Review: 4D printing of PLA and its blends/composites: technologies, mechanisms, characterization, and applications
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Materials and Mechanics · Additive Manufacturing and 3D Printing Technologies · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Gibson I, Rosen D, Stucker B (2014) Additive manufacturing technologies: rapid prototyping to direct digital manufacturing, 498 Springer. New York 2:10.1007/978-1-4939-2113-3 ↗
2. Gardan J (2016) Additive manufacturing technologies: state of the art and trends. Int J Prod Res 54:3118–313210.1080/00207543.2015.1115909 ↗
3. Wong KV, Hernandez A (2012) A review of additive manufacturing. ISRN Mech Eng 2012:20876010.5402/2012/208760 ↗
4. Hague R, Dickens P, Hopkinson N (2006) Rapid manufacturing: an industrial revolution for the digital age. John Wiley & Sons
5. MacDonald E, Wicker R (2016) Multiprocess 3D printing for increasing component functionality. Science 353:aaf209310.1126/science.aaf2093 ↗
6. Oropallo W, Piegl LA (2016) Ten challenges in 3D printing. Eng Comput 32:135–14810.1007/s00366-015-0407-0 ↗
7. Attaran M (2017) The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing. Bus Horiz 60:677–68810.1016/j.bushor.2017.05.011 ↗
8. Vaz VM, Kumar L (2021) 3D printing as a promising tool in personalized medicine. AAPS PharmSciTech 22:1–2010.1208/s12249-020-01905-8 ↗
9. Asadollahi M, Gerashi E, Zohrevand M et al (2022) Improving mechanical properties and biocompatibility of 3D printed PLA by the addition of PEG and titanium particles, using a novel incorporation method. Bioprinting 27:e0022810.1016/j.bprint.2022.e00228 ↗
10. Campbell I, Bourell D, Gibson I (2012) Additive manufacturing: rapid prototyping comes of age. Rapid Prototyp J 18:255–25810.1108/13552541211231563 ↗
11. Huang Y, Leu MC, Mazumder J, Donmez A (2015) Additive manufacturing: current state, future potential, gaps and needs, and recommendations. J Manuf Sci Eng 137:01400110.1115/1.4028725 ↗
12. Griffin J (2019) The State of Creativity: The future of 3D printing, 4D Printing and Augmented Reality. Edward Elgar Publishing10.4337/9781786438270 ↗
13. Chu H, Yang W, Sun L et al (2020) 4D printing: a review on recent progresses. Micromachines (Basel) 11:79610.3390/mi11090796 ↗
14. Pingale P, Dawre S, Dhapte-Pawar V et al (2023) Advances in 4D printing: from stimulation to simulation. Drug Deliv Transl Res 13:164–18810.1007/s13346-022-01200-y ↗
15. Tibbits S (2014) 4D printing: multi-material shape change. Archit Des 84:116–121
16. Sydney Gladman A, Matsumoto EA, Nuzzo RG et al (2016) Biomimetic 4D printing. Nat Mater 15:413–41810.1038/nmat4544 ↗
17. Zhao W, Yue C, Liu L et al (2023) Research progress of shape memory polymer and 4D printing in biomedical application. Adv Healthc Mater 12:220197510.1002/adhm.202201975 ↗
18. Ji Z, Jiang P, Guo R, et al (2022) 4D-printed light-responsive structures. In: Smart Materials in Additive Manufacturing. Elsevier, pp 55–10510.1016/B978-0-12-824082-3.00017-9 ↗
19. Yi H, Kim Y (2021) Prototyping of 4D-printed self-shaping building skin in architecture: design, fabrication, and investigation of a two-way shape memory composite (TWSMC) façade panel. J Build Eng 43:10307610.1016/j.jobe.2021.103076 ↗
20. Ntouanoglou K, Stavropoulos P, Mourtzis D (2018) 4D printing prospects for the aerospace industry: a critical review. Procedia Manuf 18:120–12910.1016/j.promfg.2018.11.016 ↗
21. Liu J (2020) Development of bioinspired composites with hierarchical structures
22. Bakhshi R, Mohammadi-Zerankeshi M, Mehrabi-Dehdezi M et al (2023) Additive manufacturing of PLA-Mg composite scaffolds for hard tissue engineering applications. J Mech Behav Biomed Mater 138:10565510.1016/j.jmbbm.2023.105655 ↗
23. Sun Y-C, Wan Y, Nam R et al (2019) 4D-printed hybrids with localized shape memory behaviour: implementation in a functionally graded structure. Sci Rep 9:1875410.1038/s41598-019-55298-1 ↗
24. Jayasekara T, Wickrama Surendra Y, Rathnayake M (2022) Polylactic acid pellets production from corn and sugarcane molasses: process simulation for scaled-up processing and comparative life cycle analysis. J Polym Environ 30:4590–460410.1007/s10924-022-02535-w ↗
25. Dong K, Panahi-Sarmad M, Cui Z et al (2021) Electro-induced shape memory effect of 4D printed auxetic composite using PLA/TPU/CNT filament embedded synergistically with continuous carbon fiber: a theoretical & experimental analysis. Compos B Eng 220:10899410.1016/j.compositesb.2021.108994 ↗
26. Liu Y, Boyles JK, Genzer J, Dickey MD (2012) Self-folding of polymer sheets using local light absorption. Soft Matter 8:1764–176910.1039/C1SM06564E ↗
27. Zarei M, Sayedain SS, Askarinya A et al (2023) Improving physio-mechanical and biological properties of 3D-printed PLA scaffolds via in-situ argon cold plasma treatment. Sci Rep 13:1412010.1038/s41598-023-41226-x ↗
28. Ashammakhi N, Ahadian S, Zengjie F et al (2018) Advances and future perspectives in 4D bioprinting. Biotechnol J 13:180014810.1002/biot.201800148 ↗
29. Ding A, Tang F, Alsberg E (2025) 4D printing: a comprehensive review of technologies, materials, stimuli, design, and emerging applications. Chem Rev 125:3663–377110.1021/acs.chemrev.4c00070 ↗
30. Tibbits S, McKnelly C, Olguin C et al (2014) 4D printing and universal transformation. In: Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA). Acadia10.52842/conf.acadia.2014.539 ↗
31. Gurung D (2017) Technological comparison of 3D and 4D printing. Arcada University of Applied Sciences
32. Yang Q, Gao B, Xu F (2020) Recent advances in 4D bioprinting. Biotechnol J 15:190008610.1002/biot.201900086 ↗
33. Waidi YO (2025) Recent advances in 4D-printed shape memory actuators. Macromol Rapid Commun 46:240114110.1002/marc.202401141 ↗
34. Cipollo P, Surrusco B (2004) An Electrically Actuated Pin-Puller for Space Application using Nickel-Titanium Memory Alloy
35. Wang GZ (2007) Effect of martensite transformation on fracture behavior of shape memory alloy NiTi in a notched specimen. Int J Fract 146:93–10410.1007/s10704-007-9148-4 ↗
36. Yan W, Wang CH, Zhang XP, Mai Y-W (2002) Effect of transformation volume contraction on the toughness of superelastic shape memory alloys. Smart Mater Struct 11:94710.1088/0964-1726/11/6/316 ↗
37. Loh CS, Yokoi H, Arai T (2006) New shape memory alloy actuator: design and application in the prosthetic hand. In: 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference. IEEE, pp 6900–690310.1109/IEMBS.2005.1616092 ↗
38. Haga Y, Tanahashi Y, Esashi M (1998) Small diameter active catheter using shape memory alloy. In: Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No. 98CH36176. IEEE, pp 419–42410.1109/MEMSYS.1998.659793 ↗
39. Cladera A, Weber B, Leinenbach C et al (2014) Iron-based shape memory alloys for civil engineering structures: an overview. Constr Build Mater 63:281–29310.1016/j.conbuildmat.2014.04.032 ↗
40. Saghaian SM, Karaca HE, Souri M et al (2016) Tensile shape memory behavior of Ni50. 3Ti29. 7Hf20 high temperature shape memory alloys. Mater Des 101:340–34510.1016/j.matdes.2016.03.163 ↗
41. Mishnaevsky L Jr, Levashov E, Valiev RZ et al (2014) Nanostructured titanium-based materials for medical implants: modeling and development. Mater Sci Eng R Rep 81:1–1910.1016/j.mser.2014.04.002 ↗
42. Yao T, Wang Y, Zhu B et al (2020) 4D printing and collaborative design of highly flexible shape memory alloy structures: a case study for a metallic robot prototype. Smart Mater Struct 30(1):01501810.1088/1361-665X/abcc0a ↗
43. Khalid MY, Arif ZU, Ahmed W et al (2022) 4D printing: technological developments in robotics applications. Sens Actuators A Phys 343:11367010.1016/j.sna.2022.113670 ↗
44. Sheikh A, Abourehab MAS, Kesharwani P (2023) The clinical significance of 4D printing. Drug Discov Today 28:10339110.1016/j.drudis.2022.103391 ↗
45. Liang C, Rogers CA, Malafeew E (1997) Investigation of shape memory polymers and their hybrid composites. J Intell Mater Syst Struct 8:380–38610.1177/1045389X9700800411 ↗
46. Huang WM, Yang B, Zhao Y, Ding Z (2010) Thermo-moisture responsive polyurethane shape-memory polymer and composites: a review. J Mater Chem 20:3367–338110.1039/b922943d ↗
47. Wang K, Man L, Zhang M et al (2023) Programmable polymers with shape memory for biomedical applications. Programm Mater 1:e210.1017/pma.2023.2 ↗
48. Kantareddy SNR, Simpson TW, Ounaies Z, Frecker M (2016) 3D printing of shape changing polymer structures: design and characterization of materials. In: 2016 International Solid Freeform Fabrication Symposium. University of Texas at Austin
49. Chen Y-C, Lagoudas DC (2008) A constitutive theory for shape memory polymers. Part I: large deformations. J Mech Phys Solids 56:1752–176510.1016/j.jmps.2007.12.005 ↗
50. Wang Z, Hansen C, Ge Q et al (2011) Programmable, pattern-memorizing polymer surface. Adv Mater 23:3669–367310.1002/adma.201101571 ↗
51. Bellin I, Kelch S, Langer R, Lendlein A (2006) Polymeric triple-shape materials. Proc Natl Acad Sci U S A 103:18043–1804710.1073/pnas.0608586103 ↗
52. Doostmohammadi H, Baniassadi M, Bodaghi M, Baghani M (2024) 4D printing of magneto-thermo-responsive PLA/PMMA/Fe3O4 nanocomposites with superior shape memory and remote actuation. Macromol Mater Eng 309:240009010.1002/mame.202400090 ↗
53. Senatov FS, Niaza KV, Zadorozhnyy MY et al (2016) Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds. J Mech Behav Biomed Mater 57:139–14810.1016/j.jmbbm.2015.11.036 ↗
54. Thakur V, Singh R, Kumar R et al (2024) Mechanically sustainable and primary recycled thermo-responsive ABS–PLA polymer composites for 4D printing applications: fabrication and studies. Rev Adv Mater Sci 63:2023014910.1515/rams-2023-0149 ↗
55. Nanthananon P, Tanodekaew S, Tesavibul P et al (2022) Enhancing the mechanical properties of photosensitive binder jetting PLA via dual curing and thermal treatment. J Appl Polym Sci 139:5194210.1002/app.51942 ↗
56. Montemurro M, Alaimo G, Panettieri E et al (2024) Design of multi-material structures using material jetting technology: topology optimisation, numerical analysis and experiments. Compos Struct 330:11783810.1016/j.compstruct.2023.117838 ↗
57. Zhang F, Zhu L, Li Z et al (2021) The recent development of vat photopolymerization: a review. Addit Manuf 48:102423
58. Pagac M, Hajnys J, Ma Q-P et al (2021) A review of vat photopolymerization technology: materials, applications, challenges, and future trends of 3d printing. Polymers 13:59810.3390/polym13040598 ↗
59. Ahn D-G (2021) Directed energy deposition (DED) process: state of the art. Int J Precis Eng Manuf-Green Technol 8:703–74210.1007/s40684-020-00302-7 ↗
60. Singh DD, Mahender T, Reddy AR (2021) Powder bed fusion process: a brief review. Mater Today Proc 46:350–35510.1016/j.matpr.2020.08.415 ↗
61. Yan D, Zeng B, Han Y et al (2020) Preparation and laser powder bed fusion of composite microspheres consisting of poly (lactic acid) and nano-hydroxyapatite. Addit Manuf 34:101305
62. Reddy BY, Siddhartha M, Reddy PSR, Lakshmi AA (2023) Influence of process parameters on sheet lamination method-based 3D printing: A Review. In: E3S Web of Conferences. EDP Sciences, p 0125110.1051/e3sconf/202343001251 ↗
63. Gibson I, Rosen D, Stucker B, et al (2021) Sheet lamination. Additive Manufacturing Technologies 253–28310.1007/978-3-030-56127-7_9 ↗
64. Hosseinzadeh M, Ghoreishi M, Narooei K (2023) 4D printing of shape memory polylactic acid beams: an experimental investigation into FDM additive manufacturing process parameters, mathematical modeling, and optimization. J Manuf Process 85:774–78210.1016/j.jmapro.2022.12.006 ↗
65. Saptaji K, Rochmad CO, Juniasih OA et al (2023) Enhancing shape-recovery ratio of 4D printed polylactic acid (PLA) structures through processing parameter optimization. Prog Addit Manuf. https://doi.org/10.1007/s40964-023-00551-310.1007/s40964-023-00551-3 ↗
66. Tezerjani SMD, Yazdi MS, Hosseinzadeh MH (2022) The effect of 3D printing parameters on the shape memory properties of 4D printed polylactic acid circular disks: an experimental investigation and parameters optimization. Mater Today Commun 33:10426210.1016/j.mtcomm.2022.104262 ↗
67. Gantenbein S, Masania K, Woigk W et al (2018) Three-dimensional printing of hierarchical liquid-crystal-polymer structures. Nature 561:226–23010.1038/s41586-018-0474-7 ↗
68. Razzaq MY, Gonzalez-Gutierrez J, Mertz G et al (2022) 4D printing of multicomponent shape-memory polymer formulations. Appl Sci 12:788010.3390/app12157880 ↗
69. Cadete MS, Gomes TEP, Gonçalves I, Neto V (2025) Influence of 3D-printing deposition parameters on crystallinity and morphing properties of PLA-based materials. Prog Addit Manuf 10:127–13710.1007/s40964-024-00608-x ↗
70. Pivar M, Gregor-Svetec D, Muck D (2021) Effect of printing process parameters on the shape transformation capability of 3D printed structures. Polymers (Basel) 14:11710.3390/polym14010117 ↗
71. Madbouly SA, Lendlein A (2010) Shape-memory polymer composites. Shape-Memory Polymers 41–9510.1007/978-3-642-12359-7_28 ↗
72. Huang WM, Ding Z, Wang CC et al (2010) Shape memory materials. Mater Today 13:54–6110.1016/S1369-7021(10)70128-0 ↗
73. Sun L, Huang WM, Ding Z et al (2012) Stimulus-responsive shape memory materials: a review. Mater Des 33:577–64010.1016/j.matdes.2011.04.065 ↗
74. Huang WM, Zhao Y, Wang CC et al (2012) Thermo/chemo-responsive shape memory effect in polymers: a sketch of working mechanisms, fundamentals and optimization. J Polym Res 19:1–3410.1007/s10965-012-9952-z ↗
75. Leng J, Lan X, Liu Y, Du S (2010) Multifunctional polymeric smart materials. Multifunctional Polymer Nanocomposites; CRC Press: Boca Raton, FL, USA 47–13410.1201/b10462-4 ↗
76. Yakacki CM, Satarkar NS, Gall K et al (2009) Shape-memory polymer networks with Fe3O4 nanoparticles for remote activation. J Appl Polym Sci 112:3166–317610.1002/app.29845 ↗
77. Zhu Y, Hu J, Luo H et al (2012) Rapidly switchable water-sensitive shape-memory cellulose/elastomer nano-composites. Soft Matter 8:2509–251710.1039/c2sm07035a ↗
78. Wang CC, Huang WM, Ding Z et al (2012) Cooling-/water-responsive shape memory hybrids. Compos Sci Technol 72:1178–118210.1016/j.compscitech.2012.03.027 ↗
79. Meng H, Li G (2013) A review of stimuli-responsive shape memory polymer composites. Polymer (Guildf) 54:2199–222110.1016/j.polymer.2013.02.023 ↗
80. Xie H, He M, Deng X-Y et al (2016) Design of poly (L-lactide)–poly (ethylene glycol) copolymer with light-induced shape-memory effect triggered by pendant anthracene groups. ACS Appl Mater Interfaces 8:9431–943910.1021/acsami.6b00704 ↗
81. Raja M, Ryu SH, Shanmugharaj AM (2013) Thermal, mechanical and electroactive shape memory properties of polyurethane (PU)/poly (lactic acid)(PLA)/CNT nanocomposites. Eur Polym J 49:3492–350010.1016/j.eurpolymj.2013.08.009 ↗
82. Liu H, Wang F, Wu W et al (2023) 4D printing of mechanically robust PLA/TPU/Fe3O4 magneto-responsive shape memory polymers for smart structures. Compos Part B Eng 248:11038210.1016/j.compositesb.2022.110382 ↗
83. Behl M, Zotzmann J, Lendlein A (2009) Shape-memory polymers and shape-changing polymers. Shape-Memory Polymers 1–4010.1007/12_2009_26 ↗
84. Mather PT, Luo X, Rousseau IA (2009) Shape memory polymer research. Annu Rev Mater Res 39:445–47110.1146/annurev-matsci-082908-145419 ↗
85. Migneco F, Huang Y-C, Birla RK, Hollister SJ (2009) Poly (glycerol-dodecanoate), a biodegradable polyester for medical devices and tissue engineering scaffolds. Biomaterials 30:6479–648410.1016/j.biomaterials.2009.08.021 ↗
86. Garle A, Kong S, Ojha U, Budhlall BM (2012) Thermoresponsive semicrystalline poly (ε-caprolactone) networks: exploiting cross-linking with cinnamoyl moieties to design polymers with tunable shape memory. ACS Appl Mater Interfaces 4:645–65710.1021/am2011542 ↗
87. Lendlein A, Schmidt AM, Langer R (2001) AB-polymer networks based on oligo (ɛ-caprolactone) segments showing shape-memory properties. Proc Natl Acad Sci U S A 98:842–847
88. Schawe JEK (2016) Cooling rate dependence of the crystallinity at nonisothermal crystallization of polymers: a phenomenological model. J Appl Polym Sci. https://doi.org/10.1002/app.4297710.1002/app.42977 ↗
89. Yang Y, Chen Y, Wei Y, Li Y (2016) 3D printing of shape memory polymer for functional part fabrication. Int J Adv Manuf Technol 84:2079–209510.1007/s00170-015-7843-2 ↗
90. Beloshenko VA, Varyukhin VN, Voznyak YV (2005) The shape memory effect in polymers. Russ Chem Rev 74:26510.1070/RC2005v074n03ABEH000876 ↗
91. Xie T (2011) Recent advances in polymer shape memory. Polymer (Guildf) 52:4985–500010.1016/j.polymer.2011.08.003 ↗
92. Kushner AM, Vossler JD, Williams GA, Guan Z (2009) A biomimetic modular polymer with tough and adaptive properties. J Am Chem Soc 131:8766–876810.1021/ja9009666 ↗
93. Li J, Viveros JA, Wrue MH, Anthamatten M (2007) Shape-memory effects in polymer networks containing reversibly associating side-groups. Adv Mater 19:2851–285510.1002/adma.200602260 ↗
94. Zhao Y, Chun Wang C, Min Huang W, Purnawali H (2011) Buckling of poly (methyl methacrylate) in stimulus-responsive shape recovery. Appl Phys Lett. https://doi.org/10.1063/1.364500510.1063/1.3645005 ↗
95. Yang F, Li JCM (1997) Impression recovery of PMMA. J Mater Res 12:2809–281410.1557/JMR.1997.0374 ↗
96. Page KA, Cable KM, Moore RB (2005) Molecular origins of the thermal transitions and dynamic mechanical relaxations in perfluorosulfonate ionomers. Macromolecules 38:6472–648410.1021/ma0503559 ↗
97. Wagermaier W, Kratz K, Heuchel M, Lendlein A (2010) Characterization methods for shape-memory polymers. Shape-Memory Polymers 97–14510.1007/12_2009_25 ↗
98. Hu J, Meng H, Li G, Ibekwe SI (2012) A review of stimuli-responsive polymers for smart textile applications. Smart Mater Struct 21:05300110.1088/0964-1726/21/5/053001 ↗
99. Li F, Zhu W, Zhang X et al (1999) Shape memory effect of ethylene–vinyl acetate copolymers. J Appl Polym Sci 71:1063–107010.1002/(SICI)1097-4628(19990214)71:7<1063::AID-APP4>3.0.CO;2-A ↗
100. Huang WM, Yang B, Fu YQ (2012) Polyurethane shape memory polymers. CRC Press, Boca Raton, FL