Current status and development trends of corrosion research in Fe-based amorphous alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electromagnetic wave absorption materials · Magnetic Properties of Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Wang WH, Dong C, Shek CH (2004) Bulk metallic glasses. Mater Sci Eng R Rep 44:45–8910.1016/j.mser.2004.03.001 ↗
2. Li J, Doubek G, McMillon-Brown L et al (2019) Recent advances in metallic glass nanostructures: synthesis strategies and electrocatalytic applications. Adv Mater. https://doi.org/10.1002/adma.20180212010.1002/adma.201802120 ↗
3. Silveyra JM, Ferrara E, Huber DL et al (2018) Soft magnetic materials for a sustainable and electrified world. Science 362:eaao019510.1126/science.aao0195 ↗
4. Li X, Wang T, Wang Xi et al (2025) Bioinspired cilia tactile sensor based on soft magnetic amorphous ribbon. IEEE Trans Instrum Meas 74:1–8
5. Jian XiYing, Li H-W, Lin H-J (2025) Regulation strategies of amorphous alloys and their applications in energy materials. Sci Sin Phys Mech Astron 55:28611110.1360/SSPMA-2024-0349 ↗
6. Wang YB, Li HF, Zheng YF et al (2010) Correlation between corrosion performance and surface wettability in Artinite bulk metallic glasses. Appl Phys Lett 96:25190910.1063/1.3429591 ↗
7. Nhab C, Zla C, Qwa C et al (2020) Effects of crystallization on mechanical behavior and corrosion performance of a ductile Zr68Al8Ni8Cu16 bulk metallic glass. J Non-Cryst Solids 529:11978210.1016/j.jnoncrysol.2019.119782 ↗
8. Han Y, Inoue A, Kong FL et al (2016) Softening and good ductility for nanocrystal-dispersed amorphous Fe-Co-B alloys with high saturation magnetization above 1.7 T. J Alloys Compd 657:237–24510.1016/j.jallcom.2015.10.066 ↗
9. Morrison ML, Buchanan RA, Peker A et al (2007) Electrochemical behavior of a Ti-based bulk metallic glass. J Non-Cryst Solids 353:2115–212410.1016/j.jnoncrysol.2007.03.012 ↗
10. Song Q, Zhang J, Zhu Z et al (2025) A novel B2O3 high-temperature purification of Ni–P alloys for the preparation of bulk Ni-based amorphous alloys. Mater Today Commun 43:11169610.1016/j.mtcomm.2025.111696 ↗
11. Zhang YR, Yang D, Xiang QC et al (2025) Enhancement of bending toughness for Fe-based amorphous nanocrystalline alloy with deep cryogenic-cycling treatment. China Foundry 22:99–10710.1007/s41230-024-4096-4 ↗
12. Guo SF, Chan KC, Liu L (2011) Notch toughness of Fe-based bulk metallic glass and composites. J Alloys Compd 509:9441–944610.1016/j.jallcom.2011.07.016 ↗
13. Lei C, Lei J, Yang Z et al (2013) Improved micro fluxgate sensor with double-layer Fe-based amorphous core. Microsyst Technol 19:167–17210.1007/s00542-012-1523-z ↗
14. Li X, Li L, Sohrabi S et al (2024) Ultrasonic vibration enabled under-liquid forming of metallic glasses. Sci Bull 69:163–16610.1016/j.scib.2023.11.049 ↗
15. Pei C, Chen S, Zhou M et al (2023) Direct urea/H2O2 fuel cell with a hierarchical porous nanoglass anode for high-efficiency energy conversion. ACS Appl Mater Interfaces 15:24319–2432810.1021/acsami.3c00774 ↗
16. Zhang J, Li G, Yifei Qu et al (2022) Fabrication and hemocompatibility evaluation of a robust honeycomb nanostructure on medical pure titanium surface. ACS Appl Mater Interfaces 14:9807–982310.1021/acsami.1c22818 ↗
17. Klement W, Willens RH, Duwez P (1960) Non-crystalline structure in solidified gold-silicon alloys. Nature 187:869–87010.1038/187869b0 ↗
18. Naka M (1974) Corrosion resistance of amorphous ferroalloys with chromium. Nippon Kinzoku Gakkaishi 38:835–838
19. Zhang J, Qin Y, Liu X et al (2025) Stress-induced magnetic anisotropy in Fe-based amorphous/nanocrystalline alloys: mechanisms, advances and challenges. Materials 18:149910.3390/ma18071499 ↗
20. Cao S, Liu G, Huang J et al (2024) Atomic level simulation of amorphous/nanocrystalline transition behavior in the Fe based amorphous alloys. J Non-Cryst Solids 624:12272610.1016/j.jnoncrysol.2023.122726 ↗
21. Nguyen MP, Yoshida S, Okamoto S et al (2024) Fe-based amorphous powder cores with low core loss and improvement of permeability. AIP Adv. https://doi.org/10.1063/9.000077110.1063/9.0000771 ↗
22. Wang G, Jiang Y, Zhou Z et al (2025) Preparation and corrosion resistance research of eco-friendly strong penetration sealant for Fe-based amorphous coatings. Coatings 15:62310.3390/coatings15060623 ↗
23. Okamura Y, Ikoma K, Nagatomo T (2022) Preventive measures of fretting wear in railway axle bearings: Combined effect of grooving and amorphous carbon coating towards their backing rings. Eng Fail Anal 137:10635610.1016/j.engfailanal.2022.106356 ↗
24. Lua ZC, Wangb SL, Wua Y, Lua ZP, Lia HX (2019) Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications. Progress Mater Sci 103:235–31810.1016/j.pmatsci.2019.01.003 ↗
25. Cao M, Li W, Li T et al (2024) Polymetallic amorphous materials: research progress in synthetic strategies and electrocatalytic applications. J Mater Chem A 12:15541–1555710.1039/D4TA01418A ↗
26. Zhou J, You J, Qiu K (2022) Advances in Fe-based amorphous/nanocrystalline alloys. J Appl Phys 132:04070210.1063/5.0092662 ↗
27. Jiang L, Bao M, Dong Y et al (2023) Processing, production and anticorrosion behavior of metallic glasses: a critical review. J Non-Cryst Solids 612:12235510.1016/j.jnoncrysol.2023.122355 ↗
28. Zhang C, Ouyang Di, Pauly S et al (2021) 3D printing of bulk metallic glasses. Mater Sci Eng R Rep 145:10062510.1016/j.mser.2021.100625 ↗
29. Urata A, Nishiyama N, Amiya K et al (2007) Continuous casting of thick Fe-base glassy plates by twin-roller melt-spinning. Mater Sci Eng, A 449–451:269–27210.1016/j.msea.2006.02.341 ↗
30. Wang A, Zhao C, Men He et al (2015) Fe-based amorphous alloys for wide ribbon production with high Bs and outstanding amorphous forming ability. J Alloys Compd 630:209–21310.1016/j.jallcom.2015.01.056 ↗
31. Xu DD, Zhou BL, Wang QQ et al (2018) Effects of Cr addition on thermal stability, soft magnetic properties and corrosion resistance of FeSiB amorphous alloys. Corros Sci 138:20–2710.1016/j.corsci.2018.04.006 ↗
32. Li R, Wu R, Li Z et al (2023) Boosting oxygen-evolving activity via atom-stepped interfaces architected with kinetic frustration. Adv Mater. https://doi.org/10.1002/adma.20220689010.1002/adma.202206890 ↗
33. Dan Z, Makino A, Hara N (2013) Effects of P addition on corrosion properties of soft magnetic FeSiB alloys. Mater Trans 54:1691–169610.2320/matertrans.MAW201307 ↗
34. Dan Z, Takenaka K, Zhang Y et al (2014) Effect of Si addition on the corrosion properties of amorphous Fe-based soft magnetic alloys. J Non-Cryst Solids 402:36–4310.1016/j.jnoncrysol.2014.05.007 ↗
35. Zhang H, Yan ZC, Chen Q et al (2021) Corrosion comparison of free and roller surfaces of Fe70Si8B12Nb10 amorphous ribbon. RSC Adv 11:32085–3209410.1039/D1RA05747B ↗
36. Enayati MH, Mohamed FA (2014) Application of mechanical alloying/milling for synthesis of nanocrystalline and amorphous materials. Int Mater Rev 59:394–41610.1179/1743280414Y.0000000036 ↗
37. Li X, Yuying Wu, Yang S et al (2019) Preparation and degradation property of magnetic FePBCSi amorphous alloy powder. J Non-Cryst Solids 503–504:284–28710.1016/j.jnoncrysol.2018.10.010 ↗
38. Ghajari Marko F et al (2015) Influence of milling time on microstructure and magnetic properties of Fe80P11C9 alloy produced by mechanical alloying. J Magn Magn Mater 395:354–36010.1016/j.jmmm.2015.07.073 ↗
39. Yekta EB, Taghvaei AH, Sharafi S (2018) The effect of metalloid content on glass forming ability, thermal stability and magnetic properties of Fe-Ta-Si-C powders prepared by mechanical alloying. J Non-Cryst Solids 500:110–12010.1016/j.jnoncrysol.2018.06.040 ↗
40. Farmer J, Choi JS, Cheng S et al (2009) Iron-based amorphous metals: high-performance corrosion-resistant material development. Metall Mater Trans A 40:1289–130510.1007/s11661-008-9779-8 ↗
41. Zhao T, Chen C, Wu XJ et al (2021) FeSiBCrC amorphous magnetic powder fabricated by gas-water combined atomization. J Alloys Compd 857:15799110.1016/j.jallcom.2020.157991 ↗
42. Otsuka I, Wada K, Maeta Y, Kadomura T, Yagi M (2008) Magnetic properties of Fe-based amorphous powders with high-saturation induction produced by spinning water atomization Process (SWAP). IEEE Trans Magn 44(11):3891–389410.1109/TMAG.2008.2002249 ↗
43. Wang R, Jia J, Wu Y et al (2024) Magnetic properties of soft magnetic composites prepared by gas-atomized glassy powders from a new Fe-based alloy with high glass-forming ability. Sci China Phys Mech Astron. https://doi.org/10.1007/s11433-024-2441-310.1007/s11433-024-2441-3 ↗
44. Suslick KS, Choe S-B, Cichowlas AA et al (1991) Sonochemical synthesis of amorphous iron. Nature 353:414–41610.1038/353414a0 ↗
45. Inoue A, Shinohara Y, Gook JS (1995) Thermal and magnetic properties of bulk Fe-based glassy alloys prepared by copper mold casting. Mater Trans, JIM 36:1427–143310.2320/matertrans1989.36.1427 ↗
46. Inoue A, Zhang T, Takeuchi A (1997) Bulk amorphous alloys with high mechanical strength and good soft magnetic properties in Fe–TM–B (TM=IV–VIII group transition metal) system. Appl Phys Lett 71:464–46610.1063/1.119580 ↗
47. Koshiba SH (2000) High strength and good soft magnetic properties of bulk glassy Fe-Mo-Ga-P-C-B alloys with high glass-forming ability. Mater Trans, JIM 41:1478–148110.2320/matertrans1989.41.1478 ↗
48. Ponnambalam V, Poon SJ, Shiflet GJ et al (2003) Synthesis of iron-based bulk metallic glasses as nonferromagnetic amorphous steel alloys. Appl Phys Lett 83:1131–113310.1063/1.1599636 ↗
49. Guo SF, Chan KC, Xie SH et al (2013) Novel centimeter-sized Fe-based bulk metallic glass with high corrosion resistance in simulated acid rain and seawater. J Non-Cryst Solids 369:29–3310.1016/j.jnoncrysol.2013.02.026 ↗
50. Ponnambalam V, Poon SJ, Shiflet GJ (2004) Fe-based bulk metallic glasses with diameter thickness larger than one centimeter. J Mater Res 19:1320–132310.1557/JMR.2004.0176 ↗
51. Shen J, Chen Q, Sun J et al (2005) Exceptionally high glass-forming ability of an FeCoCrMoCBY alloy. Appl Phys Lett. https://doi.org/10.1063/1.189742610.1063/1.1897426 ↗
52. Mahbooba Z, Thorsson L, Unosson M et al (2018) Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness. Appl Mater Today 11:264–26910.1016/j.apmt.2018.02.011 ↗
53. Wang L, Wang H, Liu Y et al (2019) Selective laser melting helps fabricate record-large bulk metallic glass: experiments, simulation and demonstrative part. J Alloy Compd 808:15173110.1016/j.jallcom.2019.151731 ↗
54. Zhou LLW (2016) Influence of Ca addition on microstructural evolution and mechanical properties of near-eutectic Mg-Li alloys by copper-mold suction casting. J Alloys Compd 664:85–9110.1016/j.jallcom.2015.12.198 ↗
55. Inoue A, Gook J (1995) Fe-based ferromagnetic glassy alloys with wide supercooled liquid region. Mater Trans, JIM 36:1180–118310.2320/matertrans1989.36.1180 ↗
56. Pang S, Zhang T, Asami K et al (2002) Effects of chromium on the glass formation and corrosion behaviorof bulk glassy Fe–Cr–Mo–C–B alloys. Mater Trans 43:2137–214210.2320/matertrans.43.2137 ↗
57. Chen HS, Turnbull D (1969) Formation, stability and structure of palladium-silicon based alloy glasses. Acta Metall 17:1021–103110.1016/0001-6160(69)90048-0 ↗
58. Yamamoto T, Yodoshi N, Bitoh T et al (2008) Soft magnetic Fe-based metallic glasses prepared by fluxing and water-quenching. Recent Patents Nanotechnol 2:137–14510.2174/187221008784534541 ↗
59. Gong P, Yao K, Ding H (2013) Centimeter-sized Ti-BASED quaternary bulk metallic glass prepared by water quenching. Int J Mod Phys B 27:135008710.1142/S0217979213500872 ↗
60. Li JF, Wang X, Liu X et al (2018) Effect of fluxing treatment on the properties of Fe66Co15Mo1P7.5C5.5B2Si3 bulk metallic glass by water quenching. Physica B 528:24–2610.1016/j.physb.2017.10.061 ↗
61. Jung HY, Choi SJ, Prashanth KG, Stoica M, Scudino S, Yi S, Kühn U, Kim DH, Kim KB, Eckert J (2015) Fabrication of Fe-based bulk metallic glass by selective laser melting: a parameter study. Mater Des 86:703–70810.1016/j.matdes.2015.07.145 ↗
62. Xinyu Z, Weiyan Lü, Keqiang Q et al (2024) Highly wear-resistant and crack-free double-layer fe-based amorphous composite coatings by laser cladding. Spec Cast Nonferrous Alloys 44(05):692–698
63. Pauly S, Löber L, Petters R et al (2013) Processing metallic glasses by selective laser melting. Mater Today 16:37–4110.1016/j.mattod.2013.01.018 ↗
64. Ouyang Di, Xing W, Li N et al (2018) Structural evolutions in 3D-printed Fe-based metallic glass fabricated by selective laser melting. Addit Manuf 23:246–252
65. Nong XD, Zhou XL, Ren YX (2019) Fabrication and characterization of Fe-based metallic glasses by selective laser melting. Opt Laser Technol 109:20–2610.1016/j.optlastec.2018.07.059 ↗
66. Liang SX, Wang X, Zhang W et al (2020) Selective laser melting manufactured porous Fe-based metallic glass matrix composite with remarkable catalytic activity and reusability. Appl Mater Today 19:10054310.1016/j.apmt.2019.100543 ↗
67. Audebert F, Colaço R, Vilar R et al (2003) Production of glassy metallic layers by laser surface treatment. Scr Mater 48:281–28610.1016/S1359-6462(02)00382-2 ↗
68. Ning L, Zhang J, Wei X et al (2018) 3D printing of Fe-based bulk metallic glass composites with combined high strength and fracture toughness - ScienceDirect. Mater Des 143:285–29610.1016/j.matdes.2018.01.061 ↗
69. Jin H, Luo F, Chen Z et al (2025) Mechanical properties and corrosion resistance analysis of Fe-based amorphous −2% CNTs coatings with low crack prepared by laser cladding. Diamond Relat Mater 155:11228810.1016/j.diamond.2025.112288 ↗
70. Li Y, Liu Y, Zhan Y et al (2024) Peracetic acid-induced nanoengineering of Fe-based metallic glass ribbon in application of efficient drinking water treatment. Appl Catal B Environ Energy 355:12416110.1016/j.apcatb.2024.124161 ↗
71. Li C, Xingyu Xu, Wangrong Fu et al (2025) Effect of isothermal annealing on the corrosion resistance of detonation sprayed Fe-based amorphous coatings. J Mater Eng Perform 34:7826–783510.1007/s11665-024-09694-y ↗
72. Zhang L-C, Jia Z, Lyu F et al (2019) A review of catalytic performance of metallic glasses in wastewater treatment: recent progress and prospects. Prog Mater Sci 105:10057610.1016/j.pmatsci.2019.100576 ↗
73. Zhang CY, Yuan G, Zhang YX et al (2021) Cu-based amorphous alloy plates fabricated via twin-roll strip casting. Mater Sci Eng, A 828:14212310.1016/j.msea.2021.142123 ↗
74. Ikarashi K, Mizushima T, Makino A et al (2001) Preparation of the bulk Fe–Al–Ga–P–C–B–Si glassy alloys in a ringed form by copper mold casting. Mater Sci Eng, A 304–306:763–76610.1016/S0921-5093(00)01589-6 ↗
75. Chu Z, Teng S, Zhou Y et al (2021) The corrosion resistance and mechanism of AT13/Fe-based amorphous composite coatings. Micromachines 13:5610.3390/mi13010056 ↗
76. Scully JR, Gebert A, Payer JH (2007) Corrosion and related mechanical properties of bulk metallic glasses. J Mater Res 22:302–31310.1557/jmr.2007.0051 ↗
77. Botta WJ, Berger JE, Kiminami CS et al (2014) Corrosion resistance of Fe-based amorphous alloys. J Alloys Compd 586:S105–S11010.1016/j.jallcom.2012.12.130 ↗
78. Long ZL, Chang CT, Ding YH et al (2008) Corrosion behavior of Fe-based ferromagnetic (Fe, Ni)–B–Si–Nb bulk glassy alloys in aqueous electrolytes. J Non-Cryst Solids 354:4609–461310.1016/j.jnoncrysol.2008.06.009 ↗
79. Hua N, Hong X, Liao Z et al (2020) Corrosive wear behaviors and mechanisms of a biocompatible Fe-based bulk metallic glass. J Non-Cryst Solids 542:12008810.1016/j.jnoncrysol.2020.120088 ↗
80. Mariia L, Lidiya B, Nataliya P, et al. (2024) Iron and Chromium Influence on Crystallization Kinetics of Cobalt-Based Amorphous Alloys[M]: Springer Nature Switzerland, 443–452.10.1007/978-3-031-67519-5_30 ↗
81. Li C, Wang H, Li J et al (2023) Corrosion and mechanical properties of novel Fe-based bulk amorphous alloys. J Mater Eng Perform 32:3974–397910.1007/s11665-022-07371-6 ↗
82. Li WS, Xing J, Zhang J et al (2022) Microstructure and corrosion behavior in 3.5% NaCl solution of warm-pressed and sintered 316L stainless steel. Rare Metal Mater Eng 51(12):4714–4725
83. Zhang S, Jia M, Wang W et al (2024) The effects of heat treatment and surface state on the corrosion resistance of laser powder bed fusion 304L stainless steel in 3.5wt.% NaCl solution. J Mater Res Technol 29:5620–563210.1016/j.jmrt.2024.03.025 ↗
84. Chen X, Wang Z, Yu S et al (2024) Corrosion inhibition of carbon steel in NaCl solution using a mixture of alkanol amine and calcium nitrite: electrochemical and microscopic evaluation. Int J Electrochem Sci 19:10080210.1016/j.ijoes.2024.100802 ↗
85. Han J, Hong J, Kwon S et al (2021) Effect of Cr addition on magnetic properties and corrosion resistance of optimized Co and Fe-based amorphous alloys. Metals 11:30410.3390/met11020304 ↗
86. Zou Z, Liu Z, Yang L et al (2024) Corrosion behavior of different building planes of selective laser melting 316L stainless steel in 0.1M HCl solution. J Mater Res Technol 28:4738–475310.1016/j.jmrt.2024.01.078 ↗
87. Salvago G, Fumagalli G, Sinigaglia D (1983) The corrosion behaviour of AISI 304L stainless steel in 0.1 M HCl at room temperature—I. Corros Sci 23:507–51410.1016/0010-938X(83)90100-2 ↗
88. Salvago G, Sinigaglia D (1983) The corrosion behaviour of AISI 304 stainless steel in 0.1 M HCl at room temperature—III. the effect of sensitization. Corros Sci 23:1073–108410.1016/0010-938X(83)90089-6 ↗
89. Mathew ZP, Rajan K, Augustine C et al (2020) Corrosion inhibition of mild steel using poly (2-ethyl -2-oxazoline) in 0.1M HCl solution. Heliyon 6:e0556010.1016/j.heliyon.2020.e05560 ↗
90. Del Olmo R, Tynkevych O, Łazińska M et al (2025) Anodizing of iron-based alloys: fundamentals, recent progress, and applications. Iop Publishing 88(2):026501
91. Sun Y, Zhang S, Zhang J et al (2025) First-principles study of the effect of yttrium solid solution on the corrosion behavior of iron in Cl-containing environments. Mater Today Commun 43:11162010.1016/j.mtcomm.2025.111620 ↗
92. Wang W (2007) Roles of minor additions in formation and properties of bulk metallic glasses. Prog Mater Sci 52:540–59610.1016/j.pmatsci.2006.07.003 ↗
93. Long Z, Yong S, Xie G et al (2008) Enhanced soft-magnetic and corrosion properties of Fe-based bulk glassy alloys with improved plasticity through the addition of Cr. J Alloy Compd 462:52–5910.1016/j.jallcom.2007.07.117 ↗
94. Wang Li, Chao Y (2012) Corrosion behavior of Fe41Co7Cr15Mo14C15B6Y2 bulk metallic glass in NaCl solution. Mater Lett 69:76–7810.1016/j.matlet.2011.10.116 ↗
95. Yasir M, Zhang C, Wang W et al (2015) Wear behaviors of Fe-based amorphous composite coatings reinforced by Al2O3 particles in air and in NaCl solution. Mater Des 88:207–21310.1016/j.matdes.2015.08.142 ↗
96. Shi M, Pang S, Zhang T (2015) Towards improved integrated properties in FeCrPCB bulk metallic glasses by Cr addition. Intermetallics 61:16–2010.1016/j.intermet.2015.02.010 ↗
97. Duarte MJ, Klemm J, Klemm SO et al (2013) Element-resolved corrosion analysis of stainless-type glass-forming steels. Science 341:372–37610.1126/science.1230081 ↗
98. Xu K, Ling H, Li Q et al (2014) Effects of Co substitution for Fe on the glass forming ability and properties of Fe80P13C7 bulk metallic glasses. Intermetallics 51:53–5810.1016/j.intermet.2014.03.003 ↗
99. Guo M, Xue J, Li Y et al (2024) Effects of Cr addition on structure, magnetic properties and corrosion resistance of a Fe85.5B13Cu1.5 nanocrystalline alloy. J Mater Res Technol 30:2902–291010.1016/j.jmrt.2024.04.032 ↗
100. Wang S, Wei J, Hu H et al (2017) Roles of Co element in Fe-based bulk metallic glasses utilizing industrial FeB alloy as raw material. Prog Nat Sci Mater Int 27:503–50610.1016/j.pnsc.2017.08.004 ↗