Microstructure characterization and mechanical properties of Ti3AlC2-Al3Ti/2024Al gradient composites with a laminate-reticular hierarchical structure
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: MXene and MAX Phase Materials · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. You X, Xing Z, Jiang S, Zhu Y, Lin Y, Qiu H, Nie R, Yang J, Hui D, Chen W, Chen Y (2024) A review of research on aluminum alloy materials in structural engineering. Dev Built Environ 17:10031910.1016/j.dibe.2023.100319 ↗
2. Rana RS, Purohit R, Das S (2012) Review of recent studies in Al matrix composites. Int J Sci Eng Res 3:1
3. Khalid MY, Umer R, Khan KA (2023) Review of recent trends and developments in aluminium 7075 alloy and its metal matrix composites (MMCs) for aircraft applications. Results Eng 20:10137210.1016/j.rineng.2023.101372 ↗
4. Zhou W, Chen C, Mikulova P, Dong M, Fan Y, Kikuchi K, Nomura N, Kawasaki A (2019) Thermal expansion behaviors of few-layered graphene-reinforced Al matrix composites. J Alloy Compd 792:98810.1016/j.jallcom.2019.04.140 ↗
5. Li M, Zhang Z, Gao H, Wang Y, Liang J, Shu D, Wang J, Sun B (2020) Formation of multilayer interfaces and the load transfer in graphene nanoplatelets reinforced Al matrix composites. Mater Charact 159:11001810.1016/j.matchar.2019.110018 ↗
6. Tiwari SK, Midathada A, Sharma S, Ravella UK (2018) Study of fabrication processes and properties of Al-CNT composites reinforced by carbon nano tubes-a review. Mater Today Proceed 5:2826210.1016/j.matpr.2018.10.109 ↗
7. Yu Z, Tan Z, Fan G, Xiong D, Guo Q, Lin R, Hu L, Li Z, Zhang D (2018) Effect of interfacial reaction on Young’s modulus in CNT/Al nanocomposite: a quantitative analysis. Mater Charact 137:8410.1016/j.matchar.2018.01.024 ↗
8. Sun H, Ou J, Cheng L, Sun L, Lu Y, Liu W (2024) Effect of TiC content on the microstructure, texture and mechanical properties of the 6061Al–TiC/6061Al laminated composites prepared by spark plasma sintering and roll bonding. J Mater Sci 59:14367. https://doi.org/10.1007/s10853-024-10067-y10.1007/s10853-024-10067-y ↗
9. Wang Y, Liu Q, Lan Z, Zhang B, Zhang H, Liu J, Ye F (2021) Strong and tough bioinspired nacre-like B4C/Al functionally graded materials with eliminated abrupt interfaces. Compos Commun 25:10074110.1016/j.coco.2021.100741 ↗
10. Xiang D, Su B, Wang D, Peng P, Yuan Z, Song C, Li B, Cui X, Gao G, Zhao B (2024) Ultrasonic longitudinal-torsional vibration helical milling internal thread of SiCp/Al composites: finite element simulation and machining quality research. J Manuf Process 131:183310.1016/j.jmapro.2024.10.018 ↗
11. Alexopoulos ND, Papanikos P (2008) Experimental and theoretical studies of corrosion-induced mechanical properties degradation of aircraft 2024 aluminum alloy. Mater Sci Eng A 498:24810.1016/j.msea.2008.08.024 ↗
12. Wang W, Zhai H, Chen L, Huang Z, Bei G, Greil P (2016) Preparation and mechanical properties of TiCx-(NiCu)3Al-CuNi2Ti-Ni hybrid composites by reactive pressureless sintering pre-alloyed Cu/Ti3AlC2 and Ni as Precursor. Mat Sci Eng A Struct 670:35110.1016/j.msea.2016.06.021 ↗
13. Lei C, Zhou Y, Zhai H, Huang Z, Hu W, Cai L, Wang Y, Yu Q, Wang H (2021) Thermal shock behavior of co-continuous TiCx-Cu cermets in air and anaerobic environment. Ceram Int 47:1642210.1016/j.ceramint.2020.10.246 ↗
14. Hu W, Huang Z, Wang Y, Li X, Zhai H, Zhou Y, Chen L (2021) Layered ternary MAX phases and their MX particulate derivative reinforced metal matrix composite: a review. J Alloy Compd 856:15731310.1016/j.jallcom.2020.157313 ↗
15. Hu W, Yu Q, Li B, Wen B, Han H, Huang Z, Zhou Y (2024) A strong, machinable, and multifunctional Ti3SiC2-(Ti3SiC2-Cf) composite: gradient architecture and mechanical properties. Ceram Int 50:1224410.1016/j.ceramint.2024.01.128 ↗
16. Wang H, Huang Z, Li X, Yu Q, Hu W, Zhuang W, Wu Y, Zhou Y (2024) In-situ TiC/Ti composites based on Ti2AlC–Ti system: Reaction process, microstructure, and mechanical properties. Ceram Int 50:402210.1016/j.ceramint.2023.11.171 ↗
17. Zhuang W, Huang Z, Pei D, Hu W, Yu Q, Wang H, Li X, Wu Y, Du Z, Sun Q (2024) Achieving exceptional strength by multi-dimensional in-situ Al3Ti, TiN, AlN reinforcements in Al matrix composites. J Alloy Compd 997:17488010.1016/j.jallcom.2024.174880 ↗
18. Jiang T (2023) Fabrication technology, research anddevelopment status, development trend of theternarylaminated structure MAX phase ceramicsmaterials. Adv Ceram 1:23
19. Zhang W, Li S, Zhang X, Fan S, Bei G (2023) Processing and characterization of new Ti3AlC2-yNy MAX solid solutions. Ceram Int 49:2589910.1016/j.ceramint.2023.05.138 ↗
20. Wang Y, Huang Z, Hu W, Cai L, Lei C, Yu Q, Jiao Y (2021) Preparation and characteristics of Ti3AlC2-Al3Ti/Al composite materials synthesized from pure Al and Ti3AlC2 powders. Mater Charact 178:11129810.1016/j.matchar.2021.111298 ↗
21. Zhuang W, Huang Z, Hu W, Yu Q, Wang H, Li X, Wu Y, Zhou Y (2023) Study of microstructure and mechanical properties of quasi-continuous network structured (Ti3AlC2-Al3Ti)/2024Al composites based on hot rolling. J Alloy Compd 968:17193610.1016/j.jallcom.2023.171936 ↗
22. Hu W, Huang Z, Cai L, Lei C, Yu W, Zhai H, Wo S, Li X, Zhou Y (2018) Microstructural characterization and mechanical properties of a novel TiC-based cermet bonded with Ni3 (Al, Ti) and NiAl duplexalloy. Mater Charact 135:29510.1016/j.matchar.2017.11.003 ↗
23. Hu W, Huang Z, Yu Q, Wang Y, Jiao Y, Zhou Y, Zhai H (2021) Investigation on High Temperature Mechanical Behaviors of TiC-γ′ Reinforced Ni Composite. Met Mater Int 27:300310.1007/s12540-020-00615-x ↗
24. Ritchie RO (2011) The conflicts between strength and toughness. Nat Mater 10:81710.1038/nmat3115 ↗
25. Becher PF (1991) Microstructural design of toughened ceramics. J Am Ceram Soc 74:25510.1111/j.1151-2916.1991.tb06872.x ↗
26. Chao ZL, Jiang LT, Chen GQ, Qiao J, Yu ZH, Cao YF, Wu GH (2019) The microstructure and ballistic performance of B4C/AA2024 functionally graded composites with wide range B4C volume fraction. Compos B Eng 161:62710.1016/j.compositesb.2018.12.147 ↗
27. Kırmızı G, Arık H, Çinici H (2019) Experimental study on mechanical and ballistic behaviours of silicon carbide reinforced functionally graded aluminum foam composites. Compos B Eng 164:34510.1016/j.compositesb.2018.11.076 ↗
28. Yang L, Shen P, Guo R, Li Y, Jiang Q (2019) A novel strategy for fabricating biomimetic gradient metal-ceramic composites by dynamic freeze casting and pressure infiltration. Scripta Mater 167:10110.1016/j.scriptamat.2019.04.004 ↗
29. Wu T, Hu Y, Leng Y, Zhang M, Naerkezha N, Wang M (2022) In situ observation of fracture in homogeneous and functionally graded 6061Al/SiCp composites. Mater Sci Eng A 830:14227910.1016/j.msea.2021.142279 ↗
30. Mingxing A, Hongxiang Z, Yang Z, Zhaoyun T, Zhenying H, Zhili Z, Shibo L (2006) Synthesis of Ti3AlC2 powders using Sn as an additive. J Am Ceram Soc 89:111410.1111/j.1551-2916.2005.00818.x ↗
31. Zhu Y, Wu X (2023) Heterostructured materials. Prog Mater Sci 131:10101910.1016/j.pmatsci.2022.101019 ↗
32. Huang Z, Bonneville J, Zhai H, Gauthier-Brunet V, Dubois S (2014) Microstructural characterization and compression properties of TiC0.61/Cu (Al) composite synthesized from Cu and Ti3AlC2 powders. J Alloy Compd 602:5310.1016/j.jallcom.2014.02.159 ↗
33. Boatemaa L, Brouwer JC, Van der Zwaag S, Sloof WG (2018) The effect of the TiC particle size on the preferred oxidation temperature for self-healing of oxide ceramic matrix materials. J Mater Sci 53:597310.1007/s10853-017-1973-x ↗
34. Long J, Pan Q, Tao N, Lu L (2018) Residual stress induced tension-compression asymmetry of gradient nanograined copper. Mater Res Lett 6:45610.1080/21663831.2018.1478898 ↗
35. Zhu Y, Wu X (2019) Perspective on hetero-deformation induced (HDI) hardening and back stress. Mater Res Lett 7:39310.1080/21663831.2019.1616331 ↗
36. Wang H, Huang Z, Yi J, Li X, Zhang J, Wang Y, Zhuang W, Yu Q (2022) Microstructure and high-temperature mechanical properties of co-continuous (Ti3AlC2+Al3Ti)/2024Al composite fabricated by pressureless infiltration. Ceram Int 48:123010.1016/j.ceramint.2021.09.208 ↗
37. Wang Y, Liu Q, Zhang B, Zhang H, Jin Y, Zhong Z, Ye J, Ren Y, Ye F, Wang W (2021) High damage-tolerance bio-inspired B4C/2024Al composites with adjustable mechanical performance by tuning ceramic thickness. Mater Sci Eng A 819:14146910.1016/j.msea.2021.141469 ↗
38. Li Y, Zhong S, Qian M, Zhang X, Jia Z, Geng L (2025) Design and fabrication of bionic Bouligand-structured SiC/2024Al composites via binder jetting additive manufacturing and pressure infiltration. Compos B Eng 301:11252610.1016/j.compositesb.2025.112526 ↗
39. Zhou H, Li Y, Wang H, Ran M, Tong Z, Zhang W, Liu J, Zheng W (2021) Fabrication of functionally graded diamond/Al composites by liquid-solid separation technology. Materials 14:02651310.3390/ma14123205 ↗
40. Srinivas PNS, Babu PR, Balakrishna B (2020) Microstructural, mechanical and tribological characterization on the Al based functionally graded material fabricated powder metallurgy. Mater Res Express 7:2651310.1088/2053-1591/ab6f41 ↗
41. Übeyli M, Balci E, Sarikan B, Öztaş MK, Camuşcu N, Yildirim RO, Keleş Ö (2014) The ballistic performance of SiC–AA7075 functionally graded composite produced by powder metallurgy. Mater Des (1980-2015) 56:3110.1016/j.matdes.2013.10.092 ↗
42. Guo N, Shen P, Guo R, Jiang Q (2019) Optimization of the properties in Al/SiC composites by tailoring microstructure through gelatin freeze casting. Mater Sci Eng A 748:28610.1016/j.msea.2019.01.093 ↗
43. Jin X, Wu L, Guo L, Yu H, Sun Y (2009) Experimental investigation of the mixed-mode crack propagation in ZrO2/NiCr functionally graded materials. Eng Fract Mech 76:180010.1016/j.engfracmech.2009.04.003 ↗
44. Wang YQ, Fritz R, Kiener D, Zhang JY, Liu G, Kolednik O, Pippan R, Sun J (2019) Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers. Acta Mater 180:7310.1016/j.actamat.2019.09.002 ↗
45. Wu XL, Jiang P, Chen L, Zhang JF, Yuan FP, Zhu YT (2014) Synergetic strengthening by gradient structure. Mater Res Lett 2:18510.1080/21663831.2014.935821 ↗