DataVXJournal of Materials SciencePaper
journal article·2025-05

Processing—microstructure—functional properties correlation for NiTi-based pseudoelastic shape memory alloy

Adya Charan Arohi, Priyadarshini Nayak, Kranti Kumar Punyamanthula, Surla Ramesh, Soumitra Tarafder, Jan Frenzel, Indrani Sen

Journal of Materials Science· Volume 60· Issue 20
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Metals & alloys

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Thompson SA (2000) An overview of nickel-titanium alloys used in dentistry. Int Endod J 33:297–310. https://doi.org/10.1046/j.1365-2591.2000.00339.x10.1046/j.1365-2591.2000.00339.x ↗
2. Ammar O, Haddar N, Dieng L (2017) Experimental investigation of the pseudoelastic behaviour of NiTi wires under strain- and stress-controlled cyclic tensile loadings. Intermetallics 81:52–61. https://doi.org/10.1016/j.intermet.2017.03.00210.1016/j.intermet.2017.03.002 ↗
3. Lagoudas DC (2008) Shape memory alloys: modeling and engineering applications. Springer
4. Otsuka K, Ren X (2005) Physical metallurgy of Ti-Ni-based shape memory alloys. Prog Mater Sci 50:511–678. https://doi.org/10.1016/j.pmatsci.2004.10.00110.1016/j.pmatsci.2004.10.001 ↗
5. Kumar SS, Arohi AC, Sen I (2022) A review on micro-mechanical testing of NiTi-based shape memory alloys. J Indian Inst Sci 102:211–23510.1007/s41745-021-00278-6 ↗
6. Arohi AC, Shekhar S, Sen I (2023) Effect of thermomechanical processing on microstructure evolution and mechanical properties of metastable β Ti-5Al-5V-5Mo-3Cr alloy. Mater Chem Phys 314:1–18
7. Nath P, Marandi L, Sen I (2022) Processing-microstructure-property correlation in thermo-mechanically processed Ti-6Al-4V alloys: a comparative study between conventional and novel approaches. J Alloy Compd 927:16703910.1016/j.jallcom.2022.167039 ↗
8. Wu X, Yuan F, Yang M et al (2015) Nanodomained nickel unite nanocrystal strength with coarse-grain ductility. Sci Rep 5:1–10. https://doi.org/10.1038/srep1172810.1038/srep11728 ↗
9. Arohi AC, Shekhar S, Sen I (2024) Stress-induced martensitic transformation during cold rolling of metastable β Ti-5Al-5V-5Mo-3Cr alloy. Mater Sci Eng: A 911:14691010.1016/j.msea.2024.146910 ↗
10. Frenzel J, Wieczorek A, Opahle I et al (2015) On the effect of alloy composition on martensite start temperatures and latent heats in Ni-Ti-based shape memory alloys. Acta Mater 90:213–231. https://doi.org/10.1016/j.actamat.2015.02.02910.1016/j.actamat.2015.02.029 ↗
11. Wang W, Zhao W, Mu W et al (2024) Effect of hot-rolling process on the microstructure, mechanical and corrosion behaviors of dual-phase Co-based entropic alloys. Mater Sci Eng, A 918:14743310.1016/j.msea.2024.147433 ↗
12. Hu Z, Zheng J, Hua L, Sun Q (2024) Investigation of forging formability, microstructures and mechanical properties of pre-hardening Al-Zn-Mg-Cu alloy. J Manuf Process 131:2082–210010.1016/j.jmapro.2024.10.004 ↗
13. Guo Q, Hou H, Pan Y et al (2023) Hardening-softening of Al0. 3CoCrFeNi high-entropy alloy under nanoindentation. Mater Des 231:11205010.1016/j.matdes.2023.112050 ↗
14. Wang Z, Ning Y, Di P et al (2024) Understanding the fracture mechanisms of Ni–Co–Cr-type superalloys: role of precipitate evolution and strength degradation. Mater Sci Eng, A 902:14662310.1016/j.msea.2024.146623 ↗
15. Guo Q, Hou H, Wang K et al (2023) Coalescence of Al0. 3CoCrFeNi polycrystalline high-entropy alloy in hot-pressed sintering: a molecular dynamics and phase-field study. Npj Comput Mater 9:18510.1038/s41524-023-01139-9 ↗
16. Yang ML, Xu JL, Huang J et al (2024) Wear resistance of N-doped CoCrFeNiMn high entropy alloy coating on the Ti-6Al-4V alloy. J Thermal Spray Technol 33:240810.1007/s11666-024-01864-7 ↗
17. Bradley TG, Brantley WA, Culbertson BM (1996) Differential scanning calorimetry (DSC) analyses of superelastic and nonsuperelastic nickel-titanium orthodontic wires. Am J Orthod Dentofac Orthop 109:589–597. https://doi.org/10.1016/S0889-5406(96)70070-710.1016/S0889-5406(96)70070-7 ↗
18. Alapati SB, Brantley WA, Iijima M et al (2009) Micro-XRD and temperature-modulated DSC investigation of nickel-titanium rotary endodontic instruments. Dent Mater 25:1221–1229. https://doi.org/10.1016/j.dental.2009.04.01010.1016/j.dental.2009.04.010 ↗
19. Kumar SS, Marandi L, Balla VK et al (2019) Microstructure – property correlations for additively manufactured NiTi based shape memory alloys. Materialia 8:100456. https://doi.org/10.1016/j.mtla.2019.10045610.1016/j.mtla.2019.100456 ↗
20. Mitwally ME, Farag M (2009) Effect of cold work and annealing on the structure and characteristics of NiTi alloy. Mater Sci Eng, A 519:155–16610.1016/j.msea.2009.04.057 ↗
21. Paula AS, Canejo JPHG, Martins RMS, Braz Fernandes FM (2004) Effect of thermal cycling on the transformation temperature ranges of a Ni-Ti shape memory alloy. Mater Sci Eng, A 378:92–96. https://doi.org/10.1016/j.msea.2003.11.05710.1016/j.msea.2003.11.057 ↗
22. Lin HC, Wu SK (1993) Determination of heat of transformation in cold rolled martensitic TiNi alloy. Metall Mater Trans A 24A:293–29910.1007/BF02657316 ↗
23. Drexel J, Guna S (2006) The effects of cold work and heat treatment on the properties of nitinol wire. In: Proceedings of the International Conference on Shape Memory and Superelastic Technologies 44–454
24. Nishida M, Wayman CM, Honma T (1986) Precipitation processes in near-equiatomic TiNi shape memory alloys. Metall Trans A 17:1505–151510.1007/BF02650086 ↗
25. Pelton AR, DiCello J, Miyazaki S (2000) Optimisation of processing and properties of medical grade Nitinol wire. Minim Invasive Ther Allied Technol 9:107–118. https://doi.org/10.3109/1364570000906305710.3109/13645700009063057 ↗
26. Losertová M, Štencek M, Matýsek D, et al (2017) Microstructure evolution of heat treated NiTi alloys. In: IOP Conference Series: Materials Science and Engineering 26610.1088/1757-899X/266/1/012008 ↗
27. Srivastava AK, Yang Z, Schryvers D, Van HJ (2008) Effect of annealing on cold-rolled Ni–Ti alloys. Mater Sci Eng, A 481:594–59710.1016/j.msea.2006.12.216 ↗
28. Michutta J, Somsen C, Yawny A et al (2006) Elementary martensitic transformation processes in Ni-rich NiTi single crystals with Ni4Ti3 precipitates. Acta Mater 54:3525–3542. https://doi.org/10.1016/j.actamat.2006.03.03610.1016/j.actamat.2006.03.036 ↗
29. Wagner MFX, Dey SR, Gugel H et al (2010) Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling. Intermetallics 18:1172–1179. https://doi.org/10.1016/j.intermet.2010.02.04810.1016/j.intermet.2010.02.048 ↗
30. Torra V, Martorell F, Lovey FC, Sade ML (2017) Civil engineering applications: specific properties of NiTi thick wires and their damping capabilities, a review. Shape Memory Superelasticity 3:403–413. https://doi.org/10.1007/s40830-017-0135-y10.1007/s40830-017-0135-y ↗
31. Ang YX, Khudzari AZM, Ali MSM (2021) Non-invasive treatment for coronary in-stent restenosis via wireless revascularization with nitinol active stent. IEEE Trans Biomed Eng 68:3681–368910.1109/TBME.2021.3082172 ↗
32. Nematollahi M, Baghbaderani KS, Amerinatanzi A et al (2019) Application of NiTi in assistive and rehabilitation devices: a review. Bioengineering 6:3710.3390/bioengineering6020037 ↗
33. Eggeler G, Hornbogen E, Yawny A et al (2004) Structural and functional fatigue of NiTi shape memory alloys. Mater Sci Eng, A 378:24–33. https://doi.org/10.1016/j.msea.2003.10.32710.1016/j.msea.2003.10.327 ↗
34. Delville R, Malard B, Pilch J et al (2011) Transmission electron microscopy investigation of dislocation slip during superelastic cycling of Ni–Ti wires. Int J Plast 27:282–29710.1016/j.ijplas.2010.05.005 ↗
35. Schäfer A, Grossman C, Eggeler G, Wagner M (2007) Localisation phenomena in NiTi shape memory alloys-experimental analysis of Lliders-like shear bands in one-and two-dimensional loading scenarios. Proc E-MRS Warsem FallMeeting 124
36. Vojtěch D, Michalcová A, Čapek J et al (2014) Structural and mechanical stability of the nano-crystalline Ni–Ti (50.9 at.% Ni) shape memory alloy during short-term heat treatments. Intermetallics 49:7–1310.1016/j.intermet.2013.12.013 ↗
37. Razali MF, Mahmud AS (2015) Gradient deformation behavior of NiTi alloy by ageing treatment. J Alloy Compd 618:182–18610.1016/j.jallcom.2014.08.070 ↗
38. Frick CP, Ortega AM, Tyber J et al (2005) Thermal processing of polycrystalline NiTi shape memory alloys. Mater Sci Eng, A 405:34–4910.1016/j.msea.2005.05.102 ↗
39. Kazemi-Choobi K, Khalil-Allafi J, Elhami A, Asadi P (2013) Influence of aging treatment on in-situ electrical resistance variation during aging of nickel-rich NiTi shape memory wires. Metall Mater Trans A 44:4429–443310.1007/s11661-013-1806-8 ↗
40. Sk S, Kumar IA, Marandi L, Sen I (2020) Assessment of small-scale deformation characteristics and stress-strain behavior of NiTi based shape memory alloy using nanoindentation. Acta Mater 201:303–31510.1016/j.actamat.2020.09.080 ↗
41. Yeung KWK, Cheung KMC, Lu WW, Chung CY (2004) Optimization of thermal treatment parameters to alter austenitic phase transition temperature of NiTi alloy for medical implant. Mater Sci Eng, A 383:213–21810.1016/j.msea.2004.05.063 ↗
42. Marandi L, Sen I (2021) In-vitro mechanical behaviour and high cycle fatigue characteristics of NiTi-based shape memory alloy wire. Int J Fatigue 148:10622610.1016/j.ijfatigue.2021.106226 ↗
43. ASTM E3-95 (2016) Standard Practice for Preparation of Metallic Specimens. ASTM International 82: 1–15
44. ASTM F (2005) Standard terminology for nickel-titanium shape memory alloys. In: Am. Soc. Test. Mater
45. Oliver WC, Pharr GM (2004) Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res. https://doi.org/10.1557/jmr.2004.19.1.310.1557/jmr.2004.19.1.3 ↗
46. ASTM-E8/E8–11 (2013) Standard test methods for tension testing of metallic materials. ASTM International ASTM Stds.:1–28. https://doi.org/10.1520/E000810.1520/E0008 ↗
47. Jiang SY, Zhao YN, Zhang YQ et al (2013) Effect of solution treatment and aging on microstructural evolution and mechanical behavior of NiTi shape memory alloy. Trans Nonferrous Metals Soc China 23:3658–3667. https://doi.org/10.1016/S1003-6326(13)62914-310.1016/S1003-6326(13)62914-3 ↗
48. Wu S, Liu X, Wu G et al (2013) Wear mechanism and tribological characteristics of porous NiTi shape memory alloy for bone scaffold. J Biomed Mater Res, Part A 101:2586–260110.1002/jbm.a.34568 ↗
49. Chmielewska A, Wysocki B, Kwaśniak P et al (2022) Heat treatment of NiTi alloys fabricated using laser powder bed fusion (LPBF) from elementally blended powders. Materials 15:330410.3390/ma15093304 ↗
50. Safaei K, Abedi H, Nematollahi M, et al (2021) Additive manufacturing of NiTi shape memory alloy for biomedical applications: review of the LPBF process ecosystem. Jom 1–1610.1007/s11837-021-04937-y ↗
51. Jiang S, Zhao Y, Zhang Y et al (2013) Effect of solution treatment and aging on microstructural evolution and mechanical behavior of NiTi shape memory alloy. Trans Nonferrous Metals Soc China 23:3658–366710.1016/S1003-6326(13)62914-3 ↗
52. Kaya M, Orhan N, Kurt B (2009) Effect of solution treatment under load on microstructure and fabrication of porous NiTi shape memory alloy by self-propagating high temperature synthesis. Powder Metallurgy 52(1):36–41. https://doi.org/10.1179/174329008X31555710.1179/174329008X315557 ↗
53. El-Bagoury N, Hessien MM, Zaki ZI (2014) Influence of aging on microstructure, martensitic transformation and mechanical properties of NiTiRe shape memory alloy. Met Mater Int 20:997–1002. https://doi.org/10.1007/s12540-014-5003-010.1007/s12540-014-5003-0 ↗
54. Naveen Kumar Reddy B (2020) Aging time correlation for near-equiatomic NiTi thin films deposited through direct current magnetron sputtering. Results Phys 17:103075. https://doi.org/10.1016/j.rinp.2020.10307510.1016/j.rinp.2020.103075 ↗
55. Wagner M-X, Dey SR, Gugel H et al (2010) Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling. Intermetallics 18:1172–117910.1016/j.intermet.2010.02.048 ↗
56. Matsumoto H (1991) Effects of thermal cycling and annealing on the martensitic transformation of cold-rolled Ni48Ti52 alloy. Mater Lett 11:40–42. https://doi.org/10.1016/0167-577X(91)90186-A10.1016/0167-577X(91)90186-A ↗
57. Pattabi M, Murari MS (2015) Effect of cold rolling on phase transformation temperatures of NiTi shape memory alloy. J Mater Eng Perform 24:556–56410.1007/s11665-014-1344-6 ↗
58. Pattabi M, Murari MS (2014) Effect of cold rolling on phase transformation temperatures of NiTi shape memory alloy. J Mater Eng Perform 24:556–564. https://doi.org/10.1007/s11665-014-1344-610.1007/s11665-014-1344-6 ↗
59. Khalil-Allafi J, Eggeler G, Schmahl WW, Sheptyakov D (2006) Quantitative phase analysis in microstructures which display multiple step martensitic transformations in Ni-rich NiTi shape memory alloys. Mater Sci Eng, A 438–440:593–596. https://doi.org/10.1016/j.msea.2006.02.14310.1016/j.msea.2006.02.143 ↗
60. Wang XB, Verlinden B, Van Humbeeck J (2014) R-phase transformation in NiTi alloys. Mater Sci Technol 30:1517–1529. https://doi.org/10.1179/1743284714Y.000000059010.1179/1743284714Y.0000000590 ↗
61. Carroll MC, Somsen C, Eggeler G (2004) Multiple-step martensitic transformations in Ni-rich NiTi shape memory alloys. Scripta Mater 50:187–192. https://doi.org/10.1016/j.scriptamat.2003.09.02010.1016/j.scriptamat.2003.09.020 ↗
62. Sadiq H, Wong MB, Al-Mahaidi R, Zhao XL (2010) The effects of heat treatment on the recovery stresses of shape memory alloys. Smart Mater Struct. https://doi.org/10.1088/0964-1726/19/3/03502110.1088/0964-1726/19/3/035021 ↗
63. Kaya I, Karaca HE, Nagasako M, Kainuma R (2020) Effects of aging temperature and aging time on the mechanism of martensitic transformation in nickel-rich NiTi shape memory alloys. Mater Charact 159:11003410.1016/j.matchar.2019.110034 ↗
64. Prokoshkin S, Dubinskiy S, Brailovski V (2019) Features of a nanosubgrained structure in deformed and annealed Ti–Ni SMA: a brief review. Shape Memory Superelasticity 5:336–34510.1007/s40830-019-00241-6 ↗
65. Sen I, Roy S, Wagner MF (2017) Indentation response and structure-property correlation in a bimodal Ti – 6Al – 4V alloy. Adv Eng Mater 19(12):1700298. https://doi.org/10.1002/adem.20170029810.1002/adem.201700298 ↗
66. Avula I, Arohi AC, Kumar CS, Sen I (2021) Microstructure, corrosion and mechanical behavior of 15–5 PH stainless steel processed by direct metal laser sintering. J Mater Eng Perform 30:6924–6937. https://doi.org/10.1007/s11665-021-06069-510.1007/s11665-021-06069-5 ↗
67. Pfetzing-Micklich J, Somsen C, Dlouhy A et al (2013) On the crystallographic anisotropy of nanoindentation in pseudoelastic NiTi. Acta Mater 61:602–616. https://doi.org/10.1016/j.actamat.2012.09.08110.1016/j.actamat.2012.09.081 ↗
68. Zhang D, Li Y, Cong W (2021) Multi-scale pseudoelasticity of NiTi alloys fabricated by laser additive manufacturing. Mater Sci Eng, A 821:141600. https://doi.org/10.1016/j.msea.2021.14160010.1016/j.msea.2021.141600 ↗
69. Sittner P, Heller L, Pilch J et al (2014) Young’s modulus of austenite and martensite phases in superelastic NiTi wires. J Mater Eng Perform 23:2303–2314. https://doi.org/10.1007/s11665-014-0976-x10.1007/s11665-014-0976-x ↗
70. Kan Q, Yan W, Kang G, Sun Q (2013) Oliver-Pharr indentation method in determining elastic moduli of shape memory alloys - a phase transformable material. J Mech Phys Solids 61:2015–2033. https://doi.org/10.1016/j.jmps.2013.05.00710.1016/j.jmps.2013.05.007 ↗
71. Sk S, Kumar IA, Marandi L, Sen I (2020) Assessment of small-scale deformation characteristics and stress-strain behavior of NiTi based shape memory alloy using nanoindentation. Acta Mater 201:303–315. https://doi.org/10.1016/j.actamat.2020.09.08010.1016/j.actamat.2020.09.080 ↗
72. Sujith Kumar S, Sen I (2021) A comparative study on deformation behaviour of superelastic NiTi with traditional elastic-plastic alloys in sub-micron scale. Trans Indian Inst Met. https://doi.org/10.1007/s12666-021-02207-810.1007/s12666-021-02207-8 ↗
73. Lin HC, Wu S-K (1994) The tensile behavior of a cold-rolled and reverse-transformed equiatomic TiNi alloy. Acta Metall Mater 42:1623–163010.1016/0956-7151(94)90371-9 ↗
74. Liang Q, Zhao S, Liang C et al (2022) Strain states and unique properties in cold-rolled TiNi shape memory alloys. Acta Mater 231:117890. https://doi.org/10.1016/j.actamat.2022.11789010.1016/j.actamat.2022.117890 ↗
75. Liu Y, Xie ZL, Van Humbeeck J, Delaey L (1999) Effect of texture orientation on the martensite deformation of NiTi shape memory alloy sheet. Acta Mater 47:645–660. https://doi.org/10.1016/S1359-6454(98)00376-010.1016/S1359-6454(98)00376-0 ↗
76. Maletta C, Furgiuele F (2011) Fracture control parameters for NiTi based shape memory alloys. Int J Solids Struct 48:1658–1664. https://doi.org/10.1016/j.ijsolstr.2011.02.01410.1016/j.ijsolstr.2011.02.014 ↗
77. Laplanche G, Pfetzing-Micklich J, Eggeler G (2014) Orientation dependence of stress-induced martensite formation during nanoindentation in NiTi shape memory alloys. Acta Mater 68:19–31. https://doi.org/10.1016/j.actamat.2014.01.00610.1016/j.actamat.2014.01.006 ↗
78. Wang Z, Luo J, Kuang W et al (2022) Strain rate effect on the thermomechanical behavior of NiTi shape memory alloys: a literature review. Metals 13:5810.3390/met13010058 ↗
79. Shayesteh Moghaddam N, Saedi S, Amerinatanzi A et al (2019) Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment. Sci Rep 9:4110.1038/s41598-018-36641-4 ↗