DataVXJournal of Materials SciencePaper
journal article·2025-06

Preparation of lightweight and energy absorption polyurethane power battery sealants

Xiongzhuang Gao, Xingyuan Ma, Xinyuan Xue, Lu Lin

Journal of Materials Science· Volume 60· Issue 21
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Energy storage

OpenAlex topics: Polymer composites and self-healing · Silicone and Siloxane Chemistry · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. Mahmoudzadeh Andwari A, Pesiridis A, Rajoo S, Martinez-Botas R, Esfahanian V (2017) A review of battery electric vehicle technology and readiness levels. Renew Sust Enger Rev 78:414–430. https://doi.org/10.1016/j.rser.2017.03.13810.1016/j.rser.2017.03.138 ↗
2. Li S, Ma J, Zhao X, Zhang K, Jiao Z, Xue Q (2024) Towards intelligent electric vehicle power batteries and multi-scenario application vehicle operation safety charging strategies: a review. Sustain Energ Fuels 8:3496–3523. https://doi.org/10.1039/D4SE00291A10.1039/D4SE00291A ↗
3. Yang D, Liu H, Li M, Xu H (2023) Data-driven analysis of battery electric vehicle energy consumption under real-world temperature conditions. J Energy Storage 27:108590. https://doi.org/10.1016/j.est.2023.10859010.1016/j.est.2023.108590 ↗
4. Zhang W, Xu J (2022) Advanced lightweight materials for automobiles: a review. Mater Des 221:110994. https://doi.org/10.1016/j.matdes.2022.11099410.1016/j.matdes.2022.110994 ↗
5. Wang J, Huang T, Lei F, Song L, Luan J, Tang Z (2022) Investigation of the physical and mechanical properties of lightweight particleboard bonded by foamable polyurethane adhesive. Eur J Wood Wood Prod 80:213–222. https://doi.org/10.1007/s00107-021-01744-910.1007/s00107-021-01744-9 ↗
6. Zhang H, Wang X, Yang L, Feng L, Hui D, Zhai Y (2009) Structural lightweight design of thermoplastic polyurethane elasticity fabricated by fused deposition modeling. J Mater Eng Perform 33(2024):11992–12001. https://doi.org/10.1007/s11665-023-08797-210.1007/s11665-023-08797-2 ↗
7. Yu S, Li X, Zhao Y, Zou M (2020) A novel lightweight polyurethane composite for application on ultra-high-voltage insulator core filler. Polymers 12:2737. https://doi.org/10.3390/polym1211273710.3390/polym12112737 ↗
8. Cimprich A, Sadayappan K, Young SB (2023) Lightweighting electric vehicles: scoping review of life cycle assessments. J Clean Prod 433:139692. https://doi.org/10.1016/j.jclepro.2023.13969210.1016/j.jclepro.2023.139692 ↗
9. Zeng X, Li M, Abd El-Hady D, Alshitari W, Al-Bogami AS, Lu J, Amine K (2019) Commercialization of lithium battery technologies for electric vehicles. Adv Energy Mater. 9:1900161. https://doi.org/10.1002/aenm.20190016110.1002/aenm.201900161 ↗
10. Pu Y, Ma F, Zhang J, Yang M (2018) Optimal lightweight material selection for automobile applications considering multi-perspective indices. IEEE Access 6:8591–8598. https://doi.org/10.1109/ACCESS.2018.280490410.1109/ACCESS.2018.2804904 ↗
11. Higaki Y, Suzuki K, Oniki Y, White KL, Ohta N, Takahara A (2015) Molecular aggregation structure evolution during stretching of environmentally benign lysine-based segmented poly(urethane-urea)s. Polymer 78:173–179. https://doi.org/10.1016/j.polymer.2015.10.00210.1016/j.polymer.2015.10.002 ↗
12. Li X, Lu Y, Wang H, Pöselt E, Eling B, Men Y (2017) Crystallization of hard segments in MDI/BD-based polyurethanes deformed at elevated temperature and their dependence on the MDI/BD content. Eur Polym J 97:423–436. https://doi.org/10.1016/j.eurpolymj.2017.10.01410.1016/j.eurpolymj.2017.10.014 ↗
13. Zhao Z, Jiang H, Li X, Zhang X, Su X, Zou M (2024) Research on the dynamic compressibility of polyurethane microcellular elastomer and its application for impact resistance, Chinese. J Polym Sci 42:1185–1197. https://doi.org/10.57760/sciencedb.j00189.0004510.57760/sciencedb.j00189.00045 ↗
14. Yilgör I, Yilgör E, Wilkes GL (2015) Critical parameters in designing segmented polyurethanes and their effect on morphology and properties: a comprehensive review. Polymer 58:A1–A36. https://doi.org/10.1016/j.polymer.2014.12.01410.1016/j.polymer.2014.12.014 ↗
15. Xu C, Ding S, Liu X, Wang F, Shi Y, Wang X, Wang Z (2022) Superhigh strength polyurethane materials with oriented microdomains produced through mechanical deformation. Polymer 253:124968. https://doi.org/10.1016/j.polymer.2022.12496810.1016/j.polymer.2022.124968 ↗
16. Gao W, Bie M, Liu F, Chang P, Quan Y (2017) Self-healable and reprocessable polysulfide sealants prepared from liquid polysulfide oligomer and epoxy resin. ACS Appl Mater Interfaces 9:15789–15808. https://doi.org/10.1021/acsami.7b0528510.1021/acsami.7b05285 ↗
17. Li X, Huang Q, Deng J, Zhang G, Zhong Z, He F (2020) Evaluation of lithium battery thermal management using sealant made of boron nitride and silicone. J Power Sources 451:227820. https://doi.org/10.1016/j.jpowsour.2020.22782010.1016/j.jpowsour.2020.227820 ↗
18. Du J, Chang Q, Xu C, Liu B, Deng Y, Jia X, Huai X (2024) Eco-friendly polyurethane thermally conductive composites with enhanced mechanical strength and toughness based on isocyanate index regulating for cell-to-pack battery system. Eur Polym J 213:113083. https://doi.org/10.1016/j.eurpolymj.2024.11308310.1016/j.eurpolymj.2024.113083 ↗
19. Min Jee S, Ahn C, Hyuk Park J, Ann Kim T, Park M (2020) Solvent-free encapsulation of curing agents for high performing one-component epoxy adhesives. Compos. Part B-Eng 202:108438. https://doi.org/10.1016/j.compositesb.2020.10843810.1016/j.compositesb.2020.108438 ↗
20. Gubbels F (2024) An overview of the chemistry of condensation curing silicone sealants and adhesives. Int J Adhes Adhes 132:103728. https://doi.org/10.1016/j.ijadhadh.2024.10372810.1016/j.ijadhadh.2024.103728 ↗
21. Xie F, Zhang T, Bryant P, Kurusingal V, Colwell JM, Laycock B (2019) Degradation and stabilization of polyurethane elastomers. Prog Polym Sci 90:211–268. https://doi.org/10.1016/j.progpolymsci.2018.12.00310.1016/j.progpolymsci.2018.12.003 ↗
22. Zhou X, Li Y, Fang C, Li S, Cheng Y, Lei W, Meng X (2015) Recent advances in synthesis of waterborne polyurethane and their application in water-based ink: a review. J Mater Sci Technol 31:708–722. https://doi.org/10.1016/j.jmst.2015.03.00210.1016/j.jmst.2015.03.002 ↗
23. Pielichowska K, Bieda J, Szatkowski P (2016) Polyurethane/graphite nano-platelet composites for thermal energy storage. Renew Energy 91:456–465. https://doi.org/10.1016/j.renene.2016.01.07610.1016/j.renene.2016.01.076 ↗
24. Adnan S, Tuan Noor MT, ’Ain NH, Devi KP, Mohd NS, Shoot Kian Y, Idris ZB, Campara I, Schiffman CM, Pietrzyk K, Sendijarevic V (2017) Impact of the hard-segment concentration on highly resilient polyurethane foams based on palm olein polyol. J Appl Polym Sci 134:45440. https://doi.org/10.1002/app.4544010.1002/app.45440 ↗
25. Eceiza A, Martin MD, de la Caba K, Kortaberria G, Gabilondo N, Corcuera MA, Mondragon I (2008) Thermoplastic polyurethane elastomers based on polycarbonate diols with different soft segment molecular weight and chemical structure: mechanical and thermal properties. Polym Eng Sci 48:297–306. https://doi.org/10.1002/pen.2090510.1002/pen.20905 ↗
26. Xu C, Jia X, Du J, Zhou F, Liu B, Deng Y, Huai X (2023) Ultra-strong and solvent-free castor oil-based polyurethane thermally conductive structural adhesives for heat management. Ind Crops Prod 194:116181. https://doi.org/10.1016/j.indcrop.2022.11618110.1016/j.indcrop.2022.116181 ↗
27. Liu X, Zhang Z, Luo Y, Sun J, Tian P, Liu H, Mao Z, Kan S, Yu X (2024) Curing characteristics and performance of a bio-based polyurethane engineered sealant with high bonding strength: effect of R value and chain extender content. Constr Build Mater 432:136684. https://doi.org/10.1016/j.conbuildmat10.1016/j.conbuildmat ↗
28. Qin Q, Wei D, Gan J, Gong Y, Jin T (2024) Preparation of environmental-benign castor oil-derived polyurethane thermal conductive structural adhesives with superior strength. Polymer 289:123831. https://doi.org/10.1016/j.polymer.2024.12683110.1016/j.polymer.2024.126831 ↗
29. Jiao W, Zhang J, Zhang Z, Sha A, Jia M (2025) Development of PTMEG/MDI-based solid-solid phase change materials for asphalt pavements deicing. Constr Build Mater 467:140301. https://doi.org/10.1016/j.conbuildmat.2025.14030110.1016/j.conbuildmat.2025.140301 ↗
30. Deng Y, Huang S, Liu Y, Xu J, Li Z, He S, Zhang J (2023) Preparation and relationship between structure and properties of PTMEG based polyurethane acrylate UV cured films. J Macromol Sci A 60:63–70. https://doi.org/10.1080/10601325.2022.214934010.1080/10601325.2022.2149340 ↗
31. Du J, Zhang W, Yang W, Sun B, Xian C, Li Y, Xia T, Yang C (2024) Study of shape memory mechanism and performance of shape memory polyurethane prepared based on tetrahydrofuran. J Mol Struct 1302:137484. https://doi.org/10.1016/j.molstruc.2024.13748410.1016/j.molstruc.2024.137484 ↗
32. Sáenz-Pérez M, Lizundia E, Laza JM, García-Barrasa J, Vilas JL, León LM (2016) Methylene diphenyl diisocyanate (MDI) and toluene diisocyanate (TDI) based polyurethanes: thermal, shape-memory and mechanical behavior. RSC Adv. 6:69094–69102. https://doi.org/10.1039/C6RA13492K10.1039/C6RA13492K ↗
33. Kumagai S, Motokucho S, Yabuki R, Anzai A, Kameda T, Watanabe A, Nakatani H, Yoshioka T (2017) Effects of hard- and soft-segment composition on pyrolysis characteristics of MDI, BD, and PTMG-based polyurethane elastomers. J Anal Appl Pyrol 126:337–345. https://doi.org/10.1016/j.jaap.2017.05.01210.1016/j.jaap.2017.05.012 ↗
34. Lin L, Mao H, Li Z, Li W, Wang C (2021) Preparation and characterization of optically active polyurethane from rotatory binaphthol monomer and polyurethane prepolymer. Molecules 26:2986. https://doi.org/10.3390/molecules2610298610.3390/molecules26102986 ↗
35. Sheikh N, Katbab AA, Mirzadeh H (2000) Isocyanate-terminated urethane prepolymer as bioadhesive base material: synthesis and characterization. Int J Adhes Adhes 20:299–304. https://doi.org/10.1016/S0143-7496(99)00060-310.1016/S0143-7496(99)00060-3 ↗
36. Król P, Pilch-Pitera B (2008) Mechanical properties of crosslinked polyurethane elastomers based on well-defined prepolymers. J Appl Polym Sci 107:1439–1448. https://doi.org/10.1002/app.2648210.1002/app.26482 ↗
37. Reboredo MM, Rojas AJ, Williams RJJ (1983) Kinetic and viscosity relations for thermosetting polyurethanes. Polym J 15:9–14. https://doi.org/10.1295/polymj.15.910.1295/polymj.15.9 ↗
38. Li W, Zhou Y, Zhang H, Tang X (2023) A review on battery thermal management for new energy vehicles. Energies 16:4845. https://doi.org/10.3390/en1613484510.3390/en16134845 ↗
39. Jin X, Guo N, You Z, Tan Y (2020) Design and performance of polyurethane elastomers composed with different soft segments. Materials 13:4991. https://doi.org/10.3390/ma1321499110.3390/ma13214991 ↗
40. Duan C, Yuan D, Yang Z, Li S, Tao L, Wang Q, Wang T (2018) High wear-resistant performance of thermosetting polyimide reinforced by graphitic carbon nitride (g-C3N4) under high temperature. Compos Part A-Appl S 113:200–208. https://doi.org/10.1016/j.compositesa.2018.07.00810.1016/j.compositesa.2018.07.008 ↗
41. Zhang Y, Ying H, Hart KR, Wu Y, Hsu AJ, Coppola AM, Ann Kim T, Yang K, Sottos NR, White SR, Cheng J (2016) Malleable and recyclable poly(urea-urethane) thermosets bearing hindered urea bonds. Adv. Mater. 28:7646–7651. https://doi.org/10.1002/adma.20160124210.1002/adma.201601242 ↗
42. Huang Z, Wang H, Zhang Y, Liu Z, Yin X, Liu X, Lin W, Lin X, Xu Z, Sun Y, Yi G (2024) ‘Rigid-flexible’ strategy for high-strength, near-room-temperature self-healing, photo-thermally functionalised lignin-reinforced polyurethane elastomers. Int J Bio Macromol 280:136127. https://doi.org/10.1016/j.ijbiomac.2024.13612710.1016/j.ijbiomac.2024.136127 ↗
43. Ding H, Xia C, Wang J, Wang C, Chu F (2016) Inherently flame-retardant flexible bio-based polyurethane sealant with phosphorus and nitrogen-containing polyurethane prepolymer. J Mater Sci 51:5008–5018. https://doi.org/10.1007/s10853-016-9805-y10.1007/s10853-016-9805-y ↗
44. Zhang G, Yin T, Nian G, Suo Z (2021) Fatigue-resistant polyurethane elastomer composites. Extreme Mech Lett 48:101434. https://doi.org/10.1016/j.eml.2021.10143410.1016/j.eml.2021.101434 ↗
45. Ristić I, Cakić S, Vukić N, Teofilović V, Tanasić J, Pilić B (2023) The influence of soft segment structure on the properties of polyurethanes. Polymers 15:3755. https://doi.org/10.3390/polym1518375510.3390/polym15183755 ↗
46. Wang Y, Wang L, Liu H, He S, Liu X, Liu W, Huang M, Zhu C (2021) Polyurethane as smart biocoatings: effects of hard segments on phase structures and properties. Prog Org Coat 150:106000. https://doi.org/10.1016/j.porgcoat.2020.10600010.1016/j.porgcoat.2020.106000 ↗
47. Aoki D, Yoshida H, Ajiro H (2024) Comb polyurethanes consisting of hard segment backbones and dangling soft segments for tailoring mechanical properties of thermoplastics. Macromolecules 57:640–651. https://doi.org/10.1021/acs.macromol.3c0228510.1021/acs.macromol.3c02285 ↗
48. Wei H, Wang X, Liu W, Dong S, Dai T, Luo F, Li Z, Tan H, Li J (2024) Investigating the structure and properties of polyurethane hydrogels with varying soft and hard segments. J Polym Sci 62:3979–3991. https://doi.org/10.1002/pol.2024005210.1002/pol.20240052 ↗
49. Huang M, Li Z, Xu W, He S, Liu W, Jiang L, Liu H (2024) Visualization and quantification of microphase separation in thermoplastic polyurethanes under different hard segment contents and its effect on the mechanical properties. Polym Test 131:108329. https://doi.org/10.1016/j.polymertesting.2024.10832910.1016/j.polymertesting.2024.108329 ↗
50. Lempesis N, Rutledge GC (2016) Simulation of the structure and mechanics of crystalline 4,4′-diphenylmethane diisocyanate (MDI) with n-butanediol (BDO) as chain extender. Polymer 107:233–239. https://doi.org/10.1016/j.polymer.2016.11.02110.1016/j.polymer.2016.11.021 ↗
51. Abedi R, Memar Maher B, Amirkhani L, Rezaei M, Jamshidi S (2024) The effect of polycaprolactone polyol molecular weight and chain extender type on the physico-mechanical properties and gas permeability of polyurethane thermoplastic elastomer membranes. Polym-Plast Tech Mat 63:1582–1595. https://doi.org/10.1080/25740881.2024.234693710.1080/25740881.2024.2346937 ↗
52. Wang H, Cao L, Wang X, Lang X, Cong W, Han L, Zhang H, Zhou H, Sun J, Zong C (2024) Effects of isocyanate structure on the properties of polyurethane: synthesis performance, and self-healing characteristics. Polymers 16:3045. https://doi.org/10.3390/polym1621304510.3390/polym16213045 ↗
53. Łopianiak I, Butruk-Raszeja B, Wojasiński M (2020) Shore hardness of bulk polyurethane affects the properties of nanofibrous materials differently. J Mech Behav Biomed 144:103366. https://doi.org/10.1016/j.mechmat.2020.10336610.1016/j.mechmat.2020.103366 ↗
54. Shrestha ML, Noble I, Ionescu M, Dai J, Hong J, Petrović ZS (2025) Structure elucidation of castor oil based self-condensed polyols and applications in flexible foams and elastomers. J Polym Environ 161:106793. https://doi.org/10.1016/j.jmbbm.2024.10679310.1016/j.jmbbm.2024.106793 ↗
55. Jaisingh A, Halloran MW, Rajput BS, Burkart MD (2024) Tailoring high hardness and rigidity in biodegradable thermoplastic polyurethanes. ACS Appl Polym Mater 6:9724–9734. https://doi.org/10.1021/acsapm.4c0157910.1021/acsapm.4c01579 ↗
56. Tang X, Guo X, Gong L, Meng X, Xiu Z, Xin H, Liu L, Zhang B (2023) Microstructure construction design and damping properties of polyurethane microporous elastomer modified by suspension chain extender via end-controlling oriented synthesis. Polymer 270:125748. https://doi.org/10.1016/j.polymer.2023.12574810.1016/j.polymer.2023.125748 ↗
57. Muñoz-Chilito J, Lara-Ramos JA, Marín L, Machuca-Martínez F, Correa-Aguirre JP, Hidalgo-Salazar MA, García-Navarro S, Roca-Blay L, Rodríguez LA, Mosquera-Vargas E, Diosa JE (2023) Morphological electrical and hardness characterization of carbon nanotube-reinforced thermoplastic polyurethane (TPU) nanocomposite plates. Molecules 28:3598. https://doi.org/10.3390/molecules2808359810.3390/molecules28083598 ↗
58. Noureddine B, Zitouni S, Achraf B, Houssém C, Jannick D, Jean-François G (2022) Development and characterization of tailored polyurethane foams for shock absorption. Appl Sci 12:2206. https://doi.org/10.3390/app1204220610.3390/app12042206 ↗
59. Wang H, Liu H, Yao J, Ye D, Lang Z, Glowacz A (2021) Mapping the knowledge domains of new energy vehicle safety: informetrics analysis-based studies. J Energy Storage 35:102275. https://doi.org/10.1016/j.est.2021.10227510.1016/j.est.2021.102275 ↗
60. Prochowski L, Ziubiński M, Dziewiecki K, Szwajkowski P (2022) Impact energy and the risk of injury to motorcar occupants in the front-to-side vehicle collision. Nonlinear Dyn 110:3333–3354. https://doi.org/10.1007/s11071-022-07779-810.1007/s11071-022-07779-8 ↗
61. Fan W, Shen D, Zhang Z, Huang X, Shao X (2020) A novel UHPFRC-based protective structure for bridge columns against vehicle collisions: experiment, simulation, and optimization. Eng Struct 207:110247. https://doi.org/10.1016/j.engstruct.2020.11024710.1016/j.engstruct.2020.110247 ↗
62. Erkek B, Kosedag E, Adin H (2024) The impact of graphene filler on the energy absorption of hybrid composite crash boxes. Int J Mech Mater Des. https://doi.org/10.1007/s10999-024-09739-z10.1007/s10999-024-09739-z ↗
63. Hu F, Gao J, Zhang B, Qi F, Zhao N, Ouyang X (2021) Effects of modified Al2O3-decorated ionic liquid on the mechanical properties and impact resistance of a polyurethane elastomer. Materials 14:4712. https://doi.org/10.3390/ma1416471210.3390/ma14164712 ↗
64. Liu H, Xiao Y, Zou Y, Han Y, Fan C, Sun Y (2024) Dynamic mechanical properties and constitutive modeling of polyurethane microporous elastomers. Polymers 16:3056. https://doi.org/10.3390/polym1621305610.3390/polym16213056 ↗
65. Bates SRG, Farrow IR, Trask RS (2016) 3D printed polyurethane honeycombs for repeated tailored energy absorption. Mater Des 112:172–183. https://doi.org/10.1016/j.matdes.2016.08.06210.1016/j.matdes.2016.08.062 ↗
66. Wang G, Ren T, Zhang W, Liu J, Xu Z, Zhao J, Li X, Li S, Zhao G (2022) Research on the cyclic compression performance of polycarbonate-based thermoplastic polyurethane foams prepared by microcellular foaming. J CO2 Util 65:102218. https://doi.org/10.1016/j.jcou.2022.10221810.1016/j.jcou.2022.102218 ↗
67. Jiang H, Liu S, Liu C, Shang J, Wang X, Li X, Su X, Zou M (2025) Impact of chain extenders on pore structure, properties, and reaction kinetics of microporous polyurethane elastomers. ACS Appl Polym Mater 7:63–72. https://doi.org/10.1021/acsapm.4c0262010.1021/acsapm.4c02620 ↗
68. Pongmuksuwan P, Harnnarongchai W (2022) Synthesis and characterization of soft polyurethane for pressure ulcer prevention. Polym Test 117:107634. https://doi.org/10.1016/j.polymertesting.2022.10763410.1016/j.polymertesting.2022.107634 ↗
69. Diercks N, Johlitz M, Calipel J (2016) The dynamic Mullins effect: On the influence of the Mullins effect on dynamic moduli. P I Mech Eng L-J Mat 230:705–716. https://doi.org/10.1177/146442071456471210.1177/1464420714564712 ↗
70. Xu W, Zhang M, Liu Y, Zhang H, Chen M, Jiang H, Wang Y (2020) Stress-softening in particle-filled polyurethanes under cyclic compressive loading. Polymers 12:1588. https://doi.org/10.3390/polym1207158810.3390/polym12071588 ↗
71. Shen Y, Golnaraghi F, Plumtree A (2001) Modelling compressive cyclic stress-strain behaviour of structural foam. Int J Fatigue 23:491–497. https://doi.org/10.1016/S0142-1123(01)00014-710.1016/S0142-1123(01)00014-7 ↗
72. Zhang C, Gou X, Xiao R (2021) Hysteresis in glass microsphere filled elastomers under cyclic loading. Polym Test 95:107081. https://doi.org/10.1016/j.polymertesting.2021.10708110.1016/j.polymertesting.2021.107081 ↗
73. Kumar A, Shahin MB, Jahangir Hossain S, Chattopadhyay S, Gonzalez M (2023) Mechanical characterization of filled elastomer nanocomposites under finite-deformation cyclic loading using yield-surface-free plasticity. Compos Sci Technol. 241:110140. https://doi.org/10.1016/j.compscitech.2023.11014010.1016/j.compscitech.2023.110140 ↗
74. Marco Y, Huneau B, Masquelier I, Le Saux V, Charrier P (2017) Prediction of fatigue properties of natural rubber based on the descriptions of the cracks population and of the dissipated energy. Polym Test 59:67–74. https://doi.org/10.1016/j.polymertesting.2017.01.01510.1016/j.polymertesting.2017.01.015 ↗
75. Śliwa-Wieczorek K, Zając B (2021) Rigid and flexible double shear lap adhesive joint at elevated temperature-an experimental study. Polymers 13:2873. https://doi.org/10.3390/polym1317287310.3390/polym13172873 ↗
76. Akpinar S, Hacısalihoglu İ, Çalık A (2023) The effect of geometry on joint strength in adhesively bonded joints with the same adhesive area. Mech Adv Mater Struct 31:2635–2647. https://doi.org/10.1080/15376494.2022.216264110.1080/15376494.2022.2162641 ↗
77. Whittaker RE (1971) The mechanical behavior of microporous polyurethane foams. J Appl Polym Sci 15:1205–1218. https://doi.org/10.1002/app.1971.07015051510.1002/app.1971.070150515 ↗
78. Adin H, Adin MŞ (2022) Effect of particles on tensile and bending properties of jute epoxy composites. Mater Test 64:401–411. https://doi.org/10.1515/mt-2021-203810.1515/mt-2021-2038 ↗
79. Rachid HB, Noureddine D, Benali B, Adin MŞ (2024) Effect of nanocomposites rate on the crack propagation in the adhesive of single lap joint subjected to tension. Mech Adv Mater Struct 31:6898–6906. https://doi.org/10.1080/15376494.2023.224031910.1080/15376494.2023.2240319 ↗
80. Fourche G (1995) An overview of the basic aspects of polymer adhesion. Part I: Fundamentals. Polym Eng Sci 35:957–967. https://doi.org/10.1002/pen.76035120210.1002/pen.760351202 ↗
81. Meng X, Huang Y, Xie Y, Li J, Guan M, Wan L, Dong Z, Cao J (2019) Friction self-riveting welding between polymer matrix composites and metals. Compos Part A-Appl S 127:105624. https://doi.org/10.1016/j.compositesa.2019.10562410.1016/j.compositesa.2019.105624 ↗
82. Lucchetta G, Marinello F, Bariani PF (2011) Aluminum sheet surface roughness correlation with adhesion in polymer metal hybrid overmolding. CIRP Ann Manuf Techn 60:559–562. https://doi.org/10.1016/j.cirp.2011.03.07310.1016/j.cirp.2011.03.073 ↗
83. Izadi O, Mosaddegh P, Silani M, Dinari M (2017) An experimental study on mechanical properties of a novel hybrid metal-polymer joining technology based on a reaction between isocyanate and hydroxyl groups. J Manuf Processes 30:217–225. https://doi.org/10.1016/j.jmapro.2017.09.02210.1016/j.jmapro.2017.09.022 ↗
84. Zou X, Chen K, Yao H, Chen C, Lu X, Ding P, Wang M, Hua X, Shan A (2022) Chemical reaction and bonding mechanism at the polymer-metal interface. ACS Appl Mater Interfaces 14:27383–27396. https://doi.org/10.1021/acsami.2c0497110.1021/acsami.2c04971 ↗
85. Wang Y, Wang H, Chen Y, Zhou W, Hua L (2024) Adhesion improvement and strengthening mechanisms of ultrasonic adhesive-impact bonding process for CFRP/Ni bonded joints. Surf Interfaces 46:104108. https://doi.org/10.1016/j.surfin.2024.10410810.1016/j.surfin.2024.104108 ↗
86. Tan C, Su J, Liu Y, Feng Z, Song X, Wang X, Chen B, Xia H (2022) Enhanced interfacial bonding strength of laser bonded titanium alloy/CFRTP joint via hydrogen bonds interaction. Compos Part B-Eng 239:109966. https://doi.org/10.1016/j.compositesb.2022.10996610.1016/j.compositesb.2022.109966 ↗
87. Tardio S, Abel M, Carr RH, Watts JF (2019) The interfacial interaction between isocyanate and stainless steel. Int J Adhes Adhes 88:1–10. https://doi.org/10.1016/j.ijadhadh.2018.10.00810.1016/j.ijadhadh.2018.10.008 ↗
88. Liu J, Zhang Q, Zhang B, Yu M (2020) The bonding mechanism of the micro-interface of polymer coated steel. Polymers 12:3052. https://doi.org/10.3390/polym1212305210.3390/polym12123052 ↗