DataVXJournal of Materials SciencePaper
journal article·2026-02

Development and applications of cellulose-based separators for energy storage devices

Wenlong Mu, Xinrui Zhao, Liangyu Chen, Junwei Jiang, Lianqin Wang, Jingxin Na

Journal of Materials Science· Volume 61· Issue 6
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advanced Cellulose Research Studies · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Boriboon D, Vongsetskul T, Limthongkul P et al (2018) Cellulose ultrafine fibers embedded with titania particles as a high performance and eco-friendly separator for lithium-ion batteries. Carbohydr Polym 189:145–151. https://doi.org/10.1016/j.carbpol.2018.01.07710.1016/j.carbpol.2018.01.077 ↗
2. Wang Q, Jiang B, Li B et al (2016) A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles. Renew Sustain Energy Rev 64:106–128. https://doi.org/10.1016/j.rser.2016.05.03310.1016/j.rser.2016.05.033 ↗
3. Pan R, Cheung O, Wang Z et al (2016) Mesoporous cladophora cellulose separators for lithium-ion batteries. J Power Sources 321:185–192. https://doi.org/10.1016/j.jpowsour.2016.04.11510.1016/j.jpowsour.2016.04.115 ↗
4. Xu J, Wang L, Guan J et al (2016) Coupled effect of strain rate and solvent on dynamic mechanical behaviors of separators in lithium ion batteries. Mater Des 95:319–328. https://doi.org/10.1016/j.matdes.2016.01.08210.1016/j.matdes.2016.01.082 ↗
5. Gor G, Cannarella J, Leng C et al (2015) Swelling and softening of lithium-ion battery separators in electrolyte solvents. J Power Sources 294:167–172. https://doi.org/10.1016/j.jpowsour.2015.06.02810.1016/j.jpowsour.2015.06.028 ↗
6. Du H, Liu W, Zhang M et al (2019) Cellulose nanocrystals and cellulose nanofibrils based hydrogels for biomedical applications. Carbohydr Polym 209:130–144. https://doi.org/10.1016/j.carbpol.2019.01.02010.1016/j.carbpol.2019.01.020 ↗
7. Hu L, Du H, Liu C et al (2019) Comparative evaluation of the efficient conversion of corn husk filament and corn husk powder to valuable materials via a sustainable and clean biorefinery process. ACS Sustain Chem Eng 7:1327–1336. https://doi.org/10.1021/acssuschemeng.8b0501710.1021/acssuschemeng.8b05017 ↗
8. Liu W, Du H, Liu H et al (2020) Highly efficient and sustainable preparation of carboxylic and thermostable cellulose nanocrystals via FeCl3-catalyzed innocuous citric acid hydrolysis. ACS Sustain Chem Eng 8:16691–16700. https://doi.org/10.1021/acssuschemeng.0c0656110.1021/acssuschemeng.0c06561 ↗
9. Yan W, Liu J, Zheng X et al (2023) Wood-derived high-performance cellulose structural materials. E-Polym 23:20230010. https://doi.org/10.1515/epoly-2023-001010.1515/epoly-2023-0010 ↗
10. Isik M, Sardon H, Mecerreyes D (2014) Ionic liquids and cellulose: dissolution, chemical modification and preparation of new cellulosic materials. Int J Mol Sci 15:11922–11940. https://doi.org/10.3390/ijms15071192210.3390/ijms150711922 ↗
11. Li S, Zhu W, Tang Q et al (2021) Mini review on cellulose-based composite separators for lithium-ion batteries: recent progress and perspectives. Energy Fuels 35:12938–12947. https://doi.org/10.1021/acs.energyfuels.1c0204910.1021/acs.energyfuels.1c02049 ↗
12. Cheng C, Yang R, Wang Y et al (2023) A bacterial cellulose-based separator with tunable pore size for lithium-ion batteries. Carbohydr Polym 304:120489. https://doi.org/10.1016/j.carbpol.2022.12048910.1016/j.carbpol.2022.120489 ↗
13. Zhang Z, Li Y, Cui X et al (2023) Understanding the advantageous features of bacterial cellulose-based separator in Li-S battery. Adv Mater Interfaces 10:202201730. https://doi.org/10.1002/admi.20220173010.1002/admi.202201730 ↗
14. Song H, Yang J, Yang Y et al (2022) Characterization of cellulose-nanofiber-modified fibrillated lyocell fiber separator. Bioresour 17:4689–4704. https://doi.org/10.15376/biores.17.3.4689-470410.15376/biores.17.3.4689-4704 ↗
15. Dai X, Zhang X, Wen J et al (2022) Research progress on high-temperature resistant polymer separators for lithium-ion batteries. Energy Storage Mater 51:638–659. https://doi.org/10.1016/j.ensm.2022.07.01110.1016/j.ensm.2022.07.011 ↗
16. Yang J, Zhao X, Zhang W et al (2023) “Pore-hopping” ion transport in cellulose-based separator towards high-performance sodium-ion batteries. Angew Chem Int Ed 62:e202300258. https://doi.org/10.1002/anie.20230025810.1002/anie.202300258 ↗
17. Wang S, Zhang D, Shao Z et al (2019) Cellulosic materials-enhanced sandwich structure-like separator via electrospinning towards safer lithium-ion battery. Carbohydr Polym 214:328–336. https://doi.org/10.1016/j.carbpol.2019.03.04910.1016/j.carbpol.2019.03.049 ↗
18. Xue J, Song F, Yin X et al (2015) Let it shine: a transparent and photo luminescent foldable nanocellulose/quantum dot paper. ACS Appl Mater Interfaces 7:10076–10079. https://doi.org/10.1021/acsami.5b0201110.1021/acsami.5b02011 ↗
19. Wang N, Liu W, Liao H et al (2023) Pure cellulose nanofiber separator with high ionic conductivity and cycling stability for lithium-ion batteries. Int J Biol Macromol 250:126078. https://doi.org/10.1016/j.ijbiomac.2023.12607810.1016/j.ijbiomac.2023.126078 ↗
20. Jonoobi M, Oladi R, Davoudpour Y et al (2015) Different preparation methods and properties of nanostructured cellulose from various natural resources and residues: a review. Cellulose 22:935–969. https://doi.org/10.1007/s10570-015-0551-010.1007/s10570-015-0551-0 ↗
21. Li H, Cao L, Zhang H et al (2022) Intertwined carbon networks derived from Polyimide/Cellulose composite as porous electrode for symmetrical supercapacitor. J Colloid Interface Sci 609:179–187. https://doi.org/10.1016/j.jcis.2021.11.18810.1016/j.jcis.2021.11.188 ↗
22. Qian J, Chen Q, Hong M et al (2022) Toward stretchable batteries: 3D-printed deformable electrodes and separator enabled by nanocellulose. Mater Today 54:18–26. https://doi.org/10.1016/j.mattod.2022.02.01510.1016/j.mattod.2022.02.015 ↗
23. Liu Y, Zhang M, Gao Y et al (2022) Regulate the reaction kinetic rate of lithium-sulfur battery by rational designing of TEMPO-oxidized cellulose nanofibers/rGO porous aerogel with monolayer MXene coating. J Alloys Compd 898:162821. https://doi.org/10.1016/j.jallcom.2021.16282110.1016/j.jallcom.2021.162821 ↗
24. de Amorim J, de Souza K, Duarte C et al (2020) Plant and bacterial nanocellulose: production, properties and applications in medicine, food, cosmetics, electronics and engineering. A review. Environ Chem Lett 18:851–869. https://doi.org/10.1007/s10311-020-00989-910.1007/s10311-020-00989-9 ↗
25. Fernandes A, Cruz-Lopes L, Esteves B et al (2023) Nanotechnology Applied to Cellulosic Materials. Materials 16:3104. https://doi.org/10.3390/ma1608310410.3390/ma16083104 ↗
26. Zhang T, Yang L, Yan X et al (2018) Recent advances of cellulose-based materials and their promising application in sodium-ion batteries and capacitors. Small 14:1802444. https://doi.org/10.1002/smll.20180244410.1002/smll.201802444 ↗
27. Jiang L, Huang X, Tian C et al (2023) Preparation and characterization of porous cellulose acetate nanofiber hydrogels. Gels 9:484. https://doi.org/10.3390/gels906048410.3390/gels9060484 ↗
28. Nechyporchuk O, Belgacem M, Bras J (2016) Production of cellulose nanofibrils: a review of recent advances. Ind Crops Prod 93:2–25. https://doi.org/10.1016/j.indcrop.2016.02.01610.1016/j.indcrop.2016.02.016 ↗
29. Refate A, Mohamed Y, Mohamed M et al (2023) Influence of electrospinning parameters on biopolymers nanofibers, with emphasis on cellulose & chitosan. Heliyon 9:e17051. https://doi.org/10.1016/j.heliyon.2023.e1705110.1016/j.heliyon.2023.e17051 ↗
30. Jiang F, Li T, Li Y et al (2018) Wood-based nanotechnologies toward sustainability. Adv Mater 30:1703453. https://doi.org/10.1002/adma.20170345310.1002/adma.201703453 ↗
31. Luan P, Zhao X, Copenhaver K et al (2022) Turning natural herbaceous fibers into advanced materials for sustainability. Adv Fiber Mater 4:736–757. https://doi.org/10.1007/s42765-022-00151-w10.1007/s42765-022-00151-w ↗
32. Moon S, Heo J, Jeon J et al (2021) High crystallinity of tunicate cellulose nanofibers for high-performance engineering films. Carbohydr Polym 254:117470. https://doi.org/10.1016/j.carbpol.2020.11747010.1016/j.carbpol.2020.117470 ↗
33. Guo T, Song J, Jin Y et al (2019) Thermally stable and green cellulose-based composites strengthened by styrene-co-acrylate latex for lithium-ion battery separators. Carbohydr Polym 206:801–810. https://doi.org/10.1016/j.carbpol.2018.11.02510.1016/j.carbpol.2018.11.025 ↗
34. Zhou H, Gu J, Zhang W et al (2021) Rational design of cellulose nanofibrils separator for sodium-ion batteries. Molecules 26:5539. https://doi.org/10.3390/molecules2618553910.3390/molecules26185539 ↗
35. Li X, Wan C, Tao T et al (2024) An overview of the development status and applications of cellulose-based functional materials. Cellulose 31:61–99. https://doi.org/10.1007/s10570-023-05616-810.1007/s10570-023-05616-8 ↗
36. Zhang H, Wang X, Liang Y (2015) Preparation and characterization of a lithium-ion battery separator from cellulose nanofibers. Heliyon 1:e00032. https://doi.org/10.1016/j.heliyon.2015.e0003210.1016/j.heliyon.2015.e00032 ↗
37. Li J, Dai L, Wang Z et al (2022) Cellulose nanofiber separator for suppressing shuttle effect and Li dendrite formation in lithium-sulfur batteries. J Energy Chem 67:736–744. https://doi.org/10.1016/j.jechem.2021.11.01710.1016/j.jechem.2021.11.017 ↗
38. Lv D, Chai J, Wang P et al (2021) Pure cellulose lithium-ion battery separator with tunable pore size and improved working stability by cellulose nanofibrils. Carbohydr Polym 251:116975. https://doi.org/10.1016/j.carbpol.2020.11697510.1016/j.carbpol.2020.116975 ↗
39. Lupascu R, Ghica M, Dinu-Pîrvu C et al (2022) An overview regarding microbial aspects of production and applications of bacterial cellulose. Materials 15:676. https://doi.org/10.3390/ma1502067610.3390/ma15020676 ↗
40. Brandes R, Carminatti C, Mikowski A et al (2017) A mini-review on the progress of spherical bacterial cellulose production. J Nano Res 45:142–154. https://doi.org/10.4028/www.scientific.net/JNanoR.45.14210.4028/www.scientific.net/JNanoR.45.142 ↗
41. Sulaeva I, Henniges U, Rosenau T et al (2015) Bacterial cellulose as a material for wound treatment: properties and modifications. A review. Biotechnol Adv 33:1547–1571. https://doi.org/10.1016/j.biotechadv.2015.07.00910.1016/j.biotechadv.2015.07.009 ↗
42. Yang Y, Huang C, Gao G et al (2020) Aramid nanofiber/bacterial cellulose composite separators for lithium-ion batteries. Carbohydr Polym 247:116702. https://doi.org/10.1016/j.carbpol.2020.11670210.1016/j.carbpol.2020.116702 ↗
43. Zhu C, Zhang J, Qiu S et al (2021) Tailoring the pore size of polyphenylene sulfide nonwoven with bacterial cellulose (BC) for heat-resistant and high-wettability separator in lithium -ion battery. CompComm 24:100659. https://doi.org/10.1016/j.coco.2021.10065910.1016/j.coco.2021.100659 ↗
44. Peng X, Zhang Y, Gong W et al (2025) Redox-active Janus separator based on polyaniline nanosheets and bacterial cellulose nanofibers for lithium-ion batteries. Int J Biol Macromol 302:140536. https://doi.org/10.1016/j.ijbiomac.2025.14053610.1016/j.ijbiomac.2025.140536 ↗
45. Huang Y, Wang B, Xie P et al (2025) Bacterial cellulose mixed with glass fiber as a separator to achieve long cycle life of aqueous zinc-ion batteries. J Energy Storage 129:117395. https://doi.org/10.1016/j.est.2025.11739510.1016/j.est.2025.117395 ↗
46. Ruka D, Simon G, Dean K (2014) Harvesting fibrils from bacterial cellulose pellicles and subsequent formation of biodegradable poly-3-hydroxybutyrate nanocomposites. Cellulose 21:4299–4308. https://doi.org/10.1007/s10570-014-0415-z10.1007/s10570-014-0415-z ↗
47. Cao S, Feng X, Song Y et al (2015) Integrated fast assembly of free-standing lithium titanate/carbon nanotube/cellulose nanofiber hybrid network film as flexible paper-electrode for lithium-ion batteries. ACS Appl Mater Interfaces 7:10695–10701. https://doi.org/10.1021/acsami.5b0269310.1021/acsami.5b02693 ↗
48. Casas X, Niederberger M, Lizundia E (2020) A sodium-ion battery separator with reversible voltage response based on water-soluble cellulose derivatives. ACS Appl Mater Interfaces 12:29264–29274. https://doi.org/10.1021/acsami.0c0526210.1021/acsami.0c05262 ↗
49. Lee H, Kang S (2022) Improvement of stability for cellulose polymer by calcium oxide for application to porous materials. Cellulose 29:8319–8327. https://doi.org/10.1007/s10570-022-04767-410.1007/s10570-022-04767-4 ↗
50. Chen H, Wang Z, Feng Y et al (2023) Cellulose-based separators for lithium batteries: source, preparation and performance. Chem Eng J 471:144593. https://doi.org/10.1016/j.cej.2023.14459310.1016/j.cej.2023.144593 ↗
51. Chen Y, Qiu L, Ma X et al (2020) Electrospun cellulose polymer nanofiber membrane with flame resistance properties for lithium-ion batteries. Carbohydr Polym 234:115907. https://doi.org/10.1016/j.carbpol.2020.11590710.1016/j.carbpol.2020.115907 ↗
52. Xu P, Zhang D, Shao Z et al (2021) Cellulose acetate-based separators prepared by a reversible acetylation process for high-performance lithium-ion batteries. J Appl Polym Sci 138:e50738. https://doi.org/10.1002/app.5073810.1002/app.50738 ↗
53. Yang N, Liang Y, Jia S (2021) Enhanced thermal stability and electrochemical performance of Polyacrylonitrile/Cellulose Acetate-electrospun fiber membrane by Boehmite nanoparticles: application to high-performance lithium-ion batteries. Macromol Mater Eng 306:2100300. https://doi.org/10.1002/mame.20210030010.1002/mame.202100300 ↗
54. Chen W, Zhang L, Liu C et al (2018) Electrospun flexible cellulose acetate-based separators for sodium-ion batteries with ultralong cycle stability and excellent wettability: the role of interface chemical groups. ACS Appl Mater Interfaces 10:23883–23890. https://doi.org/10.1021/acsami.8b0670610.1021/acsami.8b06706 ↗
55. Liu Y, Lv S, Zhang M et al (2023) UV-photopolymerized cellulose acetate-acrylate membranes for lithium-ion battery separator. Colloids Surf A 667:131359. https://doi.org/10.1016/j.colsurfa.2023.13135910.1016/j.colsurfa.2023.131359 ↗
56. Darmawan D, Yulianti E, Sabrina Q et al (2024) Fabrication of solid polymer electrolyte based on carboxymethyl cellulose complexed with lithium acetate salt as lithium-ion battery separator. Polym Compos 45:2032–2049. https://doi.org/10.1002/pc.2790210.1002/pc.27902 ↗
57. Ndruru S, Pramono E, Wahyuningrum D et al (2021) Preparation and characterization of biopolymer blend electrolyte membranes based on derived celluloses for lithium-ion batteries separator. Bull Mater Sci 44:104. https://doi.org/10.1007/s12034-021-02369-710.1007/s12034-021-02369-7 ↗
58. Huttunen M, Nygren L, Kinnarinen T et al (2017) Specific energy consumption of cake dewatering with vacuum filters. Miner Eng 100:144–154. https://doi.org/10.1016/j.mineng.2016.10.02510.1016/j.mineng.2016.10.025 ↗
59. Yang J, Wang X, Parekh B (2010) Improved techniques for hyperbaric filtration of fine coal slurry. Int J Coal Prep Util 30:32–43. https://doi.org/10.1080/1939269100377643410.1080/19392691003776434 ↗
60. Fan Y, Dong X, Li H (2015) Dewatering effect of fine coal slurry and filter cake structure based on particle characteristics. Vacuum 114:54–57. https://doi.org/10.1016/j.vacuum.2015.01.00310.1016/j.vacuum.2015.01.003 ↗
61. Lee J, Kim H, Jeong S et al (2025) Enhanced lithium-ion battery separators via facile fabrication of sulfonated cellulose nanofiber. Cellulose 32:277–294. https://doi.org/10.1007/s10570-024-06274-010.1007/s10570-024-06274-0 ↗
62. Yang Q, Fujisawa S, Saito T et al (2012) Improvement of mechanical and oxygen barrier properties of cellulose films by controlling drying conditions of regenerated cellulose hydrogels. Cellulose 19:695–703. https://doi.org/10.1007/s10570-012-9683-710.1007/s10570-012-9683-7 ↗
63. Zhao X, Wang W, Huang C et al (2021) A novel cellulose membrane from cattail fibers as separator for Li-ion batteries. Cellulose 28:9309–9321. https://doi.org/10.1007/s10570-021-04110-310.1007/s10570-021-04110-3 ↗
64. Feng X, Wang M, Zheng J et al (2023) Facile preparation of higher conductivity porous polyimide-based separators by phase inversion and its overcharge-sensitive modification for lithium-ion batteries. Batter Supercaps 6:e202300244. https://doi.org/10.1002/batt.20230024410.1002/batt.202300244 ↗
65. Li Y, Wang X, Liang J et al (2020) Design of a high performance zeolite/polyimide composite separator for lithium-ion batteries. Polymers 12:764. https://doi.org/10.3390/polym1204076410.3390/polym12040764 ↗
66. Bolloli M, Antonelli C, Molméret Y et al (2016) Nanocomposite poly(vynilidene fluoride)/nanocrystalline cellulose porous membranes as separators for lithium-ion batteries. Electrochim Acta 214:38–48. https://doi.org/10.1016/j.electacta.2016.08.02010.1016/j.electacta.2016.08.020 ↗
67. Liu Y, Zhang Z, Du X et al (2023) Poly(ether ether ketone) conferred polyolefin separators with high dimensional thermal stability for lithium-ion batteries. ACS Appl Mater Interfaces 15:37354–37360. https://doi.org/10.1021/acsami.3c0533610.1021/acsami.3c05336 ↗
68. Zhang K, Chen H, Huang H et al (2023) Water-soluble ammonium polyphosphate synchronously enables mechanically robust and flame-retardant cellulose composite separator for high safety lithium batteries. J Power Sources 558:232627. https://doi.org/10.1016/j.jpowsour.2023.23262710.1016/j.jpowsour.2023.232627 ↗
69. Zhang J, Zhou A, Deng A et al (2015) Pore architecture and cell viability on freeze dried 3D recombinant human collagen-peptide (RHC)-chitosan scaffolds. Mater Sci Eng C Mater Biol 49:174–182. https://doi.org/10.1016/j.msec.2014.12.07610.1016/j.msec.2014.12.076 ↗
70. Xie Y, Pan Y, Cai P (2020) Novel PVA-based porous separators prepared via freeze-drying for enhancing performance of lithium-ion batteries. Ind Eng Chem Res 59:15242–15254. https://doi.org/10.1021/acs.iecr.0c0218210.1021/acs.iecr.0c02182 ↗
71. Sabrina Q, Ratri C, Hardiansyah A et al (2021) Preparation and characterization of nanofibrous cellulose as solid polymer electrolyte for lithium-ion battery applications. RSC Adv 11:22929–22936. https://doi.org/10.1039/d1ra03480d10.1039/d1ra03480d ↗
72. Liu W, Xie W, Wu L et al (2020) Regulating the pore structure of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)oxidized cellulose membranes: impact of drying method and organic solvent processing. Polym Int 69:964–973. https://doi.org/10.1002/pi.605010.1002/pi.6050 ↗
73. Yang Z, Miyahara H, Takeo J et al (2012) Ingestion of a single serving of saury alters postprandial levels of plasma n-3 polyunsaturated fatty acids and long-chain monounsaturated fatty acids in healthy human adults. Lipids Health Dis 11:95. https://doi.org/10.1186/1476-511x-11-9510.1186/1476-511x-11-95 ↗
74. Huang Z, Zhang Y, Kotaki M et al (2003) A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Compos Sci Technol 63:2223–2253. https://doi.org/10.1016/s0266-3538(03)00178-710.1016/s0266-3538(03)00178-7 ↗
75. Brown T, Daltona P, Hutmacher D (2016) Melt electrospinning today: an opportune time for an emerging polymer process. Prog Polym Sci 56:116–166. https://doi.org/10.1016/j.progpolymsci.2016.01.00110.1016/j.progpolymsci.2016.01.001 ↗
76. Sheng J, Tong S, He Z et al (2017) Recent developments of cellulose materials for lithium-ion battery separators. Cellulose 24:4103–4122. https://doi.org/10.1007/s10570-017-1421-810.1007/s10570-017-1421-8 ↗
77. Zhang M, Li M, Chang Z et al (2017) A sandwich PVDF/HEC/PVDF gel polymer electrolyte for lithium ion battery. Electrochim Acta 245:752–759. https://doi.org/10.1016/j.electacta.2017.05.15410.1016/j.electacta.2017.05.154 ↗
78. Kang W, Ma X, Zhao H et al (2016) Electrospun cellulose acetate/poly(vinylidene fluoride) nanofibrous membrane for polymer lithium-ion batteries. J Solid State Electrochem 20:2791–2803. https://doi.org/10.1007/s10008-016-3271-y10.1007/s10008-016-3271-y ↗
79. Yanilmaz M, Lu Y, Zhu J et al (2016) Silica/polyacrylonitrile hybrid nanofiber membrane separators via sol-gel and electrospinning techniques for lithium-ion batteries. J Power Sources 313:205–212. https://doi.org/10.1016/j.jpowsour.2016.02.08910.1016/j.jpowsour.2016.02.089 ↗
80. Li X, Zhu L, Zhu B et al (2011) High-flux and anti-fouling cellulose nanofiltration membranes prepared via phase inversion with ionic liquid as solvent. Sep Purif Technol 83:66–73. https://doi.org/10.1016/j.seppur.2011.09.01210.1016/j.seppur.2011.09.012 ↗
81. Anokhina T, Pleshivtseva T, Ignatenko V et al (2017) Fabrication of composite nanofiltration membranes from cellulose solutions in an Emim OAc-DMSO mixture. Pet Chem 57:477–482. https://doi.org/10.1134/s096554411706002010.1134/s0965544117060020 ↗
82. Abushammala H, Mao J (2019) A review of the surface modification of cellulose and nanocellulose using aliphatic and aromatic mono- and di-isocyanates. Molecules 24:2782. https://doi.org/10.3390/molecules2415278210.3390/molecules24152782 ↗
83. Deng S, Meng W, Fan C et al (2024) Enabling further organic electrolyte infiltration of cellulose-based separators via defect-rich polypyrrole modification for high sodium ion transport in sodium metal batteries. ACS Appl Mater Interfaces 16:4708–4718. https://doi.org/10.1021/acsami.3c1622010.1021/acsami.3c16220 ↗
84. Tang Z, Lin X, Yu M et al (2024) Recent advances in TEMPO-oxidized cellulose nanofibers: oxidation mechanism, characterization, properties and applications. Int J Biol Macromol 259:129081. https://doi.org/10.1016/j.ijbiomac.2023.12908110.1016/j.ijbiomac.2023.129081 ↗
85. Lu H, Hagberg J, Lindbergh G et al (2017) Li4Ti5O12 flexible, lightweight electrodes based on cellulose nanofibrils as binder and carbon fibers as current collectors for Li-ion batteries. Nano Energy 39:140–150. https://doi.org/10.1016/j.nanoen.2017.06.04310.1016/j.nanoen.2017.06.043 ↗
86. Nair J, Gerbaldi C, Chiappone A et al (2009) UV-cured polymer electrolyte membranes for Li-cells: improved mechanical properties by a novel cellulose reinforcement. Electrochem Commun 11:1796–1798. https://doi.org/10.1016/j.elecom.2009.07.02110.1016/j.elecom.2009.07.021 ↗
87. Sun G, Dong G, Kong L et al (2018) Robust polyimide nanofibrous membrane with porous-layer-coated morphology by in situ self-bonding and micro-crosslinking for lithium-ion battery separator. Nanoscale 10:22439–22447. https://doi.org/10.1039/c8nr07548d10.1039/c8nr07548d ↗
88. Dang H, Zhang X, Long Z et al (2019) Ecofriendly preparation of cellulose nanocrystal-coated polyimide fiber: strategy for improved wettability. Langmuir 35:10890–10899. https://doi.org/10.1021/acs.langmuir.9b0173610.1021/acs.langmuir.9b01736 ↗
89. Deng J, Cao D, Yang X et al (2022) Cross-linked cellulose/carboxylated polyimide nanofiber separator for lithium-ion battery application. Chem Eng J 433:133934. https://doi.org/10.1016/j.cej.2021.13393410.1016/j.cej.2021.133934 ↗
90. Dai J, Shi C, Li C et al (2016) A rational design of separator with substantially enhanced thermal features for lithium-ion batteries by the polydopamine-ceramic composite modification of polyolefin membranes. Energy Environ Sci 9:3252–3261. https://doi.org/10.1039/c6ee01219a10.1039/c6ee01219a ↗
91. Barclay T, Hegab H, Clarke S et al (2017) Versatile surface modification using polydopamine and related polycatecholamines: chemistry, structure, and applications. Adv Mater Interfaces 4:1601192. https://doi.org/10.1002/admi.20160119210.1002/admi.201601192 ↗
92. Liu T, Kim K, Lee B et al (2017) Self-polymerized dopamine as an organic cathode for Li- and Na-ion batteries. Energy Environ Sci 10:205–215. https://doi.org/10.1039/c6ee02641a10.1039/c6ee02641a ↗
93. Xu Q, Kong Q, Liu Z et al (2014) Polydopamine-coated cellulose microfibrillated membrane as high performance lithium-ion battery separator. RSC Adv 4:7845–7850. https://doi.org/10.1039/c3ra45879b10.1039/c3ra45879b ↗
94. Zhou M, Zhang Z, Xu J et al (2020) PDA modified commercial paper separator engineering with excellent lithiophilicity and mechanical strength for lithium metal batteries. J Electroanal Chem 868:114195. https://doi.org/10.1016/j.jelechem.2020.11419510.1016/j.jelechem.2020.114195 ↗
95. Liu S, Ke D, Zeng J et al (2011) Construction of inorganic nanoparticles by micro-nano-porous structure of cellulose matrix. Cellulose 18:945–956. https://doi.org/10.1007/s10570-011-9556-510.1007/s10570-011-9556-5 ↗
96. Kim J, Kim J, Choi E et al (2013) Colloidal silica nanoparticle-assisted structural control of cellulose nanofiber paper separators for lithium-ion batteries. J Power Sources 242:533–540. https://doi.org/10.1016/j.jpowsour.2013.05.14210.1016/j.jpowsour.2013.05.142 ↗
97. Xie W, Dang Y, Wu L et al (2020) Experimental and molecular simulating study on promoting electrolyte-immersed mechanical properties of cellulose/lignin separator for lithium-ion battery. Polym Test 90:106773. https://doi.org/10.1016/j.polymertesting.2020.10677310.1016/j.polymertesting.2020.106773 ↗
98. Wang A, Sun Z, Ning R et al (2019) Study on cellulose/nylon 6 lithium battery separators modification by polyacrylonitrile in ionic liquid Emim Ac. AIP Adv 9:085027. https://doi.org/10.1063/1.511628610.1063/1.5116286 ↗
99. Guo H, Zhong S, Chen L et al (2022) Study on PVDF-HFP/PMMA/CMC blended polymer as membrane for lithium-ion batteries. Int J Electrochem Sci 17:220145. https://doi.org/10.20964/2022.01.4710.20964/2022.01.47 ↗
100. Zhang Z, Zhou M, Yu J et al (2021) Poly(vinylidene fluoride) modified commercial paper as a separator with enhanced thermal stability and electrolyte affinity for lithium-ion battery. Energy Environ Mater 4:664–670. https://doi.org/10.1002/eem2.1215310.1002/eem2.12153 ↗