Microstructure and properties evolutions of powder metallurgy TA15 titanium plates by a novel hot rolling method
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Banerjee D, Williams JC (2013) Perspectives on titanium science and technology. Acta Mater 61:844–87910.1016/j.actamat.2012.10.043 ↗
2. Zhao QY, Sun QY, Xin SW, Chen YN, Wu C, Wang H, Xu JW, Wan MP, Zeng WD, Zhao YQ (2022) High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process. Mater Sci Eng A 845:14326010.1016/j.msea.2022.143260 ↗
3. Niu HZ, Zhang HR, Sun QQ, Zhang DL (2019) Breaking through the strength-ductility trade-off dilemma in powder metallurgy Ti-6Al-4V titanium alloy. Mater Sci Eng A 754:361–36910.1016/j.msea.2019.03.089 ↗
4. Luo XK, Wang YM, Dang N, Tian K, Wang K, Zhao CL, Zha XH, Wang X, Yu Y (2022) Gradient microstructure and foreign-object-damaged fatigue properties of Ti6Al4V titanium alloy processed by the laser shock peening and subsequent shot peening. Mater Sci Eng A 849:14339810.1016/j.msea.2022.143398 ↗
5. Soro N, Attar H, Wu XH, Dargusch MS (2019) Investigation of the structure and mechanical properties of additively manufactured Ti-6Al-4V biomedical scaffolds designed with a Schwartz primitive unit-cell. Mater Sci Eng A 745:195–20210.1016/j.msea.2018.12.104 ↗
6. Lei ZN, Gao PF, Wang XX, Zhan M, Li HW (2021) Analysis of anisotropy mechanism in the mechanical property of titanium alloy tube formed through hot flow forming. J Mater Sci Technol 86:77–9010.1016/j.jmst.2021.01.038 ↗
7. Wu XG, Zhang BW, Zhang YY, Niu HZ, Zhang DL (2021) Correlation between microstructures and tensile deformation behavior of a PM near α Ti-6Al-2Sn-4Zr-2Mo-0.1Si alloy. Mater Sci Eng A 825:14190910.1016/j.msea.2021.141909 ↗
8. He ST, Zeng WD, Zhao ZB, Xu JW, Zhou DD (2022) Analysis of anisotropy mechanism in relation with slip activity in near α titanium alloy pipe after Pilger cold rolling. J Alloy Compd 909:16478510.1016/j.jallcom.2022.164785 ↗
9. Zhang HR, Niu HZ, Zang MC, Tan H, Zhang DL (2021) β-transformed domains enhanced tensile properties and the related deformation behavior of a near alpha titanium alloy. Mater Sci Eng A 825:14190210.1016/j.msea.2021.141902 ↗
10. Zhang TL, Huang ZH, Yang T, Kong HJ, Luan JH, Wang AD, Wang D, Kuo W, Wang YZ, Liu CT (2021) In situ design of advanced titanium alloy with concentration modulations by additive manufacturing. Science 374:478–48210.1126/science.abj3770 ↗
11. Zhang JY, Qian BN, Wu YJ, Wang Y, Cheng J, Chen Z, Li JS, Sun F, Prima F (2021) A kink-bands reinforced titanium alloy showing 1.3 GPa compressive yield strength: towards extra high-strength/strain-transformable Ti alloys. J Mater Sci Technol 74:21–2610.1016/j.jmst.2020.10.004 ↗
12. Chong Y, Tsuru T, Guo BQ, Gholizadeh R, Inoue K, Tsuji N (2022) Ultrahigh yield strength and large uniform elongation achieved in ultrafne-grained titanium containing nitrogen. Acta Mater 240:11835610.1016/j.actamat.2022.118356 ↗
13. Duz V, Matviychuk M, Klevtsov A, Moxson V (2017) Industrial application of titanium hydride powder. Met Powder Rep 72:30–3810.1016/j.mprp.2016.02.051 ↗
14. El-Soudani SM, Yu KO, Crist EM, Sun FS, Campbell MB, Esposito TS, Phillips JJ, Moxson V, Duz VA (2013) Optimization of blended-elemental powder-based titanium alloy extrusions for aerospace applications. Metall Mater Trans A 44:899–91010.1007/s11661-012-1437-5 ↗
15. Luo YF, Xie YH, Zeng W, Liang JM, Zhang DL (2019) Microstructure and mechanical properties of Ti-6Al-4V rods fabricated by powder compact extrusion of TiH2/Al60V40 powder blend. Metall Mater Trans A 50A:1643–165410.1007/s11661-019-05116-0 ↗
16. Huang LG, Kong F, Chen Y, Xiao S (2013) Microstructure and tensile properties of Ti-6Al-4V-0.1B alloys of direct rolling in the near β phase region. Mater Sci Eng A 560:140–14710.1016/j.msea.2012.09.048 ↗
17. Huang LG, Chen Y, Kong F, Xu L, Xiao S (2013) Direct rolling of Ti-6Al-4V-0 1B alloy sheets in the β phase region. Mater Sci Eng A 577:1–810.1016/j.msea.2013.04.038 ↗
18. Murty SVSN, Nayan N, Kumar P, Narayanan PR, Sharma SC, George KM (2014) Microstructure-texture-mechanical properties relationship in multi-pass warm rolled Ti-6Al-4V Alloy. Mater Sci Eng A 589:174–18110.1016/j.msea.2013.09.087 ↗
19. Zhao QY, Chen YN, Xu YK, Torrens R, Bolzoni L, Yang F (2021) Cost-affordable and qualified powder metallurgy metastable beta titanium alloy by designing short-process consolidation and processing. Mater Des 200:10945710.1016/j.matdes.2021.109457 ↗
20. Qi LC, Qiao XL, Huang LJ, Huang X, Xiao WL, Zhao XQ (2019) Effect of cold rolling deformation on the microstructure and properties of Ti-10V-2Fe-3Al alloy. Mater Char 155:10978910.1016/j.matchar.2019.109789 ↗
21. Wen JX, Cao R, Gao YF (2020) Mysterious failure in load-free superalloys under repeated thermal shocks. Acta Mater 194:276–28210.1016/j.actamat.2020.05.002 ↗
22. Wang YN, Huang JC (2003) Texture analysis in hexagonal materials. Mater Chem Phys 81(1):11–2610.1016/S0254-0584(03)00168-8 ↗
23. Zhao J, Lv L, Wang K, Liu G (2020) Effects of strain state and slip mode on the texture evolution of a near-α TA15 titanium alloy during hot deformation based on crystal plasticity method. J Mater Sci Technol 38:125–13410.1016/j.jmst.2019.07.051 ↗
24. Agrawal P, Karthikeyan S, Makineni SK, Gault B, Banerjee D (2022) Dynamic strain aging in the intermediate temperature regime of near-α titanium alloy, IMI 834: Experimental and modeling. Acta Mater 222:11743610.1016/j.actamat.2021.117436 ↗
25. Chen W, Lv YP, Wang HD, Zhang XY, Chen C, Lin YC, Zhou KC (2020) On the 10 1 1 twin-accommodated mechanisms in equiaxed near β-Ti alloys operating by unidirectional and cross rolling. Mater Sci Eng A 769:13851610.1016/j.msea.2019.138516 ↗
26. Huang LG, Kong F, Chen Y, Xiao SL (2013) Microstructure and tensile properties of Ti-6Al-4V-0 1B alloys of direct rolling in the near β phase region. Mater Sci Eng A 560:140–14710.1016/j.msea.2012.09.048 ↗
27. Su Y, Fan HY, You FH, Kong FT, Wang XP, Chen YY (2020) Improved tensile properties of a novel near-α titanium alloy via tailoring microstructure by hot-rolling. Mater Sci Eng A 790:13958810.1016/j.msea.2020.139588 ↗
28. Hu S, Tan YB, Shi W, Ran Q, Ji XM, Xiang S (2022) Microstructure, texture evolution and mechanical behavior of Ti-3 5Al-5Mo-4V titanium alloy during hot rolling in a β feld. Mater. Today Commun. 31:10350610.1016/j.mtcomm.2022.103506 ↗
29. O’Flynn J, Corbin SF (2019) Effects of powder material and process parameters on the roll compaction, sintering and cold rolling of titanium sponge. Powder Metall 62(5):1–15
30. Xu RJ, Liu B, Yan ZQ, Chen F, Guo WM, Liu Y (2019) Low-cost and high-strength powder metallurgy Ti-Al-Mo-Fe alloy and its application. J Mater Sci 54(18):12049–12060https://doi.org/10.1007/s10853-019-03734-y10.1007/s10853-019-03734-y ↗
31. Govender A, Bemont C, Chikosha S (2021) Sintering high green density direct powder rolled titanium strips, in argon atmosphere. Metals 11(6):93610.3390/met11060936 ↗
32. Zhou Y, Yang F, Chen CG, Shao YR, Lu BX, Lu TX, Sui YL, Guo ZM (2021) Mechanical property enhancement of high-plasticity powder metallurgy titanium with a high oxygen concentration. J Alloy Compd 885:16100610.1016/j.jallcom.2021.161006 ↗
33. Gao Y, Zhang C, Zhang JZ, Lu X (2024) Microstructure evolution and strengthening mechanism of high-performance powder metallurgy TA15 titanium alloy by hot rolling. Int J Miner Metall Mater. https://doi.org/10.1007/s12613-0210.1007/s12613-02 ↗
34. Roy S, Suwas S (2013) Microstructure and texture evolution during sub-transus thermomechanical processing of Ti-6Al-4V-0.1 B alloy: part I Hot rolling in (α+ β) phase field. Metall Mater Trans A 44:3303–332110.1007/s11661-013-1672-4 ↗
35. Wang SH, Zhang WC, Wang HX, Yang JL, Chen WZ, Cui GR, Wang GF (2021) Microstructures evolution, texture characteristics and mechanical properties of Mg-2.5Nd-0.5Zn-0.5Zr alloy during the high strain rate hot-rolling. Mater Sci Eng A 803:14048810.1016/j.msea.2020.140488 ↗
36. Guo J, He QY, Mei QS, Huang X, Wu GL, Mishin OV (2022) Gradient microstructure, recrystallization and mechanical properties of copper processed by high pressure surface rolling. J Mater Sci Technol 126:182–19010.1016/j.jmst.2022.03.011 ↗
37. Shi BQ, Zhao LY, Shang XL, Nie BH, Chen DC, Li CQ, Cheng YQ (2022) Reduction effect of final-pass heavy reduction rolling on the texture development, tensile property and stretch formability of ZWK100 alloy plates. J Mater Sci Technol 111:211–22310.1016/j.jmst.2021.09.042 ↗
38. Li YX, Gao PF, Yu JY, Jin S, Chen SQ, Zhan M (2022) Mesoscale deformation mechanisms in relation with slip and grain boundary sliding in TA15 titanium alloy during tensile deformation. J Mater Sci Technol 98:72–8610.1016/j.jmst.2021.05.008 ↗
39. Wen X, Wan MP, Huang CW, Tan YB, Lei M, Liang YL, Cai X (2019) Effect of microstructure on tensile properties, impact toughness and fracture toughness of TC21 alloy. Mater Des 180:10789810.1016/j.matdes.2019.107898 ↗
40. Chong Y, Zhang RP, Hooshmand MS, Zhao ST, Chrzan DC, Asta M, Morris JW, Minor AM (2021) Elimination of oxygen sensitivity in α-titanium by substitutional alloying with Al. Nat Commun 12(1):615810.1038/s41467-021-26374-w ↗
41. Guan B, Xin YC, Huang XX, Liu CL, Wu PD, Liu Q (2022) The mechanism for an orientation dependence of grain boundary strengthening in pure titanium. Int J Plast 153:10327610.1016/j.ijplas.2022.103276 ↗
42. Lee MS, Jo AR, Hwang SK, Hyun YT, Jun TS (2021) The role of strain rate and texture in the deformation of commercially pure titanium at cryogenic temperature. Mater Sci Eng A 827:14204210.1016/j.msea.2021.142042 ↗
43. Wu HP, Peng HL, Li XF, Chen J (2019) Effect of hydrogen addition on diffusion bonding behavior of Ti-55 alloy. Mater Sci Eng A 739:244–25310.1016/j.msea.2018.10.032 ↗
44. Xu WC, Shen DB, Wang ZL, Yang GP, Lu Y, Kang DC (2007) Effect of spinning deformation on microstructure evolution and mechanical property of TA15 titanium alloy. Trans Nonferrous Met Soc China 17:1205–121110.1016/S1003-6326(07)60250-7 ↗
45. Sun QJ, Xie X (2018) Microstructure and mechanical properties of TA15 alloy after thermo-mechanical processing. Mater Sci Eng A 724:493–50110.1016/j.msea.2018.03.109 ↗
46. Sun ZC, Zhang J, Yang H, Wu HL (2015) Effect of workpiece size on microstructure evolution of different regions for TA15 Ti-alloy isothermal near-β forging by local loading. J Mater Process Technol 222:234–24310.1016/j.jmatprotec.2015.02.039 ↗
47. Zhou YG, Zeng WD, Yu HQ (2005) An investigation of a new near-beta forging process for titanium alloys and its application in aviation components. Mater Sci Eng A 393:204–21210.1016/j.msea.2004.10.016 ↗
48. Huang DM, Wang HL, Chen X, Chen Y, Guo H (2013) Influence of forging process on microstructure and mechanical properties of large section Ti-6 5Al-1Mo-1V-2Zr alloy bars. Trans Nonferrous Met Soc China 23:276–228210.1016/S1003-6326(13)62729-6 ↗
49. Sun Z, Yang H (2009) Microstructure and mechanical properties of TA15 titanium alloy under multi-step local loading forming. Mater Sci Eng A 523:184–19210.1016/j.msea.2009.05.058 ↗
50. Zhou W, Sun Z, Zuo S, He Y, Fan X (2011) Shape Optimization of Initial Billet for TA15 Ti-alloy complex components preforming, rare met. Mater Eng 40:951–956
51. Yang DK, Cizek P, Fabijanic D, Wang JT, Hodgson PD (2013) Work hardening in ultrafine-grained titanium: multilayering and grading. Acta Mater 61(8):2840–285210.1016/j.actamat.2013.01.018 ↗
52. Ma XK, Li JH, Chen Z, Li JY, Zhao XJ, Li FG (2022) Abnormal work hardening in a TRIP-assisted metastable β titanium alloy under high strain rate loading. Mater Sci Eng A 838:14281310.1016/j.msea.2022.142813 ↗
53. Wang XQ, Han WZ (2023) Oxygen-gradient titanium with high strength, strain hardening and toughness. Acta Mater 246:11867410.1016/j.actamat.2023.118674 ↗
54. Zhu XJ, Fan QB, Liu X, Yu H, Wang DD (2021) Microstructure evolution and mechanical properties of a hot-rolled Ti alloy. Prog Nat Sci 31(1):105–11210.1016/j.pnsc.2020.11.007 ↗
55. Yang JH, Wei S, Ji W, Chang RH, Lu ZC, Xiao SL, Chen YY, Zhou HT (2022) Microstructure evolution, mechanical properties and high temperature deformation of (TiB+TiC)/Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe titanium alloy. Mater Char 184:11161610.1016/j.matchar.2021.111616 ↗
56. Qian W, Zhao YT, Kai XZ, Gao X, Jin LW, Huang LY (2021) Evolution of microstructure and mechanical properties influenced by nanosized precipitates during rolling deformation. J Alloy Compd 858:15768710.1016/j.jallcom.2020.157687 ↗
57. Wang DD, Fan QB, Cheng XW, Zhou Y, Shi R, Qian Y, Wang L, Zhu XJ, Gong HC, Chen K, Yuan JJ, Yang L (2022) Texture evolution and slip mode of a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr dual-phase alloy during cold rolling based on multiscale crystal plasticity finite element model. J Mater Sci Technol 111:76–8710.1016/j.jmst.2021.09.030 ↗
58. Wang DD, Fan QB, Shi R, Zhou Y, Gong HC, Wang L, Xue YF, Ren Y (2020) In-situ investigation via high energy X-ray diffraction of stress-induced (0002)α→(110)β transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr alloy. Mater Sci Eng A 779:13915410.1016/j.msea.2020.139154 ↗
59. Wang T, Yang L, Tang ZF, Wu L, Yan HY, Liu C, Ma YZ, Liu WS, Yu ZJ (2022) Microstructure, mechanical properties and deformation mechanism of powder metallurgy AZ31 magnesium alloy during rolling. Mater Sci Eng A 844:14304210.1016/j.msea.2022.143042 ↗
60. Li WY, Chen ZY, Liu JR, Zhu SX, Sui GX, Wang QJ (2019) Rolling texture and its effect on tensile property of a near-α titanium alloy Ti60 plate. J Mater Sci Technol 35(5):790–79810.1016/j.jmst.2018.10.032 ↗