming”, edited by C.H. Hamilton and N. E. Paton (TMS-AIME, Warrendale, PA, 1988) p. 149.
62. Z. R. LIN, A. H. CHOKSHI and T. G. LANGDON, J. Mater. Sci. 23 (1988) 2712.10.1007/BF00547441 ↗
63. E. SMITH and J. T. BARNBY, Metal Sci. J. 1 (1967) 1.10.1179/msc.1967.1.1.1 ↗
64. A. N. STROH, Proc. R. Soc. A232 (1955) 548.
65. R. G. FLECK, D. M. R. TAPLIN and C. J. BEEVERS, Acta Metall. 23 (1975) 415.10.1016/0001-6160(75)90081-4 ↗
66. X. G. JIANG, J. Z. CUI and L. X. MA, Acta Metall. Mater. 41 (1993) 539.10.1016/0956-7151(93)90083-5 ↗
67. C. H. CACERES and S. P. SILVETTI, Acta Metall. 35 (1987) 897.10.1016/0001-6160(87)90168-4 ↗
68. A. NEEDLEMAN and J. R. RICE, Acta Metall. 28 (1980) 1315.10.1016/0001-6160(80)90001-2 ↗
69. A. H. CHOKSHI and A. K. MUKHERJEE, Acta Metall. 37 (1989) 3007.10.1016/0001-6160(89)90337-4 ↗
70. K. S. CHAN, R. A. PAGE and J. LANKFORD, Acta Metall. 34 (1986) 2361.10.1016/0001-6160(86)90139-2 ↗
71. G. EGGELER, J. C. EARTHMAN, N. NILSVANG and B. ILSCHNER, Acta Metall. 37 (1989) 49.10.1016/0001-6160(89)90265-4 ↗
72. A. H. CHOKSHI, Metall. Trans. 18A (1987) 63.10.1007/BF02646222 ↗
73. D. W. LIVESEY and N. RIDLEY, J. Mater. Sci. 17 (1982) 2257.10.1007/BF00543735 ↗
74. M. G. ZELIN, H. S. YANG, R. Z. VALIEV and A. K. MUKHERJEE, Metall. Trans. 24A (1993) 417.10.1007/BF02657329 ↗
75. A. H. CHOKSHI and T. G. LANGDON, in “Superplasticity”, edited by B. Baudelet and M. Suery (CNRS, Paris, 1985) p. 2.1.
76. T. KAINUMA, A. ARIELI and A. K. MUKHERJEE, in “Deformation of polycrystals: Mechanisms and microstructures”, edited by N. Hansen, A. Horsewell, T. Leffers and H. Lilholt (Risø National Laboratory, Roskilde, Denmark, 1980) p. 315.
77. W. J. CLEGG, J. A. ROOUM and A. K. MUKHERJEE, in “Strength of metals and alloys”, Vol. 2, edited by R. C. Gifkins (Pergamon Press, Oxford, 1983) p. 689.
78. C. I. SMITH and N. RIDLEY, Metals Tech. 1 (1974) 191.10.1179/030716974803287573 ↗
79. C. W. HUMPHRIES and N. RIDLEY, J. Mater. Sci. 9 (1974) 1429.10.1007/BF00552928 ↗
80. C. VAN RIET and P. DE MEESTER, Scripta Metall. 9 (1985) 795.10.1016/0036-9748(85)90194-2 ↗
81. K. T. PARK, SUSAN YANG, J. C. EARTHMAN and F. A. MOHAMED, Mater. Sci. Engng (in press).
82. R. B. VASTAVA and T. G. LANGDON, Acta Metall. 27 (1979) 251.10.1016/0001-6160(79)90103-2 ↗
83. D. L. HOLT, Trans. AIME 242 (1968) 25.
84. D. LEE, Acta Metall. 17 (1969) 1057.10.1016/0001-6160(69)90051-0 ↗
85. K. MATSUKI, Y. UENO and M. YAMADA, J. Jpn. Inst. Metals 38 (1974) 219.10.2320/jinstmet1952.38.3_219 ↗
86. O. A. KAIBYSHEV, R. Z. VALIEV and V. V. ASTANIN, Phys. Status Solidi (A) 35 (1976) 403.10.1002/pssa.2210350144 ↗
87. K. MATSUKI, H. MORITA, M. YAMADA and Y. MURAKAMI, Metal Sci. 11 (1977) 156.10.1179/msc.1977.11.5.156 ↗
88. I. I. NOVIKOV, V. K. PORTNOY and T. E. TEREN-TIEVA, Acta Metall. 25 (1977) 1139.10.1016/0001-6160(77)90201-2 ↗
89. M. J. MAYO and W. D. NIX, Acta Metall. 36 (1988) 2183.10.1016/0001-6160(88)90319-7 ↗
90. M. J. MAYO and W. D. NIX, Acta Metall. 37 (1989) 1121.10.1016/0001-6160(89)90108-9 ↗
91. R. Z. VALIEV and T. G. LANGDON, Acta Metall. Mater. 41 (1993) 949.10.1016/0956-7151(93)90029-R ↗
92. T. G. LANGDON, Mater. Sci. Engng. A166 (1993) 67.10.1016/0921-5093(93)90311-2 ↗
93. T. G. LANGDON, Mater. Sci. Engng. A137 (1991) 1.10.1016/0921-5093(91)90312-B ↗
94. D. W. LIVESEY and N. RIDLEY, J. Mater. Sci. 13 (1978) 825.10.1007/BF00570519 ↗
95. C. I. SMITH, B. NORGATE and N. RIDLEY, Metal Sci. 10 (1976) 182.10.1179/msc.1976.10.5.182 ↗
96. D. J. LIOYD and D. M. MOORE, in “Superplastic forming of structural alloys”, edited by N. E. Paton and C. H. Hamilton (TMS-AIME, Warrendale, PA, 1982) p. 147.
97. K.-T. PARK and F. A. MOHAMED, Metall. Trans. 21A (1990) 2605.10.1007/BF02647008 ↗
98. F. A. MOHAMED, J. Mater. Sci. 18 (1983) 582.10.1007/BF00560647 ↗
99. M. SUERY and B. BAUDELET, in “Superplastic forming of structural alloys”, edited by N. E. Paton and C. H. Hamilton (TMS-AIME, Warrendale, PA, 1982) p. 105.
100. S. SAGAT, P. BLENKINSOP, and D. M. R. TAPLIN, J. Inst. Metals 100 (1972) 268.