Functionally graded A6061-TiB2 in-situ nano-composites by high shear dispersion mixing assisted centrifugal casting technique
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Inegbenebor AO, Bolu CA, Babalola PO, Inegbenebor AI, Fayomi OSI (2018) Aluminum silicon carbide particulate metal matrix composite development via stir casting processing. SILICON 10(2):343–347. https://doi.org/10.1007/s12633-016-9451-710.1007/s12633-016-9451-7 ↗
2. Sharifitabar M, Sarani A, Khorshahian S, Shafiee Afarani M (2011) Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route. Mater Des 32(8–9):4164–4172. https://doi.org/10.1016/j.matdes.2011.04.04810.1016/j.matdes.2011.04.048 ↗
3. Dou Y, Liu Y, Liu Y, Xiong Z, Xia Q (2014) Friction and wear behaviors of B4C/6061Al composite. Mater Des 60:669–677. https://doi.org/10.1016/j.matdes.2014.04.01610.1016/j.matdes.2014.04.016 ↗
4. Chen F, Chen Z, Mao F, Wang T, Cao Z (2015) TiB2 reinforced aluminum based in situ composites fabricated by stir casting. Mater Sci Eng A 625:357–368. https://doi.org/10.1016/j.msea.2014.12.03310.1016/j.msea.2014.12.033 ↗
5. Karbalaei Akbari M, Rajabi S, Shirvanimoghaddam K, Baharvandi HR (2015) Wear and friction behavior of nanosized TiB2 and TiO2 particle-reinforced casting A356 aluminum nanocomposites: a comparative study focusing on particle capture in matrix. J Compos Mater 49(29):3665–3681. https://doi.org/10.1177/002199831456832710.1177/0021998314568327 ↗
6. Wang M, Chen D, Chen Z, Wu Y, Wang F, Ma N, Wang H (2014) Mechanical properties of in-situ TiB2/A356 composites. Mater Sci Eng A 590:246–254. https://doi.org/10.1016/j.msea.2013.10.02110.1016/j.msea.2013.10.021 ↗
7. Mandal A, Chakraborty M, Murty BS (2007) Effect of TiB2 particles on sliding wear behaviour of Al-4Cu alloy. Wear. 262(1–2):160–166. https://doi.org/10.1016/j.wear.2006.04.00310.1016/j.wear.2006.04.003 ↗
8. Sobczak JJ, Drenchev L (2013) Metallic functionally graded materials: a specific class of advanced composites. J Mater Sci Technol 29(4):297–316. https://doi.org/10.1016/j.jmst.2013.02.00610.1016/j.jmst.2013.02.006 ↗
9. Rajan TPD, Pai BC (2014) Developments in processing of functionally gradient metals and metal-ceramic composites: a review. Acta Metallurgica Sinica (English Letters) 27(5):825–838. https://doi.org/10.1007/s40195-014-0142-310.1007/s40195-014-0142-3 ↗
10. Saleh BI, Ahmed MH (2020) Development of functionally graded tubes based on pure Al/Al2O3 metal matrix composites manufactured by centrifugal casting for automotive applications. Met Mater Int 26(9):1430–1440. https://doi.org/10.1007/s12540-019-00391-310.1007/s12540-019-00391-3 ↗
11. Saleh B, Jiang J, Ma A, Song D, Yang D (2019) Effect of main Parameters on the mechanical and wear behaviour of functionally graded materials by centrifugal casting: a review. Met Mater Int 25(6):1395–1409. https://doi.org/10.1007/s12540-019-00273-810.1007/s12540-019-00273-8 ↗
12. Sindhu N, Goyal RK, Thankachan TP, Unnikrishnan TPDR, Sreemanu VM Sreekumar (2021) Study on Al/TiB2 functionally graded metal matrix composites. Mater Today: Proc 44:2945–2951. https://doi.org/10.1016/j.matpr.2021.01.93410.1016/j.matpr.2021.01.934 ↗
13. El-Galy IM, Ahmed MH, Bassiouny BI (2017) Characterization of functionally graded Al-SiCp metal matrix composites manufactured by centrifugal casting. Alexandria Eng J 56(4):371–381. https://doi.org/10.1016/j.aej.2017.03.00910.1016/j.aej.2017.03.009 ↗
14. Radhika N (2017) Mechanical properties and abrasive wear behaviour of functionally graded Al-Si12Cu/Al2O3 metal matrix composite Trans. Indian Inst Met 70(1):145–157. https://doi.org/10.1007/s12666-016-0870-310.1007/s12666-016-0870-3 ↗
15. Sindhu N, Goyal RK, Sreekumar VM (2024) Formation, dispersion and distribution of TiB2 particles in in-situ Al-TiB2 functionally graded nanocomposites Metall. Mater Trans A 55(5):1654–1672. https://doi.org/10.1007/s11661-024-07359-y10.1007/s11661-024-07359-y ↗
16. Sreekumar VM, Eskin DG (2016) A new Al-Zr-Ti master alloy for ultrasonic grain refinement of wrought and foundry aluminum alloys. JOM 68(12):3088–3093. https://doi.org/10.1007/s11837-016-2120-x10.1007/s11837-016-2120-x ↗
17. Liu Z, Han Q, Li J, Huang W (2012) Effect of ultrasonic vibration on microstructural evolution of the reinforcements and degassing of in-situ TiB2/Al-12Si-4Cu composites. J Mater Process Technol 212(2):365–371. https://doi.org/10.1016/j.jmatprotec.2011.09.02110.1016/j.jmatprotec.2011.09.021 ↗
18. Yang Y, Lan J, Li X (2004) Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy Mater. Sci Eng A 380(1–2):378–383. https://doi.org/10.1016/j.msea.2004.03.07310.1016/j.msea.2004.03.073 ↗
19. Tamayo-Ariztondo J, Madam SV, Djan E, Eskin DG, Babu NH, Fan Z (2014) Nanoparticles distribution and mechanical properties of aluminum-matrix nano-composites treated with external fields Light Metals. Springer, Berlin, pp 1411–1415
20. Zeng Y, Himmler D, Randelzhofer P, Körner C (2019) Microstructures and mechanical properties of Al3Ti/Al composites produced in-Situ by high shearing technology. Adv Eng Mater 21(4):1800259. https://doi.org/10.1002/adem.20180025910.1002/adem.201800259 ↗
21. Theerthagiri J, Karuppasamy K, Lee SJ, Shwetharani R, Kim HS, Pasha SKK, Ashokkumar M, Choi M (2022) Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications. Light-Sci App 11:250. https://doi.org/10.1038/s41377-022-00904-710.1038/s41377-022-00904-7 ↗
22. Yu Y, Lee S, Theerthagiri J, Lee Y, Choi M (2022) Architecting the AuPt alloys for hydrazine oxidation as an anolyte in fuel cell: comparative analysis of hydrazine splitting and water splitting for energy-saving H2 generation. Appl Catal B: Environ 316:121603. https://doi.org/10.1016/j.apcatb.2022.12160310.1016/j.apcatb.2022.121603 ↗
23. Lee H, Theerthagiri J, Kumari MLA, Min A, Moon C, Anbazhagan V, Brutchey RL, Choi M (2024) Leveraging phosphate group in Pd/PdO decorated nickel phosphate microflowers via pulsed laser for robust hydrogen production in hydrazine-assisted electrolyzer. Int J Hydrogen Energy 57:176–186. https://doi.org/10.1016/j.ijhydene.2024.01.02910.1016/j.ijhydene.2024.01.029 ↗
24. Bashir N, Iqbal A (2024) Characterizing laser-modified microstructures and electrical and mechanical properties of Al-15.3%Si(wt%) Alloys. J Mater Eng Perf 33:2196–2208. https://doi.org/10.1007/s11665-023-08148-110.1007/s11665-023-08148-1 ↗
25. Sahafi MH, Cholaki E, Bashir AI (2024) First-principles calculations to investigate phonon dispersion, mechanical, elastic anisotropy and thermodynamic properties of an actinide-pnictide ceramic at high pressures/temperatures. Results Phys 58:107495. https://doi.org/10.1016/j.rinp.2024.10749510.1016/j.rinp.2024.107495 ↗
26. Liu Y, Wang R, Peng C, Cai Z, Zhou Z, Li X, Cao X (2021) Microstructures and mechanical properties of in-situ TiB2/Al−xSi−0.3Mg composites. Trans Nonferrous Met Soc China 31(2):331–344. https://doi.org/10.1016/S1003-6326(21)65499-710.1016/S1003-6326(21)65499-7 ↗
27. Panda E, Mazumdar D, Mehrotra SP (2006) Mathematical modeling of particle segregation during centrifugal casting of metal matrix composites. Metall Mater Tras A 37:1675–1687. https://doi.org/10.1007/s11661-006-0109-810.1007/s11661-006-0109-8 ↗
28. Paul EL, Atiemo-Obeng VA, Kresta SM (2004) Handbook of industrial mixing : science and practiceWiley-Interscience Hoboken, pp 479–505 https://doi.org/10.1002/047145145210.1002/0471451452 ↗
29. Rumpf H (1962) The strength of granules and agglomerates. Agglomeration, pp 379–418
30. Yang X, Huang Y, Barekar NS, Das S, Stone IC, Fan Z (2016) High shear dispersion technology prior to twin roll casting for high performance magnesium/SiCp metal matrix composite strip fabrication. Compos Part A 90:349–358. https://doi.org/10.1016/j.compositesa.2016.07.02510.1016/j.compositesa.2016.07.025 ↗
31. Sunil M, Nidhi S, Goyal RK, Das S, Rajan TPD, Sreekumar VM (2025) Property evaluation of centrifugally cast A356/Al2O3 nanocomposites synthesized using high shear mixing technique. Inter Cast Metal Res. https://doi.org/10.1080/13640461.2025.249034810.1080/13640461.2025.2490348 ↗
32. Eskin DG, Tzanakis I, Wang F, Lebon GSB, Subroto T, Pericleous K, Mi J (2019) Fundamental studies of ultrasonic melt processing Ultrason. Sonochem 52:455–467. https://doi.org/10.1016/j.ultsonch.2018.12.02810.1016/j.ultsonch.2018.12.028 ↗
33. Kumar S, Subramaniya Sarma V, Murty BS (2010) Functionally graded Al alloy matrix in-situ composites. Metall Mater Trans A41(1):242–254. https://doi.org/10.1007/s11661-009-0063-310.1007/s11661-009-0063-3 ↗
34. Rajan TPD, Pillai RM, Pai BC (2010) Characterization of centrifugal cast functionally graded aluminum-silicon carbide metal matrix composites. Mater Charact 61(10):923–928. https://doi.org/10.1016/j.matchar.2010.06.00210.1016/j.matchar.2010.06.002 ↗
35. Jayakumar E, Jacob JC, Rajan TPD, Joseph MA, Pai BC (2016) Processing and characterization of functionally graded aluminum (A319)—SiCp metallic composites by centrifugal casting technique. Metall Mater Trans A 47(8):4306–4315. https://doi.org/10.1007/s11661-016-3558-810.1007/s11661-016-3558-8 ↗
36. Jojith R, Radhika N (2020) Investigation of mechanical and tribological behaviour of heat-treated functionally graded Al-7Si/B4C composite. Silicon 12:2073–2085. https://doi.org/10.1007/s12633-019-00294-310.1007/s12633-019-00294-3 ↗
37. Qi F, Wu G, Tong X, Sun M, Zhang L, Sun J, Guo Y (2024) Insight into the microstructure configuration and strengthening mechanisms of a cast in-situ Al3Zr reinforced Al–Li matrix composite. Compos. Commun. 45:101809. https://doi.org/10.1016/j.coco.2023.10180910.1016/j.coco.2023.101809 ↗
38. Wang T, Chen Z, Zheng Y, Zhao Y, Kang H, Gao L (2014) Development of TiB2 reinforced aluminum foundry alloy based in situ composites-Part II: enhancing the practical aluminum foundry alloys using the improved Al-5 wt% TiB2 master composite upon dilution. Mater Sci Eng A 605:22–32. https://doi.org/10.1016/j.msea.2014.03.02110.1016/j.msea.2014.03.021 ↗
39. Ferguson JB, Lopez HF, Rohatgi PK, Cho K, Kim CS (2014) Impact of volume fraction and size of reinforcement particles on the grain size in metal-matrix micro and nanocomposites. Metall Mater Trans A 45(9):4055–4061. https://doi.org/10.1007/s11661-014-2358-210.1007/s11661-014-2358-2 ↗
40. Sreekumar VM, Hari Babu N, Eskin DG, Fan Z (2015) Structure-property analysis of in-situ Al-MgAl2O4 metal matrix composites synthesized using ultrasonic cavitation. Mater Sci Eng A 628:30–40. https://doi.org/10.1016/j.msea.2015.01.02910.1016/j.msea.2015.01.029 ↗
41. Yang Y, Li K, Bu Y, Wu J, Fang Y, Meng L, Liu J, Wang H (2021) Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys. Script Mater 195:113741. https://doi.org/10.1016/j.scriptamat10.1016/j.scriptamat ↗
42. Zhang Z, Chen DL (2008) Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites. Mater Sci Eng A 483–484(1–2C):148–152. https://doi.org/10.1016/j.msea.2006.10.18410.1016/j.msea.2006.10.184 ↗
43. Zhang Z, Chen DL (2006) Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength. Scr Mater 54(7):1321–1326. https://doi.org/10.1016/j.scriptamat.2005.12.01710.1016/j.scriptamat.2005.12.017 ↗
44. Sree Manu KM, Arun Kumar S, Rajan TPD, Riyas Mohammed M, Pai BC (2017) Effect of alumina nanoparticle on strengthening of Al-Si alloy through dendrite refinement, interfacial bonding and dislocation bowing. J Alloys Com 712:394–405. https://doi.org/10.1016/j.jallcom.2017.04.10410.1016/j.jallcom.2017.04.104 ↗
45. Anestiev L (2024) A theoretical interpretation of the experimental results of an investigation of the thermal expansion mismatch strengthening in an Al-based metal matrix composite reinforced with nano-sized TiCN Particulates. J Mater Eng Perform 33:3920–3928. https://doi.org/10.1007/s11665-023-09080-010.1007/s11665-023-09080-0 ↗
46. Cottrell AH (1953) Dislocations and plastic flow in crystals. Oxford University Press, Oxford, p 1953
47. Vogt R, Zhang Z, Li Y, Bonds M, Browning ND, Lavernia EJ, Schoenung JM (2009) The absence of thermal expansion mismatch strengthening in nanostructured metal-matrix composites. Scr Mater 61(11):1052–1055. https://doi.org/10.1016/j.scriptamat.2009.08.02510.1016/j.scriptamat.2009.08.025 ↗
48. Ghahremani A, Abdullah A, Fallahi Arezoodar A (2022) Wear behavior of metal matrix nanocomposites. Ceram Int 48(24):35947–35965. https://doi.org/10.1016/j.ceramint.2022.09.27310.1016/j.ceramint.2022.09.273 ↗
49. Karun AS, Rajan TPD, Pillai UTS, Pai BC, Rajeev VR, Farook A (2016) Enhancement in tribological behaviour of functionally graded SiC reinforced aluminium composites by centrifugal casting. J Compos Mater 50(16):2255–2269. https://doi.org/10.1177/002199831560294610.1177/0021998315602946 ↗