Thin film quality of sol–gel SiO2 coatings prepared on Ti6Al4V depending on their composition and titanium substrate preparation
Source abstract
Abstract
Abstract The study examined the effect of chemical modification of the surface of the Ti6Al4V substrate in the form of etching with a 5 M NaOH base and etching with a 30% HNO3 + 3% HF acid mixture on sol–gel coatings quality. Two SiO2 coatings with different compositions were selected for testing: ISOM coating with a methyl group, –CH3, and IIBOM coating with a methyl group -CH3, epoxy group, –COC–, and amine group, –NH2. The quality of the coatings was examined in terms of their morphology, thickness, and destruction, as a result of mechanical factors: cross section test, static tensile test, friction test, and wear tear. The influence of chemical etching on functionalization of the titanium alloy substrate significantly influencing the applied properties of the sol–gel coating was demonstrated. The findings provide a foundation for future research on quality of sol–gel functionalized coatings on Ti6Al4V substrate. Graphical Abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Bahuguna G, Mishra NK, Chaudhary P, Kumar A, Singh R (2016) Thin film coating through sol-gel gel technique. Res J Chem Sci 6:65–72
2. Gonçalves MC (2018) Sol-gel silica nanoparticles in medicine: a natural choice: design synthesis and products. Molecules 23:2021. https://doi.org/10.3390/molecules2308202110.3390/molecules23082021 ↗
3. Jaroenworaluck A, Sunsaneeyametha W, Kosachan N, Stevens R (2006) Characteristics of silica-coated TiO 2 and its UV absorption for sunscreen cosmetic applications. Surf Interface Anal 38:473–477. https://doi.org/10.1002/sia.231310.1002/sia.2313 ↗
4. Li J, Bai H, Feng Z (2023) Advances in the modification of silane-based sol-gel coating to improve the corrosion resistance of magnesium alloys. Molecules 28:2563. https://doi.org/10.3390/molecules2806256310.3390/molecules28062563 ↗
5. Tihtih M, Ibrahim JEFM, Basyooni MA, En-nadir R, Hussainova I, Kocserha I (2023) Functionality and activity of sol–gel-prepared Co and Fe co-doped lead-free bto for thermo-optical applications. ACS Omega 8:5003–5016. https://doi.org/10.1021/acsomega.2c0766010.1021/acsomega.2c07660 ↗
6. Javadi A, Cobaj A, Soucek MD (2020) Handbook of waterborne coatings. Elsevier
7. Inagaki I, Takechi T, Shirai Y, Ariyasu N (2014) Application and features of titanium for the aerospace industry
8. Clare TL, Swartz NA (2015) Characterization of high performance protective coatings for use on culturally significant works. Intelligent Coatings for Corrosion Control 641–671. https://doi.org/10.1016/B978-0-12-411467-8.00019-210.1016/B978-0-12-411467-8.00019-2 ↗
9. Butt MA (2022) Thin-film coating methods: a successful marriage of high-quality and cost-effectiveness—a brief exploration. Coatings 1210.20944/preprints202207.0177.v1 ↗
10. Scherer CJ, Brinker i GW (1990) Sol-gel science: The physics and chemistry of sol-gel processing. San Diego
11. Brinker CJ, Frye GC, Hurd AJ, Ashley CS (1991) Fundamentals of sol-gel dip coating. Thin Solid Films 201:97–108. https://doi.org/10.1016/0040-6090(91)90158-T10.1016/0040-6090(91)90158-T ↗
12. McLean M, Malik A (2012) Sol–Gel materials in analytical microextraction. In: Comprehensive sampling and sample preparation. Elsevier, pp 311–32910.1016/B978-0-12-381373-2.00044-2 ↗
13. Wiglusz R (2011) Porfiryny zamknięte w żelu krzemionkowym. Wiadomości Chemiczne 7:675–703
14. Bokov D, Turki Jalil A, Chupradit S, Suksatan W, Javed Ansari M, Shewael IH, Valiev GH, Kianfar E (2021) Nanomaterial by sol-gel method: synthesis and application. Adv Mater Sci Eng 2021:1–21. https://doi.org/10.1155/2021/510201410.1155/2021/5102014 ↗
15. Tranquillo E, Bollino F (2020) Surface modifications for implants lifetime extension: an overview of sol-gel coatings. Coatings 10:589. https://doi.org/10.3390/coatings1006058910.3390/coatings10060589 ↗
16. Martin PM (2010) Surface preparation for film and coating deposition processes. Handbook of deposition technologies for films and coatings. William Andrew Publishing, pp 93–134
17. Kravchenko GA (2008) Crack Patterns in Thin Films and X-ray Optics Thermal Deformations. University of South Florida
18. Shenoy VB, Schwartzman AF, Freund LB (2001) Crack pattern in brittle thin films. Int J Fract 109:29–45. https://doi.org/10.1023/A:101097372975410.1023/A:1010973729754 ↗
19. Wan N, Xu J, Lin T, Xu L, Chen K (2009) Observation and model of highly ordered wavy cracks due to coupling of in-plane stress and interface debonding in silica thin films. Phys Rev B 80:014121. https://doi.org/10.1103/PhysRevB.80.01412110.1103/PhysRevB.80.014121 ↗
20. Chen J, Bull SJ (2011) Approaches to investigate delamination and interfacial toughness in coated systems: an overview. J Phys D Appl Phys 44:034001. https://doi.org/10.1088/0022-3727/44/3/03400110.1088/0022-3727/44/3/034001 ↗
21. Kozuka H (2016) Stress evolution and cracking in sol–gel-derived thin films. Handbook of sol-gel science and technology. Springer International Publishing, Cham, pp 1–37
22. Kappert EJ, Pavlenko D, Malzbender J, Nijmeijer A, Benes NE, Tsai PA (2015) Formation and prevention of fractures in sol–gel-derived thin films. Soft Matter 11:882–888. https://doi.org/10.1039/C4SM02085E10.1039/C4SM02085E ↗
23. Marcoen K, Gauvin M, De Strycker J, Terryn H, Hauffman T (2020) Molecular characterization of multiple bonding interactions at the steel oxide-aminopropyl triethoxysilane interface by ToF-SIMS. ACS Omega 5:692–700. https://doi.org/10.1021/acsomega.9b0333010.1021/acsomega.9b03330 ↗
24. Zheludkevich ML, Salvado IM, Ferreira MGS (2005) Sol–gel coatings for corrosion protection of metals. J Mater Chem 15:5099. https://doi.org/10.1039/b419153f10.1039/b419153f ↗
25. Liu S, Shin YC (2019) Additive manufacturing of Ti6Al4V alloy: A review. Mater Des 164:107552. https://doi.org/10.1016/J.MATDES.2018.10755210.1016/J.MATDES.2018.107552 ↗
26. Gurrappa I (2003) Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications. Mater Charact 51:131–139. https://doi.org/10.1016/J.MATCHAR.2003.10.00610.1016/J.MATCHAR.2003.10.006 ↗
27. Ram Prasad AVS, Koona R, Datta GL (2014) An experimental study of wire EDM on Ti-6Al-4V alloy. Proc Mater Sci 5:2567–2576. https://doi.org/10.1016/j.mspro.2014.07.51710.1016/j.mspro.2014.07.517 ↗
28. Tamayo JA, Riascos M, Vargas CA, Baena LM (2021) Additive manufacturing of Ti6Al4V alloy via electron beam melting for the development of implants for the biomedical industry. Heliyon 7:e06892. https://doi.org/10.1016/j.heliyon.2021.e0689210.1016/j.heliyon.2021.e06892 ↗
29. Zhang M, Pu X, Chen X, Yin G (2019) In-vivo performance of plasma-sprayed CaO–MgO–SiO2-based bioactive glass-ceramic coating on Ti–6Al–4V alloy for bone regeneration. Heliyon 5:e02824. https://doi.org/10.1016/J.HELIYON.2019.E0282410.1016/J.HELIYON.2019.E02824 ↗
30. Herrera P, Hernandez-Nava E, Thornton R, Slatter T (2023) Abrasive wear resistance of Ti-6AL-4V obtained by the conventional manufacturing process and by electron beam melting (EBM). Wear 524–525:204879. https://doi.org/10.1016/j.wear.2023.20487910.1016/j.wear.2023.204879 ↗
31. Lu WQ, Liu YJ, Wu X, Liu XC, Wang JC (2023) Corrosion and passivation behavior of Ti-6Al-4V surfaces treated with high-energy pulsed laser: a comparative study of cast and 3D-printed specimens in a NaCl solution. Surf Coat Technol 470:129849. https://doi.org/10.1016/j.surfcoat.2023.12984910.1016/j.surfcoat.2023.129849 ↗
32. Dommeti VK, Pramanik S, Roy S (2021) Effect of polyethylene glycol on surface coating of Ta2O5 onto titanium substrate in sol-gel technique. Acta Bioeng Biomech. https://doi.org/10.37190/ABB-01757-2020-0510.37190/ABB-01757-2020-05 ↗
33. Svagrova K (2019) Optimazation of composition and formation of titania sol-gel coatings on titanium substrate using dip-coating technique. Ceram Silik. https://doi.org/10.13168/cs.2019.001810.13168/cs.2019.0018 ↗
34. Jaafar A, Hecker C, Árki P, Joseph Y (2020) Sol-gel derived hydroxyapatite coatings for titanium implants: a review. Bioengineering 7:127. https://doi.org/10.3390/bioengineering704012710.3390/bioengineering7040127 ↗
35. Blohowiak KY, Osborne JH, Krienke KA (1999) US5869141A
36. Amer MS, Durgam L, El-Ashry MM (2006) Raman mapping of local phases and local stress fields in silicon–silicon carbide composites. Mater Chem Phys 98:410–414. https://doi.org/10.1016/j.matchemphys.2005.09.06610.1016/j.matchemphys.2005.09.066 ↗
37. Paszkowski M, Wieleba W, Wróblewski R (2010) Research of the adhesion of steel and plastics in the context of thier application in frictional couples. Tribologia
38. Polish Committe for Standardization (2021) PN-EN ISO 2409:2021-03
39. Kowalewski P, Wieleba W, Leśniewski T (2007) Tribological test rig for cyclic rolling and sliding contacts. Tribologia
40. van Drunen J, Zhao B, Jerkiewicz G (2011) Corrosion behavior of surface-modified titanium in a simulated body fluid. J Mater Sci 46:5931–5939. https://doi.org/10.1007/s10853-011-5548-y10.1007/s10853-011-5548-y ↗
41. Bandeira RM, Rêgo GC, Picone CA, van Drunen J, Correr WR, Casteletti LC, Machado SAS, Tremiliosi-Filho G (2020) Alternating current oxidation of Ti–6Al–4V alloy in oxalic acid for corrosion resistant surface finishing. SN Appl Sci 2:1092. https://doi.org/10.1007/s42452-020-2905-y10.1007/s42452-020-2905-y ↗
42. LjD A, Kormann C, Plieth W (1991) Electrochemical synthesis and in situ Raman spectroscopy of thin films of titanium dioxide. J Raman Spectrosc 22:573–575. https://doi.org/10.1002/jrs.125022100610.1002/jrs.1250221006 ↗
43. Deo G, Turek AM, Wachs IE, Machej T, Haber J, Das N, Eckert H, Hirt AM (1992) Physical and chemical characterization of surface vanadium oxide supported on titania: influence of the titania phase (anatase, rutile, brookite and B). Appl Catal A Gen 91:27–42. https://doi.org/10.1016/0926-860X(92)85176-C10.1016/0926-860X(92)85176-C ↗
44. Smith JR, Walsh FC, Clarke RL (1998) Electrodes based on Magne li phase titanium oxides: the properties and applications of Ebonex Ò materials10.1023/A:1003469427858 ↗
45. Obeso-Estrella R, Pawelec B, Mota N, Flores L, Melgoza JMQ, Yocupicio-Gaxiola RI, Zepeda TA (2022) Elucidating the mechanisms of titanium–induced morphological and structural changes in catalysts on mesoporous Al2O3–TiOx mixed oxides: effect of non–stoichiometric TiOx phase. Microporous Mesoporous Mater 339:111991. https://doi.org/10.1016/j.micromeso.2022.11199110.1016/j.micromeso.2022.111991 ↗
46. Szczuka J, Sandomierski M, Buchwald T (2022) Formation of the octadecylphosphonic acid layer on the surface of Ti6Al4V ELI titanium alloy and analysis using Raman spectroscopy. Spectrochim Acta A Mol Biomol Spectrosc 265:120368. https://doi.org/10.1016/j.saa.2021.12036810.1016/j.saa.2021.120368 ↗
47. Ekoi EJ, Gowen A, Dorrepaal R, Dowling DP (2019) Characterisation of titanium oxide layers using Raman spectroscopy and optical profilometry: Influence of oxide properties. Results Phys 12:1574–1585. https://doi.org/10.1016/j.rinp.2019.01.05410.1016/j.rinp.2019.01.054 ↗
48. Łęcka KM, Gąsiorek J, Mazur-Nowacka A, Szczygieł B, Antończak AJ (2019) Adhesion and corrosion resistance of laser-oxidized titanium in potential biomedical application. Surf Coat Technol 366:179–189. https://doi.org/10.1016/j.surfcoat.2019.03.03210.1016/j.surfcoat.2019.03.032 ↗
49. Chen Y, Mao J (2014) Sol–gel preparation and characterization of black titanium oxides Ti2O3 and Ti3O5. J Mater Sci: Mater Electron 25:1284–1288. https://doi.org/10.1007/s10854-014-1723-710.1007/s10854-014-1723-7 ↗
50. Su Y, Komasa S, Sekino T, Nishizaki H, Okazaki J (2016) Nanostructured Ti6Al4V alloy fabricated using modified alkali-heat treatment: characterization and cell adhesion. Mater Sci Eng, C 59:617–623. https://doi.org/10.1016/j.msec.2015.10.07710.1016/j.msec.2015.10.077 ↗
51. Say WC, Tsai YY (2004) Surface characterization of cast Ti-6Al-4V in hydrofluoric-nitric pickling solutions. Surf Coat Technol 176:337–343. https://doi.org/10.1016/S0257-8972(03)00747-310.1016/S0257-8972(03)00747-3 ↗
52. Hung K-Y, Lin Y-C, Feng H-P (2017) The effects of acid etching on the nanomorphological surface characteristics and activation energy of titanium medical materials. Materials 10:1164. https://doi.org/10.3390/ma1010116410.3390/ma10101164 ↗
53. Duboust N, Ghadbeigi H, Pinna C, Ayvar-Soberanis S, Collis A, Scaife R, Kerrigan K (2017) An optical method for measuring surface roughness of machined carbon fibre-reinforced plastic composites. J Compos Mater 51:289–302. https://doi.org/10.1177/002199831664484910.1177/0021998316644849 ↗
54. Strnad G, Chirila N (2015) Corrosion rate of sand blasted and acid etched Ti6Al4V for dental implants. Procedia Technol 19:909–915. https://doi.org/10.1016/j.protcy.2015.02.13010.1016/j.protcy.2015.02.130 ↗
55. Aufa AN, Hassan MZ, Ismail Z, Harun N, Ren J, Sadali MF (2022) Surface enhancement of Ti–6Al–4V fabricated by selective laser melting on bone-like apatite formation. J Market Res 19:4018–4030. https://doi.org/10.1016/j.jmrt.2022.06.13510.1016/j.jmrt.2022.06.135 ↗
56. Balakrishnan A, Lee BC, Kim TN, Panigrahi BB (2007) Hydroxyapatite coatings on NaOH treated Ti–6Al–4V alloy using sol–gel precursor. Mater Sci Technol 23:1005–1007. https://doi.org/10.1179/174328407X15738010.1179/174328407X157380 ↗
57. Alberti CJ, Saito E, de Freitas FE, Reis DAP, Machado JPB, dos Reis AG (2019) Effect of etching temperature on surface properties of Ti6Al4V alloy for use in biomedical applications. Mater Res. https://doi.org/10.1590/1980-5373-mr-2018-078210.1590/1980-5373-mr-2018-0782 ↗
58. Sun C, Berg JC (2002) Effect of moisture on the surface free energy and acid–base properties of mineral oxides. J Chromatogr A 969:59–72. https://doi.org/10.1016/S0021-9673(02)00231-510.1016/S0021-9673(02)00231-5 ↗
59. Hitchcock SJ, Carroll NT, Nicholas MG (1981) Some effects of substrate roughness on wettability. J Mater Sci 16:714–732. https://doi.org/10.1007/BF0240278910.1007/BF02402789 ↗
60. Ponsonnet L, Reybier K, Jaffrezic N, Comte V, Lagneau C, Lissac M, Martelet C (2003) Relationship between surface properties (roughness, wettability) of titanium and titanium alloys and cell behaviour. Mater Sci Eng, C 23:551–560. https://doi.org/10.1016/S0928-4931(03)00033-X10.1016/S0928-4931(03)00033-X ↗
61. Fernández-Hernán JP, López AJ, Torres B, Rams J (2021) Influence of roughness and grinding direction on the thickness and adhesion of sol-gel coatings deposited by dip-coating on AZ31 magnesium substrates: a Landau-Levich equation revision. Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2020.12679810.1016/j.surfcoat.2020.126798 ↗
62. Ebnesajjad S (2014) Surface tension and its measurement. In: Surface treatment of materials for adhesive bonding. Elsevier, pp 7–2410.1016/B978-0-323-26435-8.00002-2 ↗
63. Rudawska A (2019) Assessment of surface preparation for the bonding/adhesive technology. In: Surface treatment in bonding technology. Elsevier, pp 227–27510.1016/B978-0-12-817010-6.00009-6 ↗
64. Schoff CK (2017) Craters and other coatings defects: mechanisms and analysis. Protective coatings. Springer, Cham, pp 403–42510.1007/978-3-319-51627-1_18 ↗
65. Fernández-Hernán JP, López AJ, Torres B, Rams J (2021) Influence of roughness and grinding direction on the thickness and adhesion of sol-gel coatings deposited by dip-coating on AZ31 magnesium substrates: a Landau-Levich equation revision. Surf Coat Technol 408:126798. https://doi.org/10.1016/j.surfcoat.2020.12679810.1016/j.surfcoat.2020.126798 ↗
66. Davis SR, Brough AR, Atkinson A (2003) Formation of silica/epoxy hybrid network polymers. J Non Cryst Solids 315:197–205. https://doi.org/10.1016/S0022-3093(02)01431-X10.1016/S0022-3093(02)01431-X ↗
67. Gąsiorek J, Gąsiorek A, Babiarczuk B, Jones W, Simka W, Detyna J, Kaleta J, Krzak J (2022) Anticorrosion properties of silica-based sol-gel coatings on steel—The influence of hydrolysis and condensation conditions. Ceram Int 48:37150–37163. https://doi.org/10.1016/j.ceramint.2022.08.29110.1016/j.ceramint.2022.08.291 ↗
68. Polish Committe for Standardization (2005) PN-EN 1071–3
69. Tkaczyk M, Krzak-Ros J, Kaleta J (2012) Evaluation of mechanical and physicochemical properties of protection coatings obtained by the sol-gel method. Mater Sci 48:323–331. https://doi.org/10.1007/s11003-012-9509-710.1007/s11003-012-9509-7 ↗
70. Gąsiorek J, Mazur-Nowacka A, Szczurek A, Babiarczuk B, Tic WJ, Guziałowska-Tic J, Kaleta J, Krzak J (2021) Influence of zirconia and organic additives on mechanical and electrochemical properties of silica sol-gel coatings. Materials. https://doi.org/10.3390/ma1409238910.3390/ma14092389 ↗
71. Gąsiorek J, Gąsiorek A, Babiarczuk B, Jones W, Simka W, Detyna J, Kaleta J, Krzak J (2022) Anticorrosion properties of silica-based sol-gel coatings on steel—the influence of hydrolysis and condensation conditions. Ceram Int. https://doi.org/10.1016/j.ceramint.2022.08.29110.1016/j.ceramint.2022.08.291 ↗
72. Figueira RB (2020) Hybrid sol–gel coatings for corrosion mitigation: a critical review. Polymers (Basel) 12:689. https://doi.org/10.3390/polym1203068910.3390/polym12030689 ↗