Wear properties of micro-arc oxidation coatings on aluminum alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Anodic Oxide Films and Nanostructures · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Yong Y (2024) Research on properties and applications of new lightweight aluminum alloy materials. HSET 84:99–107. https://doi.org/10.54097/yd6e9h9510.54097/yd6e9h95 ↗
2. Li S, Yue X, Li Q, Peng H, Dong B, Liu T, Yang H, Fan J, Shu S, Qiu F, Jiang Q (2023) Development and applications of aluminum alloys for aerospace industry. J Mater Res Technol 27:944–983. https://doi.org/10.1016/j.jmrt.2023.09.27410.1016/j.jmrt.2023.09.274 ↗
3. Aydın F (2024) Recent progress in aluminium matrix composites: a review on tribological performance. Trans Indian Inst Met 77:1907–1922. https://doi.org/10.1007/s12666-024-03306-y10.1007/s12666-024-03306-y ↗
4. Joseph RX, Vinodhini SP, Ramesh B (2025) Optimizing aluminum alloy performance for marine superstructures: Advanced nanocomposite coating for enhanced corrosion resistance, flame retardancy, and mechanical strength. Polym Degrad Stabil 277:110847. https://doi.org/10.1016/j.polymdegradstab.2024.11084710.1016/j.polymdegradstab.2024.110847 ↗
5. Akhyar RI, Yaqin A, Farhan Z Jalil (2021) Surface Roughness and Hardness Characteristic of 2024 Aluminum Alloy by Electroplating Ni-Cr, J Phys Conf Ser. https://doi.org/10.1088/1742-6596/2000/1/012009.10.1088/1742-6596/2000/1/012009 ↗
6. Rahimi A, Sarraf S, Soltanieh M (2023) Nickel electroplating of 6061–T6 aluminum alloy using anodizing process as the pretreatment. J Mater Res Technol 27:5701–5708. https://doi.org/10.1016/j.jmrt.2023.10.28510.1016/j.jmrt.2023.10.285 ↗
7. Lindner T, Saborowski E, Scholze M, Zillmann B, Lampke T (2018) Thermal spray coatings as an adhesion promoter in metal/FRP joints. Metals 8:769. https://doi.org/10.3390/met810076910.3390/met8100769 ↗
8. Kumar K, Kumar S, Gill HS (2024) Role of carbide-based thermal-sprayed coatings to prevent failure for boiler steels: a review. J Fail Anal and Preven 24:1628–1663. https://doi.org/10.1007/s11668-024-01974-y10.1007/s11668-024-01974-y ↗
9. Thao DX, Duc CP (2022) A study on the effects of plasma spraying parameters on the adhesion strength of Cr3C2-NiCr coating on 16Mn steel, Eureka: PE, pp 91–100. https://doi.org/10.21303/2461-4262.2022.001827.10.21303/2461-4262.2022.001827 ↗
10. Kromer R, Costil S, Verdy C, Gojon S, Liao H (2018) Laser surface texturing to enhance adhesion bond strength of spray coatings – cold spraying, wire-arc spraying, and atmospheric plasma spraying. Surf Coat Technol 352:642–653. https://doi.org/10.1016/j.surfcoat.2017.05.00710.1016/j.surfcoat.2017.05.007 ↗
11. Korzekwa J (2023) Modification of the structure and properties of oxide layers on aluminium alloys: a review. Rev Adv Mater Sci 62:20230108. https://doi.org/10.1515/rams-2023-010810.1515/rams-2023-0108 ↗
12. Li H, Kong S, Liu Z, Wang Z, Geng Y (2024) Hardness distribution and growth behavior of micro-arc oxide ceramic film with positive and negative pulse coordination. Nanomaterials 14:842. https://doi.org/10.3390/nano1410084210.3390/nano14100842 ↗
13. Dai W, Zhang C, Yue H, Li Q, Guo C, Zhang J, Zhao G, Yang X (2023) A review on the fatigue performance of micro-arc oxidation coated Al alloys with micro-defects and residual stress. J Mater Res Technol 25:4554–4581. https://doi.org/10.1016/j.jmrt.2023.06.24410.1016/j.jmrt.2023.06.244 ↗
14. Qin L, Fu Z, Liu L, Han X, Ma J, Li B, Zhu X (2024) Influence of micro-arc oxidation on the microstructure and dielectric properties of anodic aluminum oxide. Sci Rep 14:23673. https://doi.org/10.1038/s41598-024-74827-110.1038/s41598-024-74827-1 ↗
15. Hu C-J, Hsieh M-H (2014) Preparation of ceramic coatings on an Al–Si alloy by the incorporation of ZrO2 particles in microarc oxidation. Surf Coat Technol 258:275–283. https://doi.org/10.1016/j.surfcoat.2014.09.01210.1016/j.surfcoat.2014.09.012 ↗
16. Yang W, Wu S, Xu D, Gao W, Yao Y, Guo Q, Chen J (2020) Preparation and performance of alumina ceramic coating doped with aluminum nitride by micro arc oxidation. Ceram Int 46:17112–17116. https://doi.org/10.1016/j.ceramint.2020.03.17910.1016/j.ceramint.2020.03.179 ↗
17. Yürektürk Y, Muhaffel F, Baydoğan M (2015) Characterization of micro arc oxidized 6082 aluminum alloy in an electrolyte containing carbon nanotubes. Surf Coat Technol 269:83–90. https://doi.org/10.1016/j.surfcoat.2014.12.05810.1016/j.surfcoat.2014.12.058 ↗
18. Chen X, Song H, Pu H, Zheng R, Zhang M, Zhang D (2024) Study of wear and corrosion resistance of ATO nanoparticle–doped micro-arc oxide film layers. Int J App Ceramic Tech 21:1078–1093. https://doi.org/10.1111/ijac.1459910.1111/ijac.14599 ↗
19. Yang C, Sun M, Ying T, Huang A, Chen P, Zhou C, Chu PK, Zeng X (2024) Optimization of tribological properties and corrosion resistance of MAO coatings on LY12 aluminum alloy by co-doping with graphite particles and in situ formation of zinc phosphate. Ceram Int 50:46018–46031. https://doi.org/10.1016/j.ceramint.2024.08.44310.1016/j.ceramint.2024.08.443 ↗
20. Wu M, Jiang F (2024) Effect of the alloying element Sc and Zr in 5B70 Al alloy on the microstructure, toughness and tribological properties of MAO ceramic film. Mater Charact 215:114218. https://doi.org/10.1016/j.matchar.2024.11421810.1016/j.matchar.2024.114218 ↗
21. Tran Q-P, Kuo Y-C, Sun J-K, He J-L, Chin T-S (2016) High quality oxide-layers on Al-alloy by micro-arc oxidation using hybrid voltages. Surf Coat Technol 303:61–67. https://doi.org/10.1016/j.surfcoat.2016.03.04910.1016/j.surfcoat.2016.03.049 ↗
22. Yerokhin AL, Nie X, Leyland A, Matthews A, Dowey SJ (1999) Plasma electrolysis for surface engineering. Surf Coat Technol 122:73–93. https://doi.org/10.1016/S0257-8972(99)00441-710.1016/S0257-8972(99)00441-7 ↗
23. Narayanan TSNS, Lee M-H (2016) Characteristics of microarc oxidation coatings deposited on magnesium using alkaline and acidic electrolytes in a single stage as well as using dual electrolytes in two stages. J Alloy Compd 687:720–732. https://doi.org/10.1016/j.jallcom.2016.06.18910.1016/j.jallcom.2016.06.189 ↗
24. Li J, Bian Y, Tu X, Li W, Song D (2022) Influence of surface roughness of substrate on corrosion behavior of MAO coated ZM5 Mg alloy. J Electroanal Chem 910:116206. https://doi.org/10.1016/j.jelechem.2022.11620610.1016/j.jelechem.2022.116206 ↗
25. Abbas A, Kung H-P, Lin H-C (2023) Effects of electrical parameters on micro-arc oxidation coatings on pure titanium. Micromachines 14:1950. https://doi.org/10.3390/mi1410195010.3390/mi14101950 ↗
26. Ye Z, Xiao S, Chen Y, Fan S, Wu Y, Su F, Chu PK (2025) In situ fabricated yttrium doping coatings on aluminum alloy as highly affinity kosmotrope fluorine anti-corrosion surface. Chem Eng J 506:160032. https://doi.org/10.1016/j.cej.2025.16003210.1016/j.cej.2025.160032 ↗
27. Zhang C, Guo C, Dai W, Li Z, Yue H, Li Q, Zhang J, Shang Z (2024) Effects of coating porosity, thickness and residual stress on stress and fatigue behavior of micro-arc oxidation coated aero Al alloys. J Mater Res Technol 31:4139–4152. https://doi.org/10.1016/j.jmrt.2024.07.06710.1016/j.jmrt.2024.07.067 ↗
28. Yang C, Sun Z, Wang C, Huang A, Ye Z, Ying T, Zhou L, Xiao S, Chu PK, Zeng X (2025) A self-sealing and self-healing MAO corrosion-resistant coating on aluminum alloy by in situ growth of CePO4/Al2O3. Corros Sci 245:112706. https://doi.org/10.1016/j.corsci.2025.11270610.1016/j.corsci.2025.112706 ↗
29. Yerokhin AL, Shatrov A, Samsonov V, Shashkov P, Pilkington A, Leyland A, Matthews A (2005) Oxide ceramic coatings on aluminium alloys produced by a pulsed bipolar plasma electrolytic oxidation process. Surf Coat Technol 199:150–157. https://doi.org/10.1016/j.surfcoat.2004.10.14710.1016/j.surfcoat.2004.10.147 ↗
30. Kaseem M, Fatimah S, Nashrah N, Ko YG (2021) Recent progress in surface modification of metals coated by plasma electrolytic oxidation: principle, structure, and performance. Prog Mater Sci 117:100735. https://doi.org/10.1016/j.pmatsci.2020.10073510.1016/j.pmatsci.2020.100735 ↗
31. Gębarowski W, Pietrzyk S (2014) Growth characteristics of the oxide layer on aluminium in the process of plasma electrolytic oxidation. Arch Metall Mater 59:407–411. https://doi.org/10.2478/amm-2014-007010.2478/amm-2014-0070 ↗
32. Guo Z, Wang N, Chen Y, Xu Y, Zhao Q, Zhang Y, Bai X, Yu Y, Zhao Y (2024) Regulation the graphene oxide concentration for the low energy consumption ceramic coating. Prog Org Coat 188:108200. https://doi.org/10.1016/j.porgcoat.2023.10820010.1016/j.porgcoat.2023.108200 ↗
33. Chai Y, Yan J, Wang C, Mei L (2023) Effect of electrical parameters on the growth and properties of 7075 aluminum alloy film based on scanning micro-arc oxidation with mesh electrode. J Mater Res Technol 25:988–998. https://doi.org/10.1016/j.jmrt.2023.06.02010.1016/j.jmrt.2023.06.020 ↗
34. Wei CB, Tian XB, Yang SQ, Wang XB, Fu RKY, Chu PK (2007) Anode current effects in plasma electrolytic oxidation. Surf Coat Technol 201:5021–5024. https://doi.org/10.1016/j.surfcoat.2006.07.10310.1016/j.surfcoat.2006.07.103 ↗
35. Matykina E, Arrabal R, Mohedano M, Mingo B, Gonzalez J, Pardo A, Merino MC (2017) Recent advances in energy efficient PEO processing of aluminium alloys. Trans Nonferrous Met Soc China 27:1439–1454. https://doi.org/10.1016/S1003-6326(17)60166-310.1016/S1003-6326(17)60166-3 ↗
36. Jin H, Chen H, Feng Z, Huang Z, Hu H, Gan T, Zhang Y (2025) Pulsed laser-induced plasma treatment for micro-arc oxidation of aluminum alloy to resist corrosion in chloride-rich environment. Surf Interfaces 72:107311. https://doi.org/10.1016/j.surfin.2025.10731110.1016/j.surfin.2025.107311 ↗
37. Zhu Z, Lu H, Shen T, Wang Z, Xu G, Liu Z, Yang H (2025) Performance study of scanning micro-arc oxidation ceramic coatings on aluminum alloys based on different electrolyte flow rates. Surf Coat Technol 496:131686. https://doi.org/10.1016/j.surfcoat.2024.13168610.1016/j.surfcoat.2024.131686 ↗
38. Yang S, Sun R, Chen K (2022) Self-healing performance and corrosion resistance of phytic acid/cerium composite coating on microarc-oxidized magnesium alloy. Chem Eng J 428:131198. https://doi.org/10.1016/j.cej.2021.13119810.1016/j.cej.2021.131198 ↗
39. Tian C, Liu Y, Chen J (2025) Improvement on insulation and dielectric properties of ceramic coatings on 1060 aluminum based on micro-arc oxidation with Al2O3 nanoparticle additive. Ceram Int 51:46623–46632. https://doi.org/10.1016/j.ceramint.2025.07.36810.1016/j.ceramint.2025.07.368 ↗
40. Jia E, Lu H, Xu G, Xue B, Wang C, Chai G, Yang H, Li J (2023) Polyvinyl alcohol/polyethylene glycol composite hydrogel parceling on aluminum: toward more robust micro-arc oxidation coatings. Ceram Int 49:13081–13091. https://doi.org/10.1016/j.ceramint.2022.12.18410.1016/j.ceramint.2022.12.184 ↗
41. Jin L, Li Y, Liu C, Fan X, Zhu M (2023) Friction mechanism of DLC/MAO wear-resistant coatings with porous surface texture constructed in-situ by micro-arc oxidation. Surf Coat Technol 473:130010. https://doi.org/10.1016/j.surfcoat.2023.13001010.1016/j.surfcoat.2023.130010 ↗
42. Yin J, Cui Y, Shang Y, Lu L, Du R, Zhu M (2025) Investigation of third harmonic laser-induced damage on micro-arc oxidized and composite-coated aluminum alloy 7075. J Alloys Compd 1032:181087. https://doi.org/10.1016/j.jallcom.2025.18108710.1016/j.jallcom.2025.181087 ↗
43. Yang E, Yang R, Wei W, Mo Q, Liang F, Li D, Li W (2024) Corrosion resistance and antibacterial properties of hydrophobic modified Ce-doped micro-arc oxidation coating. J Mater Res Technol 29:3303–3316. https://doi.org/10.1016/j.jmrt.2024.02.05210.1016/j.jmrt.2024.02.052 ↗
44. Abbas A, Wang T-Y, Lin H-C (2023) Effects of electrolyte compositions and electrical parameters on micro-arc oxidation coatings on 7075 Aluminum Alloy. J Compos Sci 7:472. https://doi.org/10.3390/jcs711047210.3390/jcs7110472 ↗
45. Al-Athel KS, Ibrahim M, Arif AFM, Akhtar SS (2017) Effect of composition and thickness on the hardness and scratch resistance of copper and copper alloy coatings. Arab J Sci Eng 42:4895–4904. https://doi.org/10.1007/s13369-017-2661-510.1007/s13369-017-2661-5 ↗
46. Raghavendra CR, Basavarajappa S, Sogalad I (2021) Dry sliding wear behaviour of nano coating: influence of coating parameters and surface roughness. Trans Indian Inst Met 74:2887–2900. https://doi.org/10.1007/s12666-021-02365-910.1007/s12666-021-02365-9 ↗
47. Korobov Y, Khudorozhkova Y, Hillig H, Vopneruk A, Kotelnikov A, Burov S, Balu P, Makarov A, Chernov A (2019) The effect of thickness on the properties of laser-deposited NiBSi-WC coating on a Cu-Cr-Zr substrate. Photonics 6:127. https://doi.org/10.3390/photonics604012710.3390/photonics6040127 ↗
48. Martin J, Melhem A, Shchedrina I, Duchanoy T, Nominé A, Henrion G, Czerwiec T, Belmonte T (2013) Effects of electrical parameters on plasma electrolytic oxidation of aluminium. Surf Coat Technol 221:70–76. https://doi.org/10.1016/j.surfcoat.2013.01.02910.1016/j.surfcoat.2013.01.029 ↗
49. Yao W, Wu L, Wang J, Jiang B, Zhang D, Serdechnova M, Shulha T, Blawert C, Zheludkevich ML, Pan F (2022) Micro-arc oxidation of magnesium alloys: a review. J Mater Sci Technol 118:158–180. https://doi.org/10.1016/j.jmst.2021.11.05310.1016/j.jmst.2021.11.053 ↗
50. Liu X, Wang C, Lei J, Song P, Huang T, Zhang X, Yang T, Ji V (2025) Micro‐Arc oxidation of aluminum alloys: mechanism, defects, and corrosion resistance. Adv Eng Mater. https://doi.org/10.1002/adem.20240274810.1002/adem.202402748 ↗
51. Hussein RO, Nie X, Northwood DO (2013) An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing. Electrochim Acta 112:111–119. https://doi.org/10.1016/j.electacta.2013.08.13710.1016/j.electacta.2013.08.137 ↗
52. Li W, Qian Z, Liu X, Zhu L, Liu H (2015) Investigation of micro-arc oxidation coating growth patterns of aluminum alloy by two-step oxidation method. Appl Surf Sci 356:581–586. https://doi.org/10.1016/j.apsusc.2015.07.00510.1016/j.apsusc.2015.07.005 ↗
53. Nashrah N, Kamil MP, Yoon DK, Kim YG, Ko YG (2019) Formation mechanism of oxide layer on AZ31 Mg alloy subjected to micro-arc oxidation considering surface roughness. Appl Surf Sci 497:143772. https://doi.org/10.1016/j.apsusc.2019.14377210.1016/j.apsusc.2019.143772 ↗
54. Hao Y, Ye Z, Ye M, Dong H, Wang L, Du Y (2023) Construction and growth of black PEO coatings on aluminum alloys for enhanced wear and impact resistance. Ceram Int 49:30782–30793. https://doi.org/10.1016/j.ceramint.2023.07.03410.1016/j.ceramint.2023.07.034 ↗
55. Hussein RO, Northwood DO, Nie X (2010) Coating growth behavior during the plasma electrolytic oxidation process. J Vac Sci Technol A Vac Surf Films 28:766–773. https://doi.org/10.1116/1.342958310.1116/1.3429583 ↗
56. Hussein RO, Nie X, Northwood DO (2010) Influence of process parameters on electrolytic plasma discharging behaviour and aluminum oxide coating microstructure. Surf Coat Technol 205:1659–1667. https://doi.org/10.1016/j.surfcoat.2010.08.05910.1016/j.surfcoat.2010.08.059 ↗
57. Li X, Li X, Li Y, Dong C, Tian H, Wang S, Zhao Q (2019) Growth mechanism of micro-arc oxidation film on 6061 aluminum alloy. Mater Res Express 6:066404. https://doi.org/10.1088/2053-1591/ab0a2010.1088/2053-1591/ab0a20 ↗
58. Pillai AM, Ghosh R, Dey A, Prajwal K, Rajendra A, Sharma AK, Sampath S (2021) Crystalline and amorphous PEO based ceramic coatings on AA6061: nanoindentation and corrosion studies. Ceram Int 47:14707–14716. https://doi.org/10.1016/j.ceramint.2021.01.14710.1016/j.ceramint.2021.01.147 ↗
59. Shao W, Liu C, Wu Q, Li H, Angurel LA, De La Fuente GF, Jiang B (2022) Comparison of in-situ oxidation behavior of Zr by micro-arc oxidation and selective laser melting. J Eur Ceram Soc 42:6703–6712. https://doi.org/10.1016/j.jeurceramsoc.2022.07.00510.1016/j.jeurceramsoc.2022.07.005 ↗
60. Hussein RO, Nie X, Northwood DO (2019) Effect of current mode on the plasma discharge, microstructure and corrosion resistance of oxide coatings produced on aluminum alloy by plasma electrolytic oxidation, In: Lisbon, Portugal. 124: 3–16.10.2495/MC190011 ↗
61. Liu R, Wu J, Xue W, Qu Y, Yang C, Wang B, Wu X (2014) Discharge behaviors during plasma electrolytic oxidation on aluminum alloy. Mater Chem Phys 148:284–292. https://doi.org/10.1016/j.matchemphys.2014.07.04510.1016/j.matchemphys.2014.07.045 ↗
62. Mojsilović K, Serdechnova M, Blawert C, Kasneryk V, Zhang Z, Wieland DCF, Vasilić R, Zheludkevich ML (2025) Tailoring plasma electrolytic oxidation through metallic cation addition: insights from bipolar and unipolar electrical regimes. Appl Surf Sci Adv 29:100845. https://doi.org/10.1016/j.apsadv.2025.10084510.1016/j.apsadv.2025.100845 ↗
63. Clyne TW, Troughton SC (2019) A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals. Int Mater Rev 64:127–162. https://doi.org/10.1080/09506608.2018.146649210.1080/09506608.2018.1466492 ↗
64. Jaspard-Mécuson F, Czerwiec T, Henrion G, Belmonte T, Dujardin L, Viola A, Beauvir J (2007) Tailored aluminium oxide layers by bipolar current adjustment in the plasma electrolytic oxidation (PEO) process. Surf Coat Technol 201:8677–8682. https://doi.org/10.1016/j.surfcoat.2006.09.00510.1016/j.surfcoat.2006.09.005 ↗
65. Zhu Z (2025) Performance evaluation of scanning micro-arc oxidation ceramic coating on aluminum alloy under different current working modes. Mater Chem Phys 336:130538. https://doi.org/10.1016/j.matchemphys.2025.13053810.1016/j.matchemphys.2025.130538 ↗
66. Satbayeva Z, Zhassulan A, Rakhadilov B, Shynarbek A, Ormanbekov K, Leonidova A (2025) Effect of micro-arc oxidation voltage on the surface morphology and properties of ceramic coatings on 7075 aluminum alloy. Metals 15:746. https://doi.org/10.3390/met1507074610.3390/met15070746 ↗
67. Tsai D-S, Chou C-C (2018) Review of the soft sparking issues in plasma electrolytic oxidation. Metals 8:105. https://doi.org/10.3390/met802010510.3390/met8020105 ↗
68. Rakoch AG, Gladkova AA, Linn Z, Strekalina DM (2015) The evidence of cathodic micro-discharges during plasma electrolytic oxidation of light metallic alloys and micro-discharge intensity depending on pH of the electrolyte. Surf Coat Technol 269:138–144. https://doi.org/10.1016/j.surfcoat.2015.02.02610.1016/j.surfcoat.2015.02.026 ↗
69. Li X-J, Zhang M, Wen S, Mao X, Huo W-G, Guo Y-Y, Wang Y-X (2020) Microstructure and wear resistance of micro-arc oxidation ceramic coatings prepared on 2A50 aluminum alloys. Surf Coat Technol 394:125853. https://doi.org/10.1016/j.surfcoat.2020.12585310.1016/j.surfcoat.2020.125853 ↗
70. Lu JP, Cao GP, Quan GF, Wang C, Zhuang JJ, Song RG (2018) Effects of voltage on microstructure and corrosion resistance of micro-arc oxidation ceramic coatings formed on KBM10 magnesium alloy. J Mater Eng Perform 27:147–154. https://doi.org/10.1007/s11665-017-3088-610.1007/s11665-017-3088-6 ↗
71. Zhao X, Liu D, Lu J, Wei G (2017) Micro-arc oxidation coating formed on anodized aluminum surface under different pulse frequencies. Int J Electrochem Sci 12:7922–7930. https://doi.org/10.20964/2017.09.0210.20964/2017.09.02 ↗
72. Mengesha GA, Chu JP, Lou B-S, Lee J-W (2020) Effects of processing parameters on the corrosion performance of plasma electrolytic oxidation grown oxide on commercially pure aluminum. Metals 10:394. https://doi.org/10.3390/met1003039410.3390/met10030394 ↗
73. Bahador R, Hosseinabadi N, Yaghtin A (2021) Effect of power duty cycle on plasma electrolytic oxidation of A356-Nb2O5 metal matrix composites. J Mater Eng Perform 30:2586–2604. https://doi.org/10.1007/s11665-021-05597-410.1007/s11665-021-05597-4 ↗
74. Dai W, Li C, He D, Jia D, Zhang Y, Tan Z (2019) Influence of duty cycle on fatigue life of AA2024 with thin coating fabricated by micro-arc oxidation. Surf Coat Technol 360:347–357. https://doi.org/10.1016/j.surfcoat.2018.12.11810.1016/j.surfcoat.2018.12.118 ↗
75. Zhi S, Li Y, Yu T, Shi Z, Meng J, Zhao S, Lu H (2025) Effect of ultra-high frequency pulse on micro arc oxidation coating of 6061 aluminum alloy. Mater Today Commun 49:113983. https://doi.org/10.1016/j.mtcomm.2025.11398310.1016/j.mtcomm.2025.113983 ↗
76. Ma C, Ma S, Zhu X, Yan Z, Cheng D, Xue W, Fu J, Liu J (2019) Influence of microarc oxidation power supply frequency on tribology performance of a self-lubricating coating for Al–Si diesel engine pistons. Mater Res Express 6:1165a7. https://doi.org/10.1088/2053-1591/ab4caa10.1088/2053-1591/ab4caa ↗
77. Wang J, Lu H, Sun Z, Xu G, Bai Z, Peng Z (2023) Effect of ultra accurate control of electrolyte temperature on the performance of micro arc oxidation ceramic coatings. Ceram Int 49:33236–33246. https://doi.org/10.1016/j.ceramint.2023.08.03210.1016/j.ceramint.2023.08.032 ↗
78. Mashtalyar DV, Sinebryukhov SL, Imshinetskiy IM, Gnedenkov AS, Nadaraia KV, Ustinov AYu, Gnedenkov SV (2020) Hard wearproof PEO-coatings formed on Mg alloy using TiN nanoparticles. Appl Surf Sci 503:144062. https://doi.org/10.1016/j.apsusc.2019.14406210.1016/j.apsusc.2019.144062 ↗
79. Babaei K, Fattah-alhosseini A, Molaei M (2020) The effects of carbon-based additives on corrosion and wear properties of plasma electrolytic oxidation (PEO) coatings applied on aluminum and its alloys: a review. Surf Interfaces 21:100677. https://doi.org/10.1016/j.surfin.2020.10067710.1016/j.surfin.2020.100677 ↗
80. Yu DL, Jiang B, Qi X, Wang C, Song RG (2024) Effect of electrolyte pH value on microstructure and corrosion resistance of black MAO coating on 6063 aluminum alloy. Mater Today Commun 40:109868. https://doi.org/10.1016/j.mtcomm.2024.10986810.1016/j.mtcomm.2024.109868 ↗
81. Lu X, Mohedano M, Blawert C, Matykina E, Arrabal R, Kainer KU, Zheludkevich ML (2016) Plasma electrolytic oxidation coatings with particle additions – a review. Surf Coat Technol 307:1165–1182. https://doi.org/10.1016/j.surfcoat.2016.08.05510.1016/j.surfcoat.2016.08.055 ↗
82. Zong Y, Cao GP, Hua TS, Cai SW, Song RG (2019) Effects of electrolyte system on the microstructure and properties of MAO ceramics coatings on 7050 high strength aluminum alloy. ACMM 66:812–818. https://doi.org/10.1108/ACMM-02-2019-208310.1108/ACMM-02-2019-2083 ↗
83. Cui S-H, Zhu J-Y, Yang C, Chen P-H, Wu Z-C, Ma Z-Y, Fu RKY, Tian X-B, Fang D-N, Chu PK, Wu Z-Z (2021) Stable discharge mechanism in microarc oxidation and processing in phosphate electrolytes. IEEE Trans Plasma Sci 49:3126–3131. https://doi.org/10.1109/tps.2021.311058110.1109/tps.2021.3110581 ↗
84. Liu X, Zhu L, Liu H, Li W (2014) Investigation of MAO coating growth mechanism on aluminum alloy by two-step oxidation method. Appl Surf Sci 293:12–17. https://doi.org/10.1016/j.apsusc.2013.11.15910.1016/j.apsusc.2013.11.159 ↗
85. Vargas CA, Zuleta AA, Castaño JG, Gómez MA, Botero CA, Tamayo JA (2025) Effect of build direction in Ti6Al4V alloy manufactured by EB-PBF on the corrosion performance of PEO coatings, https://doi.org/10.21203/rs.3.rs-7716426/v1.10.21203/rs.3.rs-7716426/v1 ↗
86. Li Q, Yang W, Liu C, Wang D, Liang J (2017) Correlations between the growth mechanism and properties of micro-arc oxidation coatings on titanium alloy: effects of electrolytes. Surf Coat Technol 316:162–170. https://doi.org/10.1016/j.surfcoat.2017.03.02110.1016/j.surfcoat.2017.03.021 ↗
87. Pak S-N, Yao Z, Ju K-S, Ri C-N, Xia Q (2018) Effect of organic additives on structure and corrosion resistance of MAO coating. Vacuum 151:8–14. https://doi.org/10.1016/j.vacuum.2018.01.04910.1016/j.vacuum.2018.01.049 ↗
88. Lin T-Y, Zhang X-Y, Huang X, Gong X-P, Zhang J-J, Hu X-J (2018) Microstructure and properties of microarc oxidation coating formed on aluminum alloy with compound additives nano-TiO2 and nano-ZnO. Rare Met 37:976–982. https://doi.org/10.1007/s12598-017-0948-z10.1007/s12598-017-0948-z ↗
89. Vinodhini SP, Jasmine CX, Kumaresan P, Anitha G, Joseph RX (2026) Recent developments in MXene-Based nanocomposites for superior corrosion protection and supercapacitor performance. J Power Sources 661:238651. https://doi.org/10.1016/j.jpowsour.2025.23865110.1016/j.jpowsour.2025.238651 ↗
90. Qi X, Gao H, He Y, Su X, Song R (2024) Microstructure and properties of a MAO/PA/MoS2 composite coating formed on 6063 aluminum alloy by micro arc oxidation. Surf Coat Technol 484:130836. https://doi.org/10.1016/j.surfcoat.2024.13083610.1016/j.surfcoat.2024.130836 ↗
91. Qin D, Xu G, Yang Y, Chen S (2018) Multiphase ceramic coatings with high hardness and wear resistance on 5052 aluminum alloy by a microarc oxidation method. ACS Sustain Chem Eng 6:2431–2437. https://doi.org/10.1021/acssuschemeng.7b0388310.1021/acssuschemeng.7b03883 ↗
92. Torskaya E, Shkalei I, Morozov A, Stepanov F, Malyshev V, Svistkov A (2025) Structure, friction and wear of AlZn5.5MgCu based PEO coatings modified by diamond nanoparticles and silver micropowder. Tribol Int 203:110417. https://doi.org/10.1016/j.triboint.2024.11041710.1016/j.triboint.2024.110417 ↗
93. Shokouhfar M, Allahkaram SR (2017) Effect of incorporation of nanoparticles with different composition on wear and corrosion behavior of ceramic coatings developed on pure titanium by micro arc oxidation. Surf Coat Technol 309:767–778. https://doi.org/10.1016/j.surfcoat.2016.10.08910.1016/j.surfcoat.2016.10.089 ↗
94. Malyshev VN, Zorin KM (2007) Features of microarc oxidation coatings formation technology in slurry electrolytes. Appl Surf Sci 254:1511–1516. https://doi.org/10.1016/j.apsusc.2007.07.07910.1016/j.apsusc.2007.07.079 ↗
95. Lu X, Blawert C, Zheludkevich ML, Kainer KU (2015) Insights into plasma electrolytic oxidation treatment with particle addition. Corros Sci 101:201–207. https://doi.org/10.1016/j.corsci.2015.09.01610.1016/j.corsci.2015.09.016 ↗
96. Krishtal MM, Katsman AV, Polunin AV (2022) Effects of silica nanoparticles addition on formation of oxide layers on Al Si alloy by plasma electrolytic oxidation: the origin of stishovite under ambient conditions. Surf Coat Technol 441:128556. https://doi.org/10.1016/j.surfcoat.2022.12855610.1016/j.surfcoat.2022.128556 ↗
97. O’Hara M, Troughton SC, Francis R, Clyne TW (2020) The incorporation of particles suspended in the electrolyte into plasma electrolytic oxidation coatings on Ti and Al substrates. Surf Coat Technol 385:125354. https://doi.org/10.1016/j.surfcoat.2020.12535410.1016/j.surfcoat.2020.125354 ↗
98. Qin D, Xu G, Yang Y, Chen S (2018) Multiphase ceramic coatings with high hardness and wear resistance on 5052 aluminum alloy by a microarc oxidation method. ACS Sustainable Chem Eng 6:2431–2437. https://doi.org/10.1021/acssuschemeng.7b0388310.1021/acssuschemeng.7b03883 ↗
99. Bahramian A, Raeissi K, Hakimizad A (2015) An investigation of the characteristics of Al2O3/TiO2 PEO nanocomposite coating. Appl Surf Sci 351:13–26. https://doi.org/10.1016/j.apsusc.2015.05.10710.1016/j.apsusc.2015.05.107 ↗
100. Li H, Song R, Ji Z (2013) Effects of nano-additive TiO2 on performance of micro-arc oxidation coatings formed on 6063 aluminum alloy. Trans Nonferrous Met Soc China 23:406–411. https://doi.org/10.1016/S1003-6326(13)62477-210.1016/S1003-6326(13)62477-2 ↗