Effect of polyethylene oxide on 3D-printed PEO/LFP–PEO–PVDF composite electrodes
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Advanced Battery Materials and Technologies · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Han JW, Li H, Yang QH (2021) Compact energy storage enabled by graphenes: challenges, strategies and progress. Mater Today. 51552–565 https://doi.org/10.1016/j.mattod.2021.07.02610.1016/j.mattod.2021.07.026 ↗
2. Riaz A, Sarker MR, Saad MHM, Mohamed R (2021) Review on comparison of different energy storage technologies used in micro-energy harvesting, WSNs, low-cost microelectronic devices: challenges and recommendations. Sensors 21(15):504110.3390/s21155041 ↗
3. Wang ZC, Chen YH, Zhou YY, Ouyang J, Xu S, Wei L (2022) Miniaturized lithium-ion batteries for on-chip energy storage. Nanoscale Adv 4(20):4237–425710.1039/D2NA00566B ↗
4. Zheng SH, Shi XY, Das P, Wu ZS, Bao XH (2019) The road towards planar microbatteries and micro-supercapacitors: from 2D to 3D device geometries. Adv Mater 31(50):190058310.1002/adma.201900583 ↗
5. Patnaik SG, Jadon A, Tran CCH, Estève A, Guay D, Pech D (2020) High areal capacity porous Sn-Au alloys with long cycle life for Li-ion microbatteries. Sci Rep 10:1040510.1038/s41598-020-67309-7 ↗
6. Wang YX, Liu B, Li QY, Cartmell S, Ferrara S, Deng ZQD, Xiao J (2015) Lithium and lithium ion batteries for applications in microelectronic devices: a review. J Power Sour 286:330–34510.1016/j.jpowsour.2015.03.164 ↗
7. Wang CW, Fu K, Kammampata SP, McOwen DW, Samson AJ, Zhang L, Hitz GT, Nolan AM, Wachsman ED, Mo YF, Thangadurai V, Hu LB (2020) Garnet-type solid-state electrolytes: materials, interfaces, and batteries. Chem Rev 120(10):4257–430010.1021/acs.chemrev.9b00427 ↗
8. Kerman K, Luntz A, Viswanathan V, Chiang YM, Chen ZB (2017) Review-practical challenges hindering the development of solid state Li ion batteries. J Electrochem Soc 164(7):A1731–A174410.1149/2.1571707jes ↗
9. Tran MK, DaCosta A, Mevawalla A, Panchal S, Fowler M (2021) Comparative study of equivalent circuit models performance in four common lithium-ion batteries: LFP, NMC, LMO, NCA. Batteries 7(3):5110.3390/batteries7030051 ↗
10. Ramasubramanian B, Sundarrajan S, Chellappan V, Reddy MV, Ramakrishna S, Zaghib K (2022) Recent Development in carbon- LiFePO4 cathodes for lithium-ion batteries: a mini review. Batteries-Basel 8(69):133. https://doi.org/10.3390/batteries810013310.3390/batteries8100133 ↗
11. Lv WQ, Niu YH, Jian X, Zhang KHL, Wang W, Zhao JY, Wang ZM, Yang WQ, He WD (2016) Space matters: Li+ conduction versus strain effect at FePO4/LiFePO4 interface. Appl Phys Lett 108(8):08390110.1063/1.4942849 ↗
12. Fu Y, Guo C, Hao M, Han Y, Gao Y, Liu X (2010) Research progress on modification of lithium iron phosphate. Chin J Power Sources 34(9):960–962
13. Fan M, Meng QH, Chang X, Gu CF, Meng XH, Yin YX, Li HL, Wan LJ, Guo YG (2022) In situ electrochemical regeneration of degraded LiFePO4 electrode with functionalized prelithiation separator. Adv Energy Mater 12(18):210363010.1002/aenm.202103630 ↗
14. Wang MM, Liu K, Dutta S, Alessi DS, Rinklebe J, Ok YS, Tsang DCW (2022) Recycling of lithium iron phosphate batteries: status, technologies, challenges, and prospects. Renew Sustain Energy Rev 163:11251510.1016/j.rser.2022.112515 ↗
15. Lyu ZY, Lim GJH, Koh JJ, Li Y, Ma YW, Ding J, Wang JL, Hu Z, Wang J, Chen W, Chen YF (2021) Design and manufacture of 3D-printed batteries. Joule 5(1):89–11410.1016/j.joule.2020.11.010 ↗
16. Wang TL, Zhai LJ, Lin T, Shao HP (2025) Recent advances of flexible electrodes by direct ink writing. J Alloys Compd 1043:18433410.1016/j.jallcom.2025.184334 ↗
17. Scheideler WJ, Im J (2025) Recent advances in 3D printed electrodes—bridging the nano to mesoscale. Adv Sci 12(9):241195110.1002/advs.202411951 ↗
18. Liu CY, Cheng XX, Li BH, Chen ZW, Mi SL, Lao CS (2017) Fabrication and characterization of 3D-printed highly-porous 3D LiFePO4 electrodes by low temperature direct writing process. Materials 10(8):93410.3390/ma10080934 ↗
19. Wang JW, Sun Q, Gao XJ, Wang CH, Li WH, Holness FB, Zheng M, Li RY, Price AD, Sun XH, Sham TK, Sun XL (2018) Toward high areal energy and power density electrode for Li-ion batteries via optimized 3D printing approach. ACS Appl Mater Interfaces 10(58):39794–3980110.1021/acsami.8b14797 ↗
20. Ramos-Fajardo JM, Peláez-Tirado IM, Marín-Rueda JR, Castro-García M, Canales-Vázquez J, Pérez-Flores JC (2023) LFP-based binder-free electrodes produced via fused filament fabrication. J Phys Energy 5(3):03501010.1088/2515-7655/ace850 ↗
21. Sun CW, Liu J, Gong YD, Wilkinson DP, Zhang JJ (2017) Recent advances in all-solid-state rechargeable lithium batteries. Nano Energy 33:363–38610.1016/j.nanoen.2017.01.028 ↗
22. Fan L, Wei SY, Li SY, Li Q, Lu YY (2018) Recent progress of the solid-state electrolytes for high-energy metal-based batteries. Adv Energy Mater 8(11):170265710.1002/aenm.201702657 ↗
23. Liang JN, Luo J, Sun Q, Yang XF, Li RY, Sun XL (2019) Recent progress on solid-state hybrid electrolytes for solid-state lithium batteries. Energy Storag. Mater 21:308–33410.1016/j.ensm.2019.06.021 ↗
24. Keller M, Appetecchi GB, Kim GT, Sharova V, Schneider M, Schuhmacher J, Roters A, Passerini S (2017) Electrochemical performance of a solvent-free hybrid ceramic-polymer electrolyte based on Li7La3Zr2O12 in P(EO)15LiTFSI. J Power Sour 353:287–29710.1016/j.jpowsour.2017.04.014 ↗
25. Li XH, Deng YC, Li K, Yang ZY, Hu XY, Liu Y, Zhang Z (2023) Advancements in performance optimization of electrospun polyethylene oxide-based solid-state electrolytes for lithium-ion batteries. Polymers 15(18):372710.3390/polym15183727 ↗
26. Tu ZT, Chen KQ, Liu SJ, Wu X (2025) 3D printing of solid electrolyte and the application in all-solid-state batteries. Small Methods 9(7):240191210.1002/smtd.202401912 ↗
27. Pei MF, Shi HT, Yao FT, Liang ST, Xu ZW, Pei XY, Wang S, Hu YL (2021) 3D printing of advanced lithium batteries: a designing strategy of electrode/electrolyte architectures. J Mater Chem A 9(45):25237–2525710.1039/D1TA06683H ↗
28. Chen AN, Qu CH, Shi YS, Shi FF (2020) Manufacturing strategies for solid electrolyte in batteries. Front Energy Res 8:57144010.3389/fenrg.2020.571440 ↗
29. McOwen DW, Xu SM, Gong YH, Wen Y, Godbey GL, Gritton JE, Hamann TR, Dai JQ, Hitz GT, Hu LB, Wachsman ED (2018) 3D-printing electrolytes for solid-state batteries. Adv Mater 30(18):170713210.1002/adma.201707132 ↗
30. Cheng M, Jiang YZ, Yao WT, Yuan YF, Deivanayagam R, Foroozan T, Huang ZN, Song B, Rojaee R, Shokuhfar T, Pan YY, Lu J, Shahbazian-Yassar R (2018) Elevated-temperature 3D printing of hybrid solid-state electrolyte for Li-ion batteries. Adv Mater 30(39):e180061510.1002/adma.201800615 ↗
31. Ahn DB, Kim WY, Lee KH, Lee SS, Kim SH, Park S, Hong YK, Lee SY (2023) Enabling on-demand conformal Zn-ion batteries on non-developable surfaces. Adv Funct Mater 33(110):221159710.1002/adfm.202211597 ↗
32. Gambe Y, Kobayashi H, Iwase K, Stauss S, Honma I (2021) A photo-curable gel electrolyte ink for 3D-printable quasi-solid-state lithium-ion batteries. Dalton Trans 50(45):16504–1650810.1039/D1DT02918E ↗
33. Liu M, Song AL, Zhang XY, Wang J, Fan YQ, Wang GX, Tian H, Ma ZP, Shao GJ (2025) Interfacial lithium-ion transportation in solid-state batteries: challenges and prospects. Nano Energy 136:11074910.1016/j.nanoen.2025.110749 ↗
34. Wang DD, Wu XY, Ren YP, Li YR, Xie XL, Ma XQ, Razanau I, Chen XM, Lu JH, Pan KM (2025) A review of interface optimization strategies for solid electrolytes and anode materials. Nanoscale Adv 7(15):4535–455010.1039/D5NA00286A ↗
35. Zhao XX, Wang C, Fan XM, Li Y, Li DB, Zhang YL, Fan LZ (2025) Addressing the interface issues of all-solid-state lithium batteries by ultra-thin composite solid-state electrolyte combined with the integrated preparation technology. InfoMat 7(8):e7001210.1002/inf2.70012 ↗
36. Yang FW, Shen YJ, Zhang ZP, Ruan WH, Rong MZ, Zhang MQ (2025) Ultra-long life solid-state lithium metal batteries enabled by 3D-printing of integrated porous cathode/composite polymer electrolyte with dynamic covalent bonds. Adv Mater 37(42):e0905710.1002/adma.202509057 ↗
37. Manthiram A, Yu XW, Wang SF (2017) Lithium battery chemistries enabled by solid-state electrolytes. Nat Rev Mater 2(4):1610310.1038/natrevmats.2016.103 ↗
38. Chen RS, Li QH, Yu XQ, Chen LQ, Li H (2020) Approaching practically accessible solid-state batteries: stability issues related to solid electrolytes and interfaces. Chem Rev 120(14):6820–687710.1021/acs.chemrev.9b00268 ↗
39. Li Z, Fu JL, Zhou XY, Gui SW, Wei L, Yang H, Li H, Guo X (2023) Ionic conduction in polymer-based solid electrolytes. Adv Sci 10(10):220171810.1002/advs.202201718 ↗
40. Lu SD, Zhang RC, Wang XL, Sun PC, Lv W, Liu QJ, Jia NH (2015) Effect of PEO molecular weight on the miscibility and dynamics in epoxy/PEO blends. Eur Phys J E 38:11810.1140/epje/i2015-15118-0 ↗
41. Li TL, Park KN (2001) A Monte Carlo simulation of grafted poly(ethylene oxide) chains. Comput Theor Polym Sci 11(2):133–14210.1016/S1089-3156(99)00085-9 ↗
42. Atta MM, Ahmed RM, El Al SA, El-Bayoumi AS (2022) Radiation induced effect on structural and dielectric properties of polyaniline incorporation into polyvinylidene fluoride/barium titanate ternary composites. Synth Met 290:117154. https://doi.org/10.1016/j.synthmet.2022.11715410.1016/j.synthmet.2022.117154 ↗
43. Taha EO, Alyousef HA, Dorgham AM, Hemeda OM, Zakaly HMH, Noga P, Abdelhamied MM, Atta MM (2023) Electron beam irradiation and carbon nanotubes influence on PVDF-PZT composites for energy harvesting and storage applications: Changes in dynamic-mechanical and dielectric properties. Inorg Chem Commun 151:110624. https://doi.org/10.1016/j.inoche.2023.11062410.1016/j.inoche.2023.110624 ↗
44. Bystrov VS (2014) Molecular modeling and molecular dynamics simulation of the polarization switching phenomena in the ferroelectric polymers PVDF at the nanoscale. Physica B 432:21–25. https://doi.org/10.1016/j.physb.2013.09.01610.1016/j.physb.2013.09.016 ↗
45. Ren XY, Shao HP, Lin T, Zheng H (2016) 3D gel-printing-An additive manufacturing method for producing complex shape parts. Mater Des 101:80–87. https://doi.org/10.1016/j.matdes.2016.03.15210.1016/j.matdes.2016.03.152 ↗
46. Wang T, Zhai L, Lv M, Ji J, Lin T, Lian F, Meng N, Shao H (2025) Effect of lithium bis(trifluoromethanesulfonyl)imide on 3D-printed lithium iron phosphate electrodes. Ceram Int 51(22):35702–35710. https://doi.org/10.1016/j.ceramint.2025.05.29310.1016/j.ceramint.2025.05.293 ↗
47. Cong MM, Du YF, Liu YQ, Xu J, Zhao KD, Lian F, Lin T, Shao HP (2024) Preparation of lithium iron phosphate battery by 3D printing. Ceram Int 50(9):14749–14756. https://doi.org/10.1016/j.ceramint.2024.01.38910.1016/j.ceramint.2024.01.389 ↗
48. Duan J, Shao HP, Wu JL, Liu HY, Wang SQ, Lin T (2022) Effect of SiO2 in situ cross-linked CS/PVA on SrFe12O19 scaffolds prepared by 3D gel printing for targeting. Ceram Int 48(20):30307–30316. https://doi.org/10.1016/j.ceramint.2022.06.30310.1016/j.ceramint.2022.06.303 ↗
49. Lin H, Freeman BD (2004) Gas solubility, diffusivity and permeability in poly(ethylene oxide). J Membr Sci 239(1):105–117. https://doi.org/10.1016/j.memsci.2003.08.03110.1016/j.memsci.2003.08.031 ↗
50. Ji L, Guo ZS, Zhang YW (2019) Electrochemomechanical performance of porous electrode incorporating binder network. Sci. China-Technol. Sci. 62(8):1331–1340. https://doi.org/10.1007/s11431-018-9480-810.1007/s11431-018-9480-8 ↗
51. Lacey MJ, Jeschull F, Edström K, Brandell D (2013) Why PEO as a binder or polymer coating increases capacity in the Li-S system. Chem Commun 49(76):8531–8533. https://doi.org/10.1039/c3cc44772c10.1039/c3cc44772c ↗
52. Gutiérrez-Fernández E, Sena-Fernández J, Rebollar E, Ezquerra TA, Hermoso-Pinilla FJ, Sanz M, Gálvez O, Nogales A (2023) Development of polar phases in ferroelectric poly(vinylidene fluoride) (PVDF) nanoparticles. Polymer 264:12554010.1016/j.polymer.2022.125540 ↗
53. Zhou SH, Huang P, Xiong TZ, Yang F, Yang H, Huang YC, Li D, Deng JQ, Balogun MS (2021) Sub-thick electrodes with enhanced transport kinetics via in situ epitaxial heterogeneous interfaces for high areal-capacity lithium ion batteries. Small 17(85):210077810.1002/smll.202100778 ↗
54. Sun HT, Zhu J, Baumann D, Peng LL, Xu YX, Shakir I, Huang Y, Duan XF (2019) Hierarchical 3D electrodes for electrochemical energy storage. Nat Rev Mater 4(87):45–60
55. Barroso-Bujans F, Alegría A, Pomposo JA, Colmenero J (2013) Thermal stability of polymers confined in graphite oxide. Macromolecules 46(5):1890–189810.1021/ma302407v ↗
56. Lu JJ, Bai HY, Wang W, Zhang SW, Wang JY, Zhang Y, Liu XY (2016) Understanding of intermolecular interaction in PVDF/PTW blends: crystallization behavior, thermal, and dynamic mechanical properties. J Appl Polym Sci 133(38):4390810.1002/app.43908 ↗
57. Hanisch C, Loellhoeffel T, Diekmann J, Markley KJ, Haselrieder W, Kwade A (2015) Recycling of lithium-ion batteries: a novel method to separate coating and foil of electrodes. J Clean Prod 108:301–31110.1016/j.jclepro.2015.08.026 ↗
58. Moritoki H, Okuyama E (1996) Intrinsic criterion of plastic instability. J Mater Process Technol 60(1–4):649–65610.1016/0924-0136(96)02400-4 ↗
59. Lanzoni L, Tarantino AM (2016) A simple nonlinear model to simulate the localized necking and neck propagation. Int J Non-Linear Mech 84:94–10410.1016/j.ijnonlinmec.2016.04.008 ↗
60. Tong B, Song ZY, Feng WF, Zhu J, Yu HL, Huang XJ, Armand M, Zhou ZB, Zhang H (2023) Design of a Teflon-like anion for unprecedently enhanced lithium metal polymer batteries. Adv Energy Mater 13(15):220408510.1002/aenm.202204085 ↗
61. Hashim N, Subban RHY (2018) In: 3rd international sciences, technology and engineering conference (istec)—material chemistry. Penang, Malaysia
62. Lv F, Liu KX, Wang ZY, Zhu JF, Zhao Y, Yuan S (2021) Ultraviolet-cured polyethylene oxide-based composite electrolyte enabling stable cycling of lithium battery at low temperature. J Colloid Interface Sci 596:257–266. https://doi.org/10.1016/j.jcis.2021.02.09510.1016/j.jcis.2021.02.095 ↗
63. Marzantowicz M, Dygas JR, Krok F, Nowinski JL, Tomaszewska A, Florjanczyk Z, Zygadlo-Monikowska E (2006) Crystalline phases, morphology and conductivity of PEO:LiTFSI electrolytes in the eutectic region. J Power Sour 159(1):420–430. https://doi.org/10.1016/j.jpowsour.2006.02.04410.1016/j.jpowsour.2006.02.044 ↗
64. Liu CH, Tang XM, Wang YY, Sacci RL, Bras W, Keum JK, Chen XC (2022) Ionic conductivity enhancement of polymer electrolytes by directed crystallization. ACS Macro Lett 11(4):595–602. https://doi.org/10.1021/acsmacrolett.2c0004010.1021/acsmacrolett.2c00040 ↗
65. Kim S, Park SO, Lee MY, Lee JA, Kristanto I, Lee TK, Hwang D, Kim J, Wi TU, Lee HW, Kwak SK, Choi NS (2022) Stable electrode-electrolyte interfaces constructed by fluorine- and nitrogen-donating ionic additives for high-performance lithium metal batteries. Energy Storag. Mater 45:1–13. https://doi.org/10.1016/j.ensm.2021.10.03110.1016/j.ensm.2021.10.031 ↗
66. Cui Y, Zhao XL, Guo RS (2010) Improved electrochemical performance of La0.7Sr0.3MnO3 and carbon co-coated LiFePO4 synthesized by freeze-drying process. Electrochim Acta 55(3):922–926. https://doi.org/10.1016/j.electacta.2009.08.02010.1016/j.electacta.2009.08.020 ↗
67. Bourseau F, Grugeon S, Lafont U, Dupont L (2024) 3D printing of solvent-free PEO-Polyolefin solid polymer electrolyte by fused filament fabrication. Virtual Phys Prototyp 19(1):e2409975. https://doi.org/10.1080/17452759.2024.240997510.1080/17452759.2024.2409975 ↗
68. Vinegrad A, Ragones H, Jayakody N, Ardel G, Goor M, Kamir Y, Dorfman MM, Gladkikh A, Burstein L, Horowitz Y, Greenbaum S, Golodnitsky D (2021) Plasticized 3D-printed polymer electrolytes for lithium-ion batteries. J Electrochem Soc 168(11):110549. https://doi.org/10.1149/1945-7111/ac39d510.1149/1945-7111/ac39d5 ↗
69. Deiner LJ, Jenkins T, Howell T, Rottmayer M (2019) Aerosol jet printed polymer composite electrolytes for solid-state Li-ion batteries. Adv Eng Mater 21(12):1900952. https://doi.org/10.1002/adem.20190095210.1002/adem.201900952 ↗
70. Jeon EJ, Haidar S, Helmers L, Kwade A, Garnweitner G (2024) Ion-conductive vs. non-ion-conductive ceramic fillers in silane-linked polyethylene oxide-based composite polymer electrolytes with high room-temperature ionic conductivity. Energy Adv 3(10):2428–2438. https://doi.org/10.1039/d4ya00231h10.1039/d4ya00231h ↗
71. Liu C, Wang JX, Kou WJ, Yang ZH, Zhai PF, Liu Y, Wu WJ, Wang JT (2021) A flexible, ion-conducting solid electrolyte with vertically bicontinuous transfer channels toward high performance all-solid-state lithium batteries. Chem Eng J 404:126517. https://doi.org/10.1016/j.cej.2020.12651710.1016/j.cej.2020.126517 ↗
72. Wei BB, Huang S, Song YH, Wang X, Liu M, Jin HY, Cao GZ (2023) A three-in-one C60-integrated PEO-based solid polymer electrolyte enables superior all-solid-state lithium-sulfur batteries. J Mater Chem A 11(21):11426–11435. https://doi.org/10.1039/d3ta01226c10.1039/d3ta01226c ↗
73. Olmedo-Martínez JL, Lingua G, Unanue L, Król M, Ruokolainen J, Müller AJ, Mecerreyes D (2025) Boosting ionic conductivity by ordering nanoparticles within all-polymer poly(ethylene oxide) (PEO) nanocomposites. ACS Polym Au 5(5):488–493. https://doi.org/10.1021/acspolymersau.5c0007710.1021/acspolymersau.5c00077 ↗
74. Fu XL, Li YC, Liao CZ, Gong WP, Yang MY, Li RKY, Tjong SC, Lu ZG (2019) Enhanced electrochemical performance of solid PEO/LiClO4 electrolytes with a 3D porous Li6.28La3Zr2Al0.24O12 network. Compos Sci Technol 184:107863. https://doi.org/10.1016/j.compscitech.2019.10786310.1016/j.compscitech.2019.107863 ↗