Intergranular solidification defects in high-strength 2A14 aluminum alloy fabricated by laser additive manufacturing: Role of secondary phases
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Zhao H, Chakraborty P, Ponge D, Hickel T, Sun B, Wu C-H, Gault B, Raabe D (2022) Hydrogen trapping and embrittlement in high-strength Al alloys. Nature 602:437–441. https://doi.org/10.1038/s41586-021-04343-z10.1038/s41586-021-04343-z ↗
2. Aboulkhair NT, Simonelli M, Parry L, Ashcroft I, Tuck C, Hague R (2019) 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting. Prog Mater Sci 106:100578. https://doi.org/10.1016/j.pmatsci.2019.10057810.1016/j.pmatsci.2019.100578 ↗
3. Qu Z, Zhang Z, Liu R, Xu L, Zhang Y, Li X, Zhao Z, Duan Q, Wang S, Li S, Ma Y, Shao X, Yang R, Eckert J, Ritchie RO, Zhang Z (2024) High fatigue resistance in a titanium alloy via near-void-free 3D printing. Nature 626:999–1004. https://doi.org/10.1038/s41586-024-07048-110.1038/s41586-024-07048-1 ↗
4. Wang T-S, Hua Z-M, Yang Y, Jia H-L, Wang C, Zha M, Gao Y, Wang H-Y (2024) Macro-/micro-structures and mechanical properties of magnesium alloys based on additive manufacturing: a review. J Mater Sci 59:9908–9940. https://doi.org/10.1007/s10853-024-09455-110.1007/s10853-024-09455-1 ↗
5. Mukherjee T, Elmer JW, Wei HL, Lienert TJ, Zhang W, Kou S, Debroy T (2023) Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components. Prog Mater Sci 138:101153. https://doi.org/10.1016/j.pmatsci.2023.10115310.1016/j.pmatsci.2023.101153 ↗
6. Liu Z, Zhou Q, Liang X, Wang X, Li G, Vanmeensel K, Xie J (2024) Alloy design for laser powder bed fusion additive manufacturing: a critical review. Int J Extreme Manuf 6:022002. https://doi.org/10.1088/2631-7990/ad165710.1088/2631-7990/ad1657 ↗
7. Li MX, Rommel S, Hung CJ, Benson CL, Hebert RJ, Aindow M (2025) Microstructural development in an Al–Cr–Co–Mn–Zr I-phase alloy processed by laser powder bed fusion. J Mater Sci 60:3539–3557. https://doi.org/10.1007/s10853-025-10672-510.1007/s10853-025-10672-5 ↗
8. Zhang JL, Song B, Wei QS, Bourell D, Shi YS (2019) A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends. J Mater Sci Technol 35:270–284. https://doi.org/10.1016/j.jmst.2018.09.00410.1016/j.jmst.2018.09.004 ↗
9. Zhang J, Gao J, Song B, Zhang L, Han C, Cai C, Zhou K, Shi Y (2021) A novel crack-free Ti-modified Al-Cu-Mg alloy designed for selective laser melting. Addit Manuf 38:101829. https://doi.org/10.1016/j.addma.2020.10182910.1016/j.addma.2020.101829 ↗
10. Zhang X, Zheng H, Yu W (2022) A review on solidification cracks in high-strength aluminum alloys via laser powder bed fusion. Mater Today Proc 70:465–469. https://doi.org/10.1016/j.matpr.2022.09.36610.1016/j.matpr.2022.09.366 ↗
11. Wu S, Lei Z, Li B, Liang J, Chen Y (2022) Hot cracking evolution and formation mechanism in 2195 Al-Li alloy printed by laser powder bed fusion. Addit Manuf 54:102762. https://doi.org/10.1016/j.addma.2022.10276210.1016/j.addma.2022.102762 ↗
12. Li N, Wang T, Zhang L, Zhang L (2023) Crack initiation mechanism of laser powder bed fusion additive manufactured Al-Zn-Mg-Cu alloy. Mater Charact 195:112415. https://doi.org/10.1016/j.matchar.2022.11241510.1016/j.matchar.2022.112415 ↗
13. Chen Y, Zhang K, Huang J, Hosseini SRE, Li Z (2016) Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718. Mater Des 90:586–594. https://doi.org/10.1016/j.matdes.2015.10.15510.1016/j.matdes.2015.10.155 ↗
14. Sanaei N, Fatemi A (2021) Defects in additive manufactured metals and their effect on fatigue performance: a state-of-the-art review. Prog Mater Sci 117:100724. https://doi.org/10.1016/j.pmatsci.2020.10072410.1016/j.pmatsci.2020.100724 ↗
15. Wei Q, Xie Y, Teng Q, Shen M, Sun S, Cai C (2022) Crack types, mechanisms, and suppression methods during high-energy beam additive manufacturing of nickel-based superalloys: a review. Addit Manuf Front 1:100055. https://doi.org/10.1016/j.cjmeam.2022.10005510.1016/j.cjmeam.2022.100055 ↗
16. Wang N, Mokadem S, Rappaz M, Kurz W (2004) Solidification cracking of superalloy single- and bi-crystals. Acta Mater 52:3173–3182. https://doi.org/10.1016/j.actamat.2004.03.04710.1016/j.actamat.2004.03.047 ↗
17. Rappaz M, Drezet JM, Gremaud M (1999) A new hot-tearing criterion. Metall Mater Trans A 30:449–455. https://doi.org/10.1007/s11661-999-0334-z10.1007/s11661-999-0334-z ↗
18. Hyer H, Mehta A, Graydon K, Kljestan N, Knezevic M, Weiss D, Mcwilliams B, Cho K, Sohn Y (2022) High strength aluminum-cerium alloy processed by laser powder bed fusion. Addit Manuf 52:102657. https://doi.org/10.1016/j.addma.2022.10265710.1016/j.addma.2022.102657 ↗
19. Tan Q, Liu Y, Fan Z, Zhang J, Yin Y, Zhang M-X (2020) Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy. J Mater Sci Technol 58:34–45. https://doi.org/10.1016/j.jmst.2020.03.07010.1016/j.jmst.2020.03.070 ↗
20. Del Guercio G, Mccartney DG, Aboulkhair NT, Robertson S, Maclachlan R, Tuck C, Simonelli M (2022) Cracking behaviour of high-strength AA2024 aluminium alloy produced by Laser Powder Bed Fusion. Addit Manuf 54:102776. https://doi.org/10.1016/j.addma.2022.10277610.1016/j.addma.2022.102776 ↗
21. Gao J, Yan L, Wan J, Li J, Chen B (2024) Evolution of cracks in laser powder bed fused AA2024 and its processing parameter dependence. Mater Charact 215:114139. https://doi.org/10.1016/j.matchar.2024.11413910.1016/j.matchar.2024.114139 ↗
22. Karna S, Yuan L, Zhang T, Al-Aridi R, Gross AJ, Morrall D, Krentz T, Hitchcock D (2024) Microstructural analysis and defect characterization of additively manufactured AA6061 aluminum alloy via laser powder bed fusion. J Mater Sci Technol 219:288–306. https://doi.org/10.1016/j.jmst.2024.08.05610.1016/j.jmst.2024.08.056 ↗
23. Fan Z, Tan Q, Yuan L, Li X, Yin Y, Niu P, Zhao Y, Kang C, Li R, Yuan T, Stjohn DH, Zhang M-X, Huang H (2025) Solute-induced grain refinement for crack suppression in laser additive manufactured ceramics. Acta Mater 292:121069. https://doi.org/10.1016/j.actamat.2025.12106910.1016/j.actamat.2025.121069 ↗
24. Zhang Y, Guo B, Jiang M, Li J, Wang Z, Wang L, Wang J, Lin X (2024) Mechanism of grain boundary angle on solidification cracking in directed energy deposition Hastelloy X superalloys. Addit Manuf 93:104406. https://doi.org/10.1016/j.addma.2024.10440610.1016/j.addma.2024.104406 ↗
25. Zhang B, Ding H, Meng AC, Nemati S, Guo S, Meng WJ (2023) Crack reduction in Inconel 939 with Si addition processed by laser powder bed fusion additive manufacturing. Addit Manuf 72:103623. https://doi.org/10.1016/j.addma.2023.10362310.1016/j.addma.2023.103623 ↗
26. Editorial Board (2002) China aeronautical materials handbook, vol. 3: Aluminum alloys and magnesium alloys. Standards Press of China, Beijing, pp 84–93
27. Liu T, Huang B, Liu Z, Zhang L, Zhang Y, Jiang D, Chen L (2025) Eliminating intergranular solidification defects to achieve excellent additive manufacturing processability of aluminium alloy via Y alloying. Mater Sci Eng A 922:147638. https://doi.org/10.1016/j.msea.2024.14763810.1016/j.msea.2024.147638 ↗
28. Pham M-S, Dovgyy B, Hooper PA, Gourlay CM, Piglione A (2020) The role of side-branching in microstructure development in laser powder-bed fusion. Nat Commun 11:749. https://doi.org/10.1038/s41467-020-14453-310.1038/s41467-020-14453-3 ↗
29. Scheil E (1942) Bemerkungen zur Schichtkristallbildung. Int J Mater Res 34:70–72. https://doi.org/10.1515/ijmr-1942-34030310.1515/ijmr-1942-340303 ↗
30. Zhu S, Ke L, Chen Y, Xiao C, Shao Z, Li Z, Yu S, Shi Y (2024) An inter-layer remelting strategy to tailor microstructure and mechanical properties of 2219 Al-Cu alloy during wire arc additive manufacturing process and post-T6 heat treatment. Mater Sci Eng A 924:147771. https://doi.org/10.1016/j.msea.2024.14777110.1016/j.msea.2024.147771 ↗
31. Hutchinson CR, Ringer SP (2000) Precipitation processes in Al-Cu-Mg alloys microalloyed with Si. Metall Mater Trans A 31:2721–2733. https://doi.org/10.1007/BF0283033110.1007/BF02830331 ↗
32. Babu MH, Dev BC, Podder J (2022) Texture coefficient and band gap tailoring of Fe-doped SnO2 nanoparticles via thermal spray pyrolysis. Rare Met 41:1332–1341. https://doi.org/10.1007/s12598-019-01278-310.1007/s12598-019-01278-3 ↗
33. Li Y, Li H, Katgerman L, Du Q, Zhang J, Zhuang L (2021) Recent advances in hot tearing during casting of aluminium alloys. Prog Mater Sci 117:100741. https://doi.org/10.1016/j.pmatsci.2020.10074110.1016/j.pmatsci.2020.100741 ↗
34. Kou S (2015) A criterion for cracking during solidification. Acta Mater 88:366–374. https://doi.org/10.1016/j.actamat.2015.01.03410.1016/j.actamat.2015.01.034 ↗
35. Li G, Li X, Guo C, Zhou Y, Tan Q, Qu W, Li X, Hu X, Zhang M-X, Zhu Q (2022) Investigation into the effect of energy density on densification, surface roughness and loss of alloying elements of 7075 aluminium alloy processed by laser powder bed fusion. Opt Laser Technol 147:107621. https://doi.org/10.1016/j.optlastec.2021.10762110.1016/j.optlastec.2021.107621 ↗
36. Mullin KM, Pollock TM, Begley MR (2025) Assessment of critical flaw sizes and crack driving forces during additive manufacturing of metallic materials. Addit Manuf 111:104985. https://doi.org/10.1016/j.addma.2025.10498510.1016/j.addma.2025.104985 ↗
37. Sheikhi M, Jabbareh MA, Salari S, Sarmast-Ghahfarokhi S, Jin H, Beiranvand ZM, Zhou YN, Benoit MJ (2025) On the development of an interfacial energy and microstructure dependent model to predict bridging phenomenon and solidification cracking behavior. Acta Mater 301:121520. https://doi.org/10.1016/j.actamat.2025.12152010.1016/j.actamat.2025.121520 ↗
38. Rappaz M, Jacot A, Boettinger WJ (2003) Last-stage solidification of alloys: theoretical model of dendrite-arm and grain coalescence. Metall Mater Trans A 34:467–479. https://doi.org/10.1007/s11661-003-0083-310.1007/s11661-003-0083-3 ↗
39. Huang C, Shuai S, Wang P, Liu X, Wang J, Ren Z (2020) The effect of static magnetic field on solid–liquid interfacial free energy of Al–Cu alloy system. Scr Mater 187:232–236. https://doi.org/10.1016/j.scriptamat.2020.06.02510.1016/j.scriptamat.2020.06.025 ↗
40. Read WT, Shockley W (1950) Dislocation models of crystal grain boundaries. Phys Rev 78:275–289. https://doi.org/10.1103/PhysRev.78.27510.1103/PhysRev.78.275 ↗
41. Li R, Wang M, Li Z, Cao P, Yuan T, Zhu H (2020) Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: crack-inhibiting and multiple strengthening mechanisms. Acta Mater 193:83–98. https://doi.org/10.1016/j.actamat.2020.03.06010.1016/j.actamat.2020.03.060 ↗
42. Wen T, Li Z, Wang J, Luo Y, Yang F, Liu Z, Qiu D, Yang H, Ji S (2024) From crack-prone to crack-free: eliminating cracks in additive manufacturing of high-strength Mg2Si-modified Al-Mg-Si alloys. J Mater Sci Technol 204:276–291. https://doi.org/10.1016/j.jmst.2024.04.00910.1016/j.jmst.2024.04.009 ↗
43. Liu H, Lu S, Zhang Y, Chen H, Chen Y, Qian M (2022) Migration of solidification grain boundaries and prediction. Nat Commun 13:5910. https://doi.org/10.1038/s41467-022-33482-810.1038/s41467-022-33482-8 ↗
44. Wang Y, Lin X, Zhao Y, Zhang T, Fu J, Zheng N, Wang Z, Huang W (2022) Cracking mechanism and its susceptibility to scanning speed during laser power bed fusion processed high-strength 2024Al alloy. Mater Charact 194:112344. https://doi.org/10.1016/j.matchar.2022.11234410.1016/j.matchar.2022.112344 ↗
45. Montero-Sistiaga ML, Mertens R, Vrancken B, Wang X, Van Hooreweder B, Kruth J-P, Van Humbeeck J (2016) Changing the alloy composition of Al7075 for better processability by selective laser melting. J Mater Process Technol 238:437–445. https://doi.org/10.1016/j.jmatprotec.2016.08.00310.1016/j.jmatprotec.2016.08.003 ↗
46. Zhao Y, Ma Z, Yu L, Liu Y (2023) New alloy design approach to inhibiting hot cracking in laser additive manufactured nickel-based superalloys. Acta Mater 247:118736. https://doi.org/10.1016/j.actamat.2023.11873610.1016/j.actamat.2023.118736 ↗
47. Hyer H, Zhou L, Mehta A, Park S, Huynh T, Song S, Bai Y, Cho K, Mcwilliams B, Sohn Y (2021) Composition-dependent solidification cracking of aluminum-silicon alloys during laser powder bed fusion. Acta Mater 208:116698. https://doi.org/10.1016/j.actamat.2021.11669810.1016/j.actamat.2021.116698 ↗
48. Ghasemi A, Fereiduni E, Balbaa M, Elbestawi M, Habibi S (2022) Unraveling the low thermal conductivity of the LPBF fabricated pure Al, AlSi12, and AlSi10Mg alloys through substrate preheating. Addit Manuf 59:103148. https://doi.org/10.1016/j.addma.2022.10314810.1016/j.addma.2022.103148 ↗
49. Zhu Z, Hu Z, Seet H, Liu T, Liao W, Ramamurty U, Nai SML (2023) Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: microstructure, properties, and applications. Int J Mach Tools Manuf 190:104047. https://doi.org/10.1016/j.ijmachtools.2023.10404710.1016/j.ijmachtools.2023.104047 ↗
50. Zhang H, Ni DR, Xiao BL, Liu FC, Ma ZY (2024) Recent progress of aluminum alloys and aluminum matrix composites produced via laser powder bed fusion: a review. J Mater Sci 59:9857–9891. https://doi.org/10.1007/s10853-024-09368-z10.1007/s10853-024-09368-z ↗
51. Tan Q, Zhang M (2024) Recent advances in inoculation treatment for powder-based additive manufacturing of aluminium alloys. Mater Sci Eng R Rep 158:100773. https://doi.org/10.1016/j.mser.2024.10077310.1016/j.mser.2024.100773 ↗
52. Qi Y, Zhang H, Nie X, Hu Z, Zhu H, Zeng X (2020) A high strength Al–Li alloy produced by laser powder bed fusion: densification, microstructure, and mechanical properties. Addit Manuf 35:101346. https://doi.org/10.1016/j.addma.2020.10134610.1016/j.addma.2020.101346 ↗
53. Uddin SZ, Murr LE, Terrazas CA, Morton P, Roberson DA, Wicker RB (2018) Processing and characterization of crack-free aluminum 6061 using high-temperature heating in laser powder bed fusion additive manufacturing. Addit Manuf 22:405–415. https://doi.org/10.1016/j.addma.2018.05.04710.1016/j.addma.2018.05.047 ↗
54. Buchbinder D, Meiners W, Pirch N, Wissenbach K, Schrage J (2013) Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting. J Laser Appl 26:012004. https://doi.org/10.2351/1.482875510.2351/1.4828755 ↗